Blar i Fakultet for ingeniørvitenskap (IV) på tittel
Viser treff 4433-4452 av 22998
-
Creating your Own Tools: Prototyping Environments for Prototype Testing
(Journal article; Peer reviewed, 2019)Evaluating prototypes through prototype experiments is an essential part of most early stage, exploratory, product development processes. The rate at which prototypes are tested is often high and even incremental improvements ... -
Creation of a GIS based Case Study Collection for Marine Accidents and Exercises in the Arctic
(Master thesis, 2023)Arctic sea ice has been experiencing a steady decline in its minimum extent, primarily occurring in September each year, with a current rate of shrinkage at 12% per decade. This diminishing sea ice has facilitated increased ... -
Creep and Consolidation in Pierre Shale - Identification of how time-dependent effects are influenced by alteration in pore fluid pH and changes in stress conditions
(Master thesis, 2016)The Petroleum Safety Authority of Norway (PSA) has now acknowledged the use of shale as an annular barrier for permanent plug and abandonment (PP&A) operations in the oil industry. Shale can exhibit a natural self-sealing ... -
Creep and high temperature fatigue performance of as buildselective laser melted Ti-based 6Al-4V titanium alloy
(Peer reviewed; Journal article, 2020)The present work focuses on the room and high temperature low-cycle fatigue and creep testing of Ti-6Al-4V manufactured by selective laser melting (SLM) or laser-based powder bed fusion process (LBPF). The fatigue specimens ... -
Creep behavior of v-notched components
(Journal article; Peer reviewed, 2017)Geometrical discontinues such as notches play a significant rule in structural integrity of the components, especially when the component is subjected to very severe conditions, such as the high temperature fatigue or ... -
Creep in soft Soils
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:77, Doctoral thesis, 2004)As more and more constructions are concentrated in densely populated urban areas, there is an increasing need to construct buildings and geotechnical structures on soft clay materials, which usually produce significant ... -
Creep of geomaterials – some finding from the EU project CREEP
(Journal article; Peer reviewed, 2017)This paper gives a summary of some of the main findings of the EU founded project “Creep of geomaterials”, CREEP. CREEP was an Industry-Academia Partnerships and Pathways (IAPP) project funded from the 7th Framework Programme ... -
Crevice corrosion of solution annealed 25Cr duplex stainless steels: Effect of W on critical temperatures
(Peer reviewed; Journal article, 2021)In this work, the influence of tungsten on the crevice corrosion resistance of three super duplex stainless steels (SDSS) containing 0.0, 0.6, and 2.1 wt.% W was determined. The PD-GS-PD technique was used to estimate the ... -
The Criterion of the Cassie–Baxter and Wenzel Wetting Modes and the Effect of Elastic Substrates on It
(Peer reviewed; Journal article, 2023)Controlling the wettability using microstructures has been studied because of many applications. In particular, bio-mimetic microstructures modeled after the self-cleaning properties of the lotus leaf have been extensively ... -
Critical assessment of hydrodynamic load models for a monopile structure in finite water depth
(Peer reviewed; Journal article, 2020)The response from steep and breaking waves for a monopile structure is investigated by analysis of experimental results and by application of numerical models for six irregular sea states. The experimental monopile was ... -
Critical assessment of non-linear hydrodynamic load models for a fully flexible monopile offshore wind turbine
(Journal article; Peer reviewed, 2018)This paper presents a comparison between experimental data of a model-scale 4 MW monopile offshore wind turbine subjected to extreme irregular sea states in finite water and the numerical models suggested in offshore wind ... -
Critical Assessment of Non-linear Wave Loads in the Design of Offshore Wind Turbines
(Master thesis, 2014)Good wind conditions make Dogger Bank a well suited site for offshore wind industry. The harsh environment combined with shallow water, create significant non-linear wave loads which must be accounted for in the ultimate ... -
Critical Assessment of Non-linear Wave Loads in the Design of Offshore Wind Turbines
(Master thesis, 2014)Good wind conditions make Dogger Bank a well suited site for offshore wind industry. The harsh environment combined with shallow water, create significant non-linear wave loads which must be accounted for in the ultimate ... -
Critical Concerns of Deploying Blockchain in Internet of Things Applications
(Journal article; Peer reviewed, 2024)The Internet of Things (IoT) and blockchain are both recognized as cutting-edge, popular technologies. In contrast to IoT, which pertains to the spread of linked equipment via supplying information over the Internet, ... -
Critical design – a new paradigm for teaching and learning universal design
(Chapter, 2017)The critical design method, which was originally developed as a tool for designers, architects, engineers, etc. to open the (design) brief when designing “extreme environments” of the future [1a] – in so doing throwing ... -
A critical discussion of different methods and models in Casimir effect
(Journal article; Peer reviewed, 2022) -
The Critical Distance Method to estimate the fatigue strength of notched additively manufactured titanium
(Peer reviewed; Journal article, 2020)The present investigation deals with the problem of performing the fatigue assessment of notched components made of 3D-printed titanium alloy Ti6Al4V when it is used in the as-manufactured condition. The notch fatigue ... -
Critical evaluation of the B-WaterSmart framework - using the case study of Bodø
(Master thesis, 2022)Verdens befolkning har vokst kraftig de siste hundre årene, og veksten er størst i og rundt byene. Dette krever en ny måte å planlegge byene på. Når byene vokser øker også forbruket, samtidig som tilgangen på viktige ... -
A critical evaluation of topology optimization results for strut‐and‐tie modeling of reinforced concrete
(Peer reviewed; Journal article, 2020)Defining a suitable truss model is one of the most important steps of applying the strut‐and‐tie modeling (STM) method to design D‐regions in reinforced concrete (RC) structures. The truss model is a discrete representation ...