Show simple item record

dc.contributor.advisorHolden, Christian
dc.contributor.advisorEgeland, Olav
dc.contributor.advisorSten, Ronny
dc.contributor.authorViswanathan, Savin
dc.date.accessioned2021-05-05T07:00:19Z
dc.date.available2021-05-05T07:00:19Z
dc.date.issued2021
dc.identifier.isbn978-82-326-6218-0
dc.identifier.issn2703-8084
dc.identifier.urihttps://hdl.handle.net/11250/2753585
dc.description.abstractThe advancements in computing has made it possible to carry out integrated simulation of complex multiphysical systems, to better evaluate system performance and safety. The discipline of multiphysical simulation, though well established in many domains, is not used as extensively in the analysis of ocean engineering systems, which even in their simplest applications, is highly multiphysical and interdisciplinary. One factor that limits the of use of multiphysical simulation techniques in the analysis of offshore systems is the lack of mutiphysics capabilities in hydrodynamics simulation software, and vice versa. This thesis presents the efforts and results in the direction of implementing such a multiphysical approach in the ocean engineering domain, and thereby encompasses facets such as the development of Modelica component models to constitute an Ocean Engineering Library for OpenModelica, a popular open-source multiphysics software; and the formulation of a co-simulation interface between Simulation X, a commonly used commercial multiphysics software, and OrcaFlex, a popular commercial ocean engineering software. Being an article-based thesis, the project scope is divided into parts, and each part is dealt with in an article along with the relevant theory. In the first article, preliminary results from the multiphysical simulation of a representative ocean engineering system in OpenModelica is compared with those obtained using OrcaFlex, as an indicator of the possibilities of implementing such a multiphysical approach. A detailed description of the theory behind the development of component models to simulate regular and irregular waves, and depth-varying current is presented in the second article, while the response of non-diffracting floating objects, and mooring response based on the quasi-static approach, is presented in the third article. The third article also brings out the limitations of the quasi-static approach in the simulation of mooring forces. The fourth article describes the lumped-mass approach to simulation of mooring line dynamics, while the fifth article deals with the development of Modelica component-models for subsea cable dynamics based on the lumped-mass approach. The sixth article lays the foundation for the future development of Modelica component-models for simulating the hydrodynamics of larger objects, where wave diffraction and radiation effects are significant, by presenting a Python code for the evaluation of the frequency dependent hydrodynamic coefficients. The seventh article is concerned with the development of a co-simulation methodology for riser analysis and presents a co-simulation interface between SimulationX and OrcaFlex. The last and eighth article compares the results of a multiphysical simulation, based on the above co-simulation methodology, of a planned riser disconnect procedure with field measurements, and demonstrates the possibilities that open up. The conclusion section sums up the contributions of the present work and suggests avenues for future research in the domain.en_US
dc.language.isoengen_US
dc.publisherNTNUen_US
dc.relation.ispartofseriesDoctoral theses at NTNU;2021:162
dc.relation.haspartViswanathan, Savin; Holden, Christian. Towards the Development of an Ocean Engineering Library for OpenModelica. I: ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. Volume 7B: Ocean Engineering. The American Society of Mechanical Engineers (ASME) https://doi.org/10.1115/OMAE2019-95054en_US
dc.relation.haspartViswanathan, Savin; Holden, Christian. Modelica Component Models for Non-diffracting Floating Objects and Quasi-static Catenary Moorings. I: Proceedings of the American Modelica Conference 2020. Linköping University Electronic Press 2020 ISBN 978-91-7929-900-2. s. 101-110 https://doi.org/10.3384/ecp20169101en_US
dc.relation.haspartViswanathan, Savin; Holden, Christian. Modelica Component Models for Oceanic Surface Waves and Depth Varying Current. I: Proceedings of the American Modelica Conference 2020. Linköping University Electronic Press 2020 ISBN 978-91-7929-900-2. s. 91-100 https://doi.org/10.3384/ecp2016991en_US
dc.relation.haspartViswanathan, Savin; Holden, Christian. Dynamic Simulation of a Mooring Catenary Based on the Lumped-Mass Approach: OpenModelica and Python Implementations. I: ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering - Volume 6B: Ocean Engineering. The American Society of Mechanical Engineers (ASME) https://doi.org/10.1115/OMAE2020-18134en_US
dc.relation.haspartViswanathan, Savin; Holden, Christian. Simulating the Dynamics of a Suspended Sub-sea Load Using Modified Components from the Modelica MultiBody Library. I: Proceedings of Asian Modelica Conference 2020. Linköping University Electronic Press 2020 ISBN 978-91-7929-775-6. s. 59-65 2020. https://doi.org/10.3384/ecp202017459en_US
dc.relation.haspartS. Viswanathan, C. Holden, O. Egeland, M. Greco. An open-source Python-based boundary-element method code for the three-dimensional zero-Froude, infinite-depth, waterwave diffraction-radiation problem. Journal of Modeling, Identification and Control.en_US
dc.relation.haspartS. Viswanathan, C. Holden, O. Egeland, R. Sten. Co-simulation of the hydro-pneumatic riser-tensioner system I – Methodology synthesis. Journal of Offshore Mechanics and Arctic Engineeringen_US
dc.relation.haspartS. Viswanathan, C. Holden, O. Egeland, R. Sten. Co-simulation of the hydro-pneumatic riser-tensioner system II – Field verification and advanced simulations. Journal of Offshore Mechanics and Arctic Engineeringen_US
dc.titleMultiphysical Simulation of Ocean Engineering Systems — Modelica Ocean Engineering Library — Cosimulation for Drilling Riser Analysisen_US
dc.typeDoctoral thesisen_US
dc.subject.nsiVDP::Technology: 500::Mechanical engineering: 570en_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record