Blar i Fakultet for ingeniørvitenskap (IV) på dokumenttype "Master thesis"
Viser treff 41-60 av 10647
-
3D Numerical Modelling of Sediment Fluxes at Paso Ancho Hydropower Project
(Master thesis, 2019)The purpose of this thesis was to setup a three-dimensional numerical model on SSIIM 2 for the peaking pond of the Paso Ancho Hydropower Project. Not limited to numerical model, failure reasons for the desander is also ... -
3D Numerical Modelling of Sediment Transport under Current and Waves
(Master thesis, 2013)The sediment transport module of REEF3D is used to calculate the scour and the deposition pattern for abutment, pier and contraction under constant discharge and for pier under waves. The time development of scour for all ... -
3D NUMERISK MODELLERING AV DELER AV VANNVEGEN TIL TONSTAD KRAFTVERK
(Master thesis, 2013)Denne masteroppgåva handlar om bruk av numerisk modellering («Computational Fluid Dynamics», CFD) i høve til sandfang 3 ved Tonstad kraftverk. Oppgåva tek utgangspunkt i geometri og feltmålingar frå sandfanget. For å ... -
3D Printing and Carbonization of High Performing Polyimide Formulations
(Master thesis, 2019)Stereolitografisk 3D-printing (SLA) er en moden form for additiv tilvirkning, og blir i økende grad brukt til produksjon av deler som inngår i et ferdig produkt. I denne oppgaven utforskes muligheten for å bruke SLA til ... -
3D Reuse in PLM for Conceptual Ship Design
(Master thesis, 2017)Today 3D CAD tools have become more and more used in design processes, allowing amongst other better visualization of product, computer analysis of design, etc. Even so, in ship design, 3d-design is still combined with 2D ... -
3D robot vision using multiple cameras
(Master thesis, 2016)3D computer vision has in recent years become more popular in regards to robotic vision systems. This thesis looks into the possibility of using a multiple 3D camera setup for robotic vision. The approach is to reconstruct ... -
3D Scanning of Corroded Mooring Chain
(Master thesis, 2016)This thesis is concerned with mooring line failure and 3D representations of corroded chain surfaces. Equipment for making such representations have been evaluated through a feasibility study carried out at NTNU. An ATOS ... -
3D seismic analysis of salt tectonics and depositional systems in the Kwanza Basin (offshore Angola): from basin dynamics to geohazard analysis
(Master thesis, 2012)This thesis uses the combination of 2D and 3D seismic data and seismic attributes to investigate and understand the interaction between the salt tectonics and depositional systems in the Kwanza Basin (offshore Angola-block ... -
3D Seismic Interpretation and Evaluation of Survey Area SG9803, Caurus Prospect, SW Barents Sea
(Master thesis, 2013)3D seismic survey SG9803 was carried out in 1998 in the south-western Barents Sea. On the basis of 3D seismic data a wildcat well 7222/11-1 in platform area of Loppa High was drilled in 2008. This prospect is called Caurus. ... -
3D seismic interpretation in a deep-marine depositional environment from Lower Congo Basin offshore Angola
(Master thesis, 2013)3D seismic data from the offshore Congo Basin, Angola has been performed in order to do geological interpretation of deep-marine deposits and understand the depositional system in the basin. Architectural elements, such ... -
3D seismic interpretation in a deep-water depositional environment from Lower Congo Basin
(Master thesis, 2013)This Master of Science (M.Sc.) thesis focuses on the detailed characterization and interpretation of deep-water depositional system within Lower Congo Basin, offshore Angola. The application of seismic geomorphology has ... -
3D Seismic Modelling of Thin Intrusions
(Master thesis, 2014)This study presents seismic modeling of two intrusions, modeled as boreholes.The modeling was done over homogenous one-layered models in both 2D and 3D,and a two-layered model in 3D. The goal of the study was to see if ... -
3D Simulering av pumpeturbinkarakteristikker
(Master thesis, 2009)I oppgaven har karakteristikkene for en pumpeturbin blitt simulert. Verktøyet for simuleringene har vært OpenFOAM. Griddene til simuleringene ble laget i Gambit og ble importert til OpenFOAM via fluent gridformat. Geometrien ... -
3D visualization of autonomous underwater robots
(Master thesis, 2014)This thesis has an objective aimed to develop a functional real-time visualization of an underwater robot manipulator, and present the relevant theory and steps related to this system. Then the system should be prepared ... -
3D-effects in Slope Stability Analysis - Sensitivity of Geometry in 2D and 3D Stability Programs
(Master thesis, 2020)Denne masteroppgaven har bestått av et litteraturstudie sammen med numeriske 2D- og 3D-analyser. Numeriske simuleringer er gjennomført med programmer basert på grenselikevekt og elementmetoden. Tidligere litteratur ble ... -
3D-effekter i analyser av seksjonsvis utgraving
(Master thesis, 2022)Skråningsstabilitet blir hovedsakelig betraktet som et 2D-problem selv om alle utglidinger er tredimensjonale i naturen. Korrekte 2D-analyser forutsetter plan tøyningstilstand. Det er utviklet flere kraftfulle beregningsprogrammer ... -
3D-effekter på stabilitet av skråninger utsatt for lokale laster
(Master thesis, 2020)Metodene for å regne ut stabiliteten til en skråning utarter seg tradisjonelt ved en 2Dbetraktning. Dette har dog sine begrensninger. Essensiell informasjon kan forsvinne, da last, skrånningsgeometri, grunnforhold og andre ... -
3D-geologisk modellering og inndriftsestimering av utvalgte deler av Krokskogtunnelen
(Master thesis, 2020)På veien mot en papirløs arbeidsplass spiller BIM-modellering en sentral rolle. En 3D-geologisk modell over antatt bergmassefordeling mot dypet er et av elementene som er vanlig å inkludere i en BIM-modell. I denne ... -
3D-modellering av grunnvannstrømning og varmetransport i akviferen i Melhus sentrum - En kvartær- og hydrogeologisk tolkning, med vurdering av uttakskapasitet
(Master thesis, 2018)«3D-modellering av grunnvannstrømning og varmetransport i akviferen i Melhus sentrum» er en masteroppgave skrevet av Martina S. Hellestveit. Oppgaven er utført i forbindelse med faget GEOL3090 Masteroppgave i geologi, ... -
3D-modellering av hydrogeologiske forhold i Hausmannskvartalet, Oslo kommune
(Master thesis, 2014)Masteroppgaven (60 studiepoeng) med tittelen 3D-modellering av hydrogeologiske forhold i Hausmannskvartalet, Oslo kommune er skrevet av Anniken Mjøen Solli ved Institutt for Geologi og Bergteknikk, NTNU. Mastergradsarbeidet ...