Blar i NTNU Open på tittel
Viser treff 33698-33717 av 100666
-
Fabrication and Characterization of Ferroelectric Nanomesas: A Scanning Probe Approach
(Doktoravhandlinger ved NTNU, 1503-8181; 2010:4, Doctoral thesis, 2010)The present study focuses on experimental investigations of size effects in ferroelectric perovskite nanostructures. When the size of a ferroelectric material is reduced down to the nanoscale, its physical properties are ... -
Fabrication and Characterization of GaAs/AlGaAs Core-Shell Photonic Nanowires
(Master thesis, 2009)GaAs/AlGaAs core-shell nanowires (NWs) were grown on GaAs(111)B substrates by Au-assisted molecular beam epitaxy (MBE) to investigate how different Al compositions in the shell influences the structural and optical properties ... -
Fabrication and characterization of optical waveguide components in epitaxial (Pb,La)(Zr,Ti)O3 thin films.
(Master thesis, 2009)This report presents a method for fabrication of ridge-type waveguide electro-optic modulators in 500 nm thick, c-oriented, epitaxial, (Pb0.92,La0.08)(Zr0.4,Ti0.6)O3 thin films on a MgO substrate. The method is based on ... -
Fabrication and Characterization of Polymeric Membranes for Dehydration of Triethylene Glycol Used for Subsea Application
(Master thesis, 2019)Hensikten med dette prosjektet er undersøke om en polybenzimidazole (PBI) membran kan brukes til å dehydrere trietylen glykol (TEG) i en pervaporasjons prosess som en del av en membran prosess for dehydrering av naturgass. ... -
Fabrication and Characterization of Single Doped GaAs Nanowire Devices
(Master thesis, 2011)In the work with this master thesis, electron beam lithography (EBL) and other cleanroom methods was used to develop a reproducible process for making ohmic contactsto nanowires (NWs), with the aim of investigating different ... -
Fabrication and Characterization of Single GaAs Nanowire Devices
(Master thesis, 2010)In this work, a reproducible fabrication process for contacting single GaAs nanowires (NWs) using electron beam lithography (EBL) has been established. Wurtzite (WZ) GaAs core NWs doped with Te and Be have then been ... -
Fabrication and characterization of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers
(Master thesis, 2015)The effect of drugs could be greatly improved by encapsulating drugs into nanoparticles. Nanoparticles can facilitate delivery of a variety of drugs, allow transport to target site and achieve prolonged drug delivery. This ... -
Fabrication and Electronic Investigation of GaAs nanowire/Graphene Hybrid Devices
(Master thesis, 2014)In the present study, a process for fabricating GaAs nanowire/graphene hybrid devices using electron beam lithography processing techniques is presented and demonstrated. Fabricated devices were investigated electronically ... -
Fabrication and Evaluation of Bio-based Nanocomposite TFC Hollow Fiber Membranes for Enhanced CO2 capture
(Journal article; Peer reviewed, 2019)Nanocellulose is a promising and sustainable biobased nanomaterial because of its excellent mechanical properties, biocompatibility, natural abundance, and especially its high aspect ratio. Interest in applying nanocellulose ... -
Fabrication and Measurements of GaAs Nanowire Array Solar Cell Devices
(Master thesis, 2013)Radial junction p-i-n GaAs nanowire array solar cell (NWASC) devices have been fabricated and optoelectrically measured. Substrates for nanowire (NW) growth were fabricated by electron beam lithography or nanoimprint ... -
Fabrication by electron beam lithography and preliminary studies by high resolution electron microscopy techniques of perovskite nanostructures
(Master thesis, 2007)In order to study thin films of complex oxides deposited on discontinuous surfaces, necessary techniques to fabricate templates and analysis of templates and thin-film samples at atomic scale have been investigated. ... -
Fabrication of a Novel Al/Mg Composite:: Processing and Characterization of Pure Aluminium, Al/AZ31 Alloy Bi-Metal and Aluminium based Sheet Composites by Severe Plastic Deformation
(Doktoravhandlinger ved NTNU, 1503-8181; 2013:318, Doctoral thesis, 2013) -
Fabrication of a Photonic Crystal using self-assembly: A potentially new rear reflector for thin solar cells
(Master thesis, 2009)The major issue with solar cells today, is the price per watt. To tackle this challenge several approaches are being made. One possible approach is to reduce the amount of silicon raw material used in todays wafer-based ... -
Fabrication of a scaled MgB2 racetrack demonstrator pole for a 10 MW direct drive wind turbine generator
(Journal article; Peer reviewed, 2018)Field windings made of MgB2 wires or tapes are considered for their potential to reduce volume, weight and cost of large offshore wind turbine generators. To gain experience of how to use this relatively new material in ... -
Fabrication of a Silicon Photonic Crystal Biosensor
(Master thesis, 2014)The research performed in the scope of the master project and described in this thesis is devoted to the study of a two dimensional photonic crystal biosensor in silicon. The band gap of hexagonal photonic crystal slab ... -
Fabrication of biodegradable hollow microsphere composites made of polybutylene adipate co-terephthalate/polyvinylpyrrolidone for drug delivery and sustained release
(Peer reviewed; Journal article, 2023)Sustained drug release has attracted increasing interest in targeted drug therapy. However, existing methods of drug therapy suffer drug action time, large fluctuations in the effective concentration of the drug, and the ... -
Fabrication of Cellular Microarrays
(Master thesis, 2017)Cellular microarrays are known for their use as a tool to investigate variations between single cells in terms of how they respond to different physiological parameters. The work of this thesis focused on developing a ... -
Fabrication of Co3O4 from cobalt/2,6-napthalenedicarboxylic supercapacitor application
(Peer reviewed; Journal article, 2021)In this study, cobalt-based metal-organic framework (MOF) powder was prepared via the solvothermal method using 2,6-naphthalenedicarboxylic acid (NDC) as the organic linker and N,N-dimethylformamide (DMF) as the solvent. ... -
Fabrication of conductive graphene thin films for opto-electronic use
(Master thesis, 2020)En metode for å lage tynnfilmer av grafen deponert på konduktive og ikke-konduktive glass substrater blir presentert her. En omfattende studie av flere deponeringsmetoder som Spin Coating, Doctor Blading, Elektrodeponering, ... -
Fabrication of Defect-Free Cellulose Acetate Hollow Fibers by Optimization of Spinning Parameters
(Journal article; Peer reviewed, 2017)Spinning of cellulose acetate (CA) with the additive polyvinylpyrrolidone (PVP) in N-methyl-2-pyrrolidone (NMP) solvent under different conditions was investigated. The spinning parameters of air gap, bore fluid composition, ...