Show simple item record

dc.contributor.authorGranum, Henrik
dc.contributor.authorMorin, David
dc.contributor.authorBørvik, Tore
dc.contributor.authorHopperstad, Odd Sture
dc.identifier.citationInternational Journal of Mechanical Sciences. 2021, 192,en_US
dc.description.abstractThis paper presents a novel calibration procedure of the modified Mohr-Coulomb (MMC) fracture model by use of localization analyses and applies it for three tempers of an AA6016 aluminium alloy. The localization analyses employ the imperfection band approach, where metal plasticity is assigned outside the band and porous plasticity is assigned inside the band. Ductile failure is thus assumed to occur when the deformation localizes into a narrow band. The metal plasticity model is calibrated from notch tension tests using inverse finite element modelling. The porous plasticity model is calibrated by use of localization analyses where the deformation histories from finite element simulations of notch and plane-strain tension tests are prescribed as boundary conditions. Subsequently, localization analyses are used to establish the failure locus in stress space for proportional loading conditions and thus to determine the parameters of the MMC fracture model. Finite element simulations of notch tension and in-plane simple shear tests as well as two load cases of the modified Arcan test are used to validate the calibrated fracture model. The predictions by the simulations are in good agreement with the experiments, even though some deviations are seen for each temper. The results demonstrate that localization analyses are a cost-effective and reliable tool for predicting ductile failure, reducing the number of mechanical tests required to calibrate the MMC fracture model compared to the hybrid experimental-numerical approach usually applied.en_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.titleCalibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloyen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.source.journalInternational Journal of Mechanical Sciencesen_US
dc.description.localcodeThis is an open access article distributed under the terms of the Creative Commons CC-BY license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.en_US

Files in this item


This item appears in the following Collection(s)

Show simple item record

Navngivelse 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Navngivelse 4.0 Internasjonal