dc.contributor.author | Farhadian, Mousa | |
dc.contributor.author | Raeissi, Keyvan | |
dc.contributor.author | Golozar, Mohammad Ali | |
dc.contributor.author | Labbaf, Sheyda | |
dc.contributor.author | Hajilou, Tarlan | |
dc.contributor.author | Barnoush, Afrooz | |
dc.date.accessioned | 2021-04-06T09:31:18Z | |
dc.date.available | 2021-04-06T09:31:18Z | |
dc.date.created | 2020-01-07T13:37:43Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | Surface & Coatings Technology. 2019, 380 1-13. | en_US |
dc.identifier.issn | 0257-8972 | |
dc.identifier.uri | https://hdl.handle.net/11250/2736321 | |
dc.description.abstract | ZrO2-10 mol.% SiO2 composite coatings has been produced on 316L stainless steel, surface treated using mechanical polishing, electropolishing and anodic oxidizing procedures. For this purpose, the composite particles were prepared using sol-gel processing method, electrophoretically deposited on pre-treated substrate and then sintered at 1100 °C. The evaluations confirmed firm attachment of the coating deposited on the oxidized 316L surface, providing a dual-structure interface including dense and porous layer. Focused ion beam tomography technique was applied to study the interface. In this regard, the interface structure was reconstructed and a model was proposed based on acquired three dimensional images to describe the interlayer formation mechanism on the anodic oxidized substrate. Corrosion studies in a simulated body fluid solution indicated that the highest barrier effect was obtained on anodically oxidized surface post coating. This sample revealed the lowest corrosion current density of 0.95 nA cm−2 after 24 h immersion. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier | en_US |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/deed.no | * |
dc.title | Electrophoretic deposition and corrosion performance of Zirconia-Silica composite coating applied on surface treated 316L stainless steel: Toward improvement of interface structure | en_US |
dc.type | Peer reviewed | en_US |
dc.type | Journal article | en_US |
dc.description.version | acceptedVersion | en_US |
dc.source.pagenumber | 1-13 | en_US |
dc.source.volume | 380 | en_US |
dc.source.journal | Surface & Coatings Technology | en_US |
dc.identifier.doi | 10.1016/j.surfcoat.2019.125015 | |
dc.identifier.cristin | 1767729 | |
dc.relation.project | Norges forskningsråd: 245963 | en_US |
dc.relation.project | Norges forskningsråd: 244068 | en_US |
dc.description.localcode | "© 2019. This is the authors’ accepted and refereed manuscript to the article. Locked until 17.10.2021 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ " | en_US |
cristin.ispublished | true | |
cristin.fulltext | preprint | |
cristin.fulltext | postprint | |
cristin.qualitycode | 1 | |