dc.contributor.author | Zhu, Jianxun | |
dc.contributor.author | Holmedal, Lars Erik | |
dc.contributor.author | Myrhaug, Dag | |
dc.date.accessioned | 2020-02-05T09:54:12Z | |
dc.date.available | 2020-02-05T09:54:12Z | |
dc.date.created | 2019-12-03T10:41:36Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | IOP Conference Series: Materials Science and Engineering. 2019, 700 . | nb_NO |
dc.identifier.issn | 1757-8981 | |
dc.identifier.uri | http://hdl.handle.net/11250/2639742 | |
dc.description.abstract | This paper provides numerical investigations of flow in a steady lid-driven cavity of depth to width ratio 1/3 containing a circular cylinder. The inner cylinder is treated using a direct-forcing immersed boundary method, and a project method is applied to solve the incompressible Navier-Stokes equations. Three different Reynolds numbers and positions of the cylinder are considered; for a lower Reynolds number, flow structures are weakly affected by the cylinder near the left wall while two clockwise vortices attached to the cylinder are formed as the cylinder moves rightwards; for a moderate Reynolds number, an anticlockwise bottom vortex is formed for the cylinder near the left wall, and it disappears as the cylinder is shifted rightwards; for the largest Reynolds number, two anti-clockwise vortices attached the cylinder are formed for the cylinder close to the left wall, and as the cylinder moves gradually closer to the left wall a bottom vortex is formed and disappears together with the clockwise vortex to the right side of the cylinder. | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | IOP Publishing | nb_NO |
dc.rights | Navngivelse 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/deed.no | * |
dc.title | Effects of an inserted circular cylinder on a steady lid-driven rectangular cavity flow | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | publishedVersion | nb_NO |
dc.source.pagenumber | 8 | nb_NO |
dc.source.volume | 700 | nb_NO |
dc.source.journal | IOP Conference Series: Materials Science and Engineering | nb_NO |
dc.identifier.doi | 10.1088/1757-899X/700/1/012008 | |
dc.identifier.cristin | 1755890 | |
dc.description.localcode | Content from this work may be used under the terms of theCreative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd | nb_NO |
cristin.unitcode | 194,64,20,0 | |
cristin.unitname | Institutt for marin teknikk | |
cristin.ispublished | true | |
cristin.fulltext | original | |
cristin.qualitycode | 1 | |