dc.contributor.author | Scheid, Claudia Miriam | |
dc.contributor.author | Patrao, Wanderson | |
dc.contributor.author | Silva, Renata | |
dc.contributor.author | Martinsen, Kristoffer Harr | |
dc.contributor.author | Magalhaes, Sergio da Cruz | |
dc.contributor.author | Calcada, Luis Americo | |
dc.date.accessioned | 2019-11-04T11:57:31Z | |
dc.date.available | 2019-11-04T11:57:31Z | |
dc.date.created | 2015-01-20T13:35:47Z | |
dc.date.issued | 2014 | |
dc.identifier.citation | Acta Scientiarum - Technology. 2014, 36 (2), 287-293. | nb_NO |
dc.identifier.issn | 1806-2563 | |
dc.identifier.uri | http://hdl.handle.net/11250/2626368 | |
dc.description.abstract | A mathematical model to predict the dissolution of salt particles suspended in a brine flow is provided. The model consists of a system of three partial differential equations (PDE) based on mass conservation of salt dissolved in the fluid phase, on mass conservation of salt particles in the solid phase and on the overall conservation of energy. A fluid flow experimental unit was built to determine the kinetics of the dissolution of salt particles in a brine flow. Fluid samples free from particled solid material retrieved through the flow line at several predefined points were collected to determine salt dissolution profile. The global convective mass transfer coefficient was evaluated based on the experimental data. Simulations validated the mathematical model and relative deviations between experimental data and simulations were less than 10%. | nb_NO |
dc.language.iso | por | nb_NO |
dc.publisher | Universidade Estadual de Maringa * Editora da Universidade - Eduem | nb_NO |
dc.rights | Navngivelse 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by/4.0/deed.no | * |
dc.title | Avaliação experimental e simulação computacional da dissolução de partículas de cloreto de sódio em salmoura em escoamento | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | publishedVersion | nb_NO |
dc.source.pagenumber | 287-293 | nb_NO |
dc.source.volume | 36 | nb_NO |
dc.source.journal | Acta Scientiarum - Technology | nb_NO |
dc.source.issue | 2 | nb_NO |
dc.identifier.doi | 10.4025/actascitechnol.v36i2.18355 | |
dc.identifier.cristin | 1202510 | |
dc.description.localcode | This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. | nb_NO |
cristin.unitcode | 194,66,35,0 | |
cristin.unitname | Institutt for materialteknologi | |
cristin.ispublished | true | |
cristin.fulltext | original | |
cristin.qualitycode | 1 | |