Vis enkel innførsel

dc.contributor.advisorSaue, Sigurd
dc.contributor.advisorEngum, Trond
dc.contributor.authorSchjelderup, Halvor
dc.date.accessioned2020-02-12T15:00:39Z
dc.date.available2020-02-12T15:00:39Z
dc.date.issued2019
dc.identifier.urihttp://hdl.handle.net/11250/2641402
dc.description.abstractDette masterprosjektet har hatt som mål å lage en gitarforsterker som kan brukes i sanntid og fjernstyres over internett fra bunnen av. Med utgangspunkt i et rammeverk for C++ kalt Juce og mikrokontrolleren Bela har jeg klart å oppnå et fungerende resultat. Fra brukerens perspektiv er alt som trengs for å spille gjennom denne forsterkeren en datamaskin, et lydkort, monitoreringsmuligheter og internettilgang, i tillegg til en gitar og en jack-kabel. Denne teknologien muliggjør blant annet at musikkutstyrsentusiaster kan dele, oppleve og oppdage nye utstyrsenheter og lydestetiske uttrykk. Videre kan slik teknologi bidra som en helhetlig generell løsning for sanntids analog fjernprosessering med anvendelsesområder i flere konvensjonelle musiseringsarenaer. Rapporten søker å kartlegge de ulike utfordringene man kan støte på i utviklingen av et slikt system, som for eksempel latencyproblematikk, sanntidskrav og fysisk fjernmanipulasjon av parametere på en ekstern enhet. Videre diskuteres fjernstyring i et designteoretisk lys, og hvorvidt det er likhetstrekk mellom forholdene rundt bruk av digitale replikasjoner av analogt utstyr og virtuell tilgang til de faktiske enhetene.
dc.description.abstractThe aim of this thesis has been to build a guitar amplifier which can be remotely controlled and played in real time over the internet from scratch. I set out on this task equipped with the framework Juce for C++ and the micro controller unit Bela. The project has resulted in a working implementation. From the user’s perspective, all that is needed to play through this amplifier remotely is a computer, a sound interface, a monitoring solution, an internet connection and the ability to type in the correct IP Address and port number of the amplifier unit, with the addition of a guitar and a jack cable. This entails the possibility for gear enthusiasts all over the world to share, experience and discover new equipment and possibilities for musical expression. Furthermore, this technology can be seen as a general real time remote processing service with usages within conventional arenas for music making. The following report seeks to address the different challenges one can face in the development process of similar systems, e.g. latency, real time requirements and the remote physical manipulation of parameters on a geographically separated unit. Over the following pages I will discuss remote control from a design theoretical view, if there are similarities between the use of digital emulations of analogue hardware and virtual access to the unit itself.
dc.languagenob
dc.publisherNTNU
dc.titleAmp over IP: Analog fjernprosessering av audio over IP-nettverk
dc.typeMaster thesis


Tilhørende fil(er)

Thumbnail
Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel