Fatigue assessment of as‐built and heat‐treated Inconel 718 specimens produced by additive manufacturing including notch effects
Journal article, Peer reviewed
Published version
Åpne
Permanent lenke
https://hdl.handle.net/11250/2675357Utgivelsesdato
2020Metadata
Vis full innførselSamlinger
Originalversjon
10.1111/ffe.13300Sammendrag
The fatigue behaviour of notched and unnotched specimens produced by additively manufactured Inconel 718 were analysed in the as‐built and heat‐treated conditions. The surfaces display high roughness and defects acting as fatigue initiation sites. In the as‐built condition, fine subgrains were found, while in in the heat‐treated state, the subgrains were removed and the dislocation density recovered. SN‐curves are predicted based on tensile properties, hardness and defects obtained by fractography, using the urn:x-wiley:ffe:media:ffe13300:ffe13300-math-0001‐method.