Blar i Institutt for energi og prosessteknikk på tidsskrift "Chemical Engineering Journal"
Viser treff 1-10 av 10
-
Cost-effective clean ammonia production using membrane-assisted autothermal reforming
(Peer reviewed; Journal article, 2020)Ammonia is a widely produced industrial chemical, primarily for use in the fertilizer industry. Recently, interest has also grown in ammonia as a carbon-free energy carrier because it is easier to store and transport than ... -
Experimental demonstration of pressurized chemical looping combustion inan internally circulating reactor for power production with integrated CO2capture
(Peer reviewed; Journal article, 2020)This study presents an experimental demonstration of pressurized chemical looping combustion (CLC) in an internally circulating reactor (ICR). The ICR concept is a novel alternative to the conventional interconnected ... -
Grid-independent Eulerian-Lagrangian approaches for simulations of solid fuel particle combustion
(Journal article; Peer reviewed, 2020)In this study, a computational fluid dynamics (CFD) model with three coarse graining algorithms is developed with the implementation of a layer based thermally thick particle model. Three additional coupling methods, cube ... -
High-temperature pyrolysis modeling of a thermally thick biomass particle based on an MD-derived tar cracking model
(Peer reviewed; Journal article, 2021)Biomass pyrolysis in the thermally thick regime is an important thermochemical phenomenon encountered in many different types of reactors. In this paper, a particle-resolved algorithm for thermally thick biomass particle ... -
Internally circulating fluidized-bed reactor for syngas production using chemical looping reforming
(Peer reviewed; Journal article, 2018)Chemical looping reforming (CLR) is a promising method for achieving autothermal methane reforming without the energy penalty of an air separation unit that is required for partial oxidation (POX) or oxygen-blown autothermal ... -
Phase transition enabled durable anti-icing surfaces and its DIY design
(Journal article; Peer reviewed, 2019)Generally, the longevity and durability of slippery liquid infused porous surfaces (SLIPS) applied for anti-icing purpose are of great challenge. In this work, phase transformable slippery liquid infused porous surfaces ... -
Selective recovery of silver from copper impurities by electrodialysis: Tailoring monovalent selective cation exchange membranes by monomolecular layer deposition
(Peer reviewed; Journal article, 2023)Selective recovery of silver from secondary resources enriched with copper impurities is a well-known challenge but is urgently needed by the industry. This study addresses the challenge by developing a highly efficient ... -
Sorbents screening for post-combustion CO2 capture via combined temperature and pressure swing adsorption
(Peer reviewed; Journal article, 2020)Adsorption-based post-combustion CO2 capture is enjoying significant research attention due to its potential for significant reductions in energy penalty, cost and environmental impact. Recent sorbent development work has ... -
Tailoring anion exchange membranes for palladium recovery from industrial solutions using electrodialysis
(Journal article; Peer reviewed, 2024)Limited natural reserves and extensive use of palladium across various industries make it urgent to implement efficient recovery strategies. Despite its unique advantages, the use of ion exchange membranes in electrodialysis ... -
The swing adsorption reactor cluster (SARC) for post combustion CO2 capture: Experimental proof-of-principle
(Journal article; Peer reviewed, 2018)This paper presents the first experimental demonstration of the novel swing adsorption reactor cluster (SARC) for post combustion CO2 capture. The SARC concept combines a temperature and vacuum swing for sorbent regeneration. ...