• Numerical Methods for the Benjamin-Ono Equation 

      Fiksdal, Geir Midgard (Master thesis, 2013)
      In this thesis, we compare four numerical methods for solving the Benjamin-Ono equation. The numerical methods are presented in detail, and we compare them for different test problems. We derive the Hirota bilinear form ...
    • Numerical Methods for Two-Phase Flow with Contact Lines 

      Walker, Claudio (Doktoravhandlinger ved NTNU, 1503-8181; 2012:164, Doctoral thesis, 2012)
      This thesis focuses on numerical methods for two-phase ows, and especially ows with a moving contact line. Moving contact lines occur where the interface between two uids is in contact with a solid wall. At the location ...
    • Numerical Methods for Valuation and Optimal Operation of Natural Gas Storage 

      Følstad, Erik Magnus G. (Master thesis, 2015)
      The thesis describes different approaches for solving numerically a PDE model for the valuation and optimal operation of a natural gas storage facility, characterized as a Hamilton Jacobi Bellman (HJB) equation. The HJB ...
    • Numerical model for dynamic installation of large diameter monopiles 

      Kaynia, Amir M.; Hebig, Jan; Pein, Taisiya; Shin, Yunsup (Peer reviewed; Journal article, 2022)
      This paper presents the numerical code VibPile for simulation of the nonlinear dynamic response of large monopiles under harmonic loading and installation by vibration or impact driving. VibPile is based on a nonlinear FE ...
    • A numerical model for the simulation of oil-ice interaction 

      Abbasi, Hosseinreza; Lubbad, Raed (Peer reviewed; Journal article, 2021)
      Accurate modeling of the interaction between oil and sea ice is essential for predicting oil spill fate and transport in ice-infested waters. A three-dimensional numerical model based on the smoothed particle hydrodynamics ...
    • Numerical model of moment resisting connection using threaded rods and steel coupling parts in tall timber building 

      Skiri, Espen Samuelsen (Master thesis, 2023)
      WoodSol er et forskningsprosjekt av Sintef og NTNU, hvor målet er å utvikle nye og miljøvennlige løsninger for høye bygninger utført av trekonstruksjoner. Et av delprosjektene er å utvikle rammekonstruksjoner av tre med ...
    • Numerical Modeling and Analysis of a Semi-submersible Fish-cage 

      Dou, Rui (Master thesis, 2018)
      The concept of rigid fish-farm was raised to overcome the space limitation of traditional fish-farm. To ensure that the structure has the ability to withstand the harsh sea environment, this report investigates a rigid ...
    • Numerical Modeling and Analysis of the Combined Wind and Wave Energy Concept SFC 

      Rahman, Md. Rafiur (Master thesis, 2016)
      This thesis work primarily aims to achieve a good understanding of the basic principle of the frequency domain and time domain analysis methods for response analysis of combined wind and wave energy concept SFC. SFC is a ...
    • Numerical Modeling and Dynamic Analysis of a Floating Bridge Subjected to Wind, Wave, and Current Loads 

      Cheng, Zhengshun; Gao, Zhen; Moan, Torgeir (Journal article; Peer reviewed, 2018)
      Designing reliable and cost-effective floating bridges for wide and deep fjords is very challenging. The floating bridge is subjected to various environmental loads, such as wind, wave, and current loads. All these loads ...
    • Numerical Modeling and History Matching of Super-Wet Combustion Tube Test 

      Alipour, Samaneh (Master thesis, 2014)
      A number of laboratory experiments are defined and implemented to reveal the in situ combustion behavior on core samples drilled from heavy oil reservoirs under specifically designed conditions. The accelerating rate ...
    • Numerical modeling and parametric study of an innovative solar oven 

      Zafar, Hafiz Abdullah; Badar, Abdul Waheed; Butt, Fahad Sarfraz; Khan, Muhammad Yasin; Siddiqui, Muhammad Salman (Journal article; Peer reviewed, 2019)
      A unique design of a double glazed box-type solar oven with flat foldable external reflectors at the top and front and an internal reflector beneath the L-shaped absorber plate is numerically and parametrically studied. ...
    • Numerical Modeling and Simulation of the Single Blade Installation for a Spar Wind Turbine Inside a Floating Dock 

      Haugli, Harald Osland (Master thesis, 2022)
      Ønsket om å redusere CO2-utslipp og avhengighet av fossil energi har vakt betydelig interesse i markedet for vindkraft til havs. Den økende størrelsen på vindturbinene og vindparkene har presset utbyggingen inn i nye farvann ...
    • Numerical Modeling Framework for Wind Turbine Analysis & Atmospheric Boundary Layer Interaction 

      Siddiqui, Muhammad Salman; Rasheed, Adil; Tabib, Mandar; Kvamsdal, Trond (Chapter, 2017)
      Prevailing atmospheric conditions can have a significant impact on the performance of large mega-watt wind turbines. A purely experimental evaluation of this impact is currently not possible and hence numerical techniques ...
    • Numerical modeling of breaking wave induced seawall scour 

      Ahmad, Nadeem (Journal article; Peer reviewed, 2019)
      cour is recognised as one of the major causes of seawall failure. This paper presents numerical modelling of seawall scour due to wave impact on a vertical seawall. The modelling of waves hydrodynamics is based on the ...
    • Numerical Modeling of Combined Hydraulics and Infiltration in Grassed Swales 

      Grinden, Arve (Master thesis, 2014)
      The aim of this thesis is to establish a numerical model capable of simulating combined infiltration and hydraulic discharge through grassed swales. The model is intended for making assessments of the hydraulics within ...
    • Numerical Modeling of Cyclic Loading on Clay 

      Klevsjø, Christofer (Master thesis, 2014)
      Soil`s behavior, when subjected to cyclic loading, may often be reduced stiffness giving large deformations. For undrained conditions a possible pore pressure build-up will reduce the capacity even further. This may affect ...
    • Numerical modeling of direct shear tests of rock joints 

      Aas, Henrik (Master thesis, 2023)
      Numerisk modellering spiller en stadig større rolle i felt innenfor ingeniørgeologi. For modelleringens bruk i forskning knyttet til konkrete aspekter for bergmekanikk, er sprekkdeformasjon når utsatt for normal- og ...
    • Numerical modeling of diseased mitral valves 

      Aguilera, Hans Martin Dahl (Doctoral theses at NTNU;2023:273, Doctoral thesis, 2023)
      In this thesis, we have developed methods to create digital replicas of patients’ mitral valves from echocardiographic images and perform structural simulations in a finite element framework. The methods allow us to study ...
    • Numerical Modeling of Effective Thermal Conductivity of Hollow Silica Nanosphere Packings 

      Liu, He; Tian, You; Alex Mofid, Sohrab; Li, Shanshan; Zhou, Junjie; Hu, Mengyao; Jelle, Bjørn Petter; Gao, Tao; Wu, Xuehong; Li, Zengyao (Peer reviewed; Journal article, 2021)
      Hollow silica nanosphere packings (HSNSPs) can significantly suppress heat conduction through solid and gas phases due to the voids, small interparticle contact areas, and nanosized pores, showing promising potentials ...
    • Numerical Modeling of Flow Over Trapezoidal Broad-Crested Weir 

      Haun, Stefan; Olsen, Nils Reidar Bøe; Feurich, Robert (Journal article; Peer reviewed, 2011)
      Two computational fluid dynamics (CFD) codes, Flow-3D and SSIIM 2, have been used to calculate the water flow over a trapezoidal broad-crested weir. The two programs apply different algorithms for making the grid and ...