Vis enkel innførsel

dc.contributor.authorLiu, Siqi
dc.contributor.authorLin, Meichao
dc.contributor.authorWang, Xu
dc.contributor.authorFu, Yuequn
dc.contributor.authorRen, Xiaobo
dc.contributor.authorZhang, Zhiliang
dc.contributor.authorHe, Jianying
dc.date.accessioned2022-02-08T10:06:37Z
dc.date.available2022-02-08T10:06:37Z
dc.date.created2022-01-06T11:50:56Z
dc.date.issued2022
dc.identifier.citationMaterials Science & Engineering: A. 2022, 832 .en_US
dc.identifier.issn0921-5093
dc.identifier.urihttps://hdl.handle.net/11250/2977660
dc.description.abstractThe additive manufacturing (AM) process often results in non-uniform microstructure and different mechanical properties in sequential layers, impacting the overall performance of the AM-ed component. However, it is extremely challenging to evaluate the local stress-strain behavior of each individual layer, owing to the limited size of the AM-ed layered structure. To this end, a framework for characterizing and predicting the mechanical evolution of AM-ed multiphase alloys by combing nanoindentation and microstructure-based finite element method (FEM) was proposed. The sample used in this study was superduplex stainless steel (SDSS) manufactured by wire arc additive manufacturing (WAAM), and the microstructure varied from layer to layer. Firstly, the mechanical properties of the two constituent phases in each layer, including elastic modulus and hardness, were obtained by nanoindentation, and the indentation size effect (ISE) was also evaluated. The yield strength and hardening exponent of each phase were subsequently estimated by reverse analysis method, and therefore the constitutive behaviors of the individual phase, which served as input parameters for FEM, were acquired. By aid of real microstructure-based FEM under uniaxial tension, the overall stress-strain behaviors of each layer and the distributions of the stress and strain during the deformation process were investigated. This work provides a new avenue for the characterization of the multiphase alloys in AM industry, beneficial to the understanding of the mechanical evolution in AM-ed materials.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleA framework for predicting the local stress-strain behaviors of additively manufactured multiphase alloys in the sequential layersen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.source.pagenumber10en_US
dc.source.volume832en_US
dc.source.journalMaterials Science & Engineering: Aen_US
dc.identifier.doi10.1016/j.msea.2021.142367
dc.identifier.cristin1975805
dc.relation.projectNorges forskningsråd: 251068en_US
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode2


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal