Numerical Study on the Dynamic Response of a Submerged Floating Tunnel Under Current Loads Based on the Segment Model Towing Test Results
MetadataVis full innførsel
Submerged floating tunnels (SFTs) are considered as one of the relevant concepts to replace ferry connection in the Norwegian Public Road Administration's plan to upgrade the E39 coastal highway. Current load including lift and drag force is one the most important factors challenging its safety reliability and fatigue lifetime. In this study, the lift force and drag force on a tunnel section model was studied through a stationary towing test of a twin-rigid-cylinder in tandem arrangement with various spacing ratios. The torsional moment induced by the difference of lift force on the two cylinders was also analyzed. A dynamic analysis of the SFT (with a fixed spacing ratio of 3) considering the current induced lift, drag forces and torsional moment was then conducted in SIMO/RIFLEX. The numerical simulations reveal that the lift force contributes significantly to the heave motion and the vertical bending moment My of the SFT. The drag forces on the twin cylinders, which act in opposite directions, strongly affect the sway motion and horizontal bending moment Mz compared with the results based on the drag forces acting in the same direction. The case studies provide a basic understanding of the dynamic behavior of an SFT under current load.