dc.contributor.author | Sønstabø, Johan Kolstø | |
dc.contributor.author | Morin, David | |
dc.contributor.author | Langseth, Magnus | |
dc.date.accessioned | 2018-10-19T07:19:42Z | |
dc.date.available | 2018-10-19T07:19:42Z | |
dc.date.created | 2018-10-18T14:57:18Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | International Journal of Impact Engineering. 2018, 155 58-75. | nb_NO |
dc.identifier.issn | 0734-743X | |
dc.identifier.uri | http://hdl.handle.net/11250/2568765 | |
dc.description.abstract | A new component test suited for quasi-static and dynamic testing of flow-drill screw connections is presented. The component specimen was made of two different aluminium alloys, and included connections with two material combinations. Large-scale finite element simulations were carried out of each test, in which the connections were modelled with a constraint-based macroscopic model. An improvement of the connection modelling technique is presented. The model was calibrated to cross tension, cross mixed and single lap-joint tests, and validated with peeling and the component tests. | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | Elsevier | nb_NO |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/deed.no | * |
dc.title | Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections | nb_NO |
dc.title.alternative | Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | acceptedVersion | nb_NO |
dc.source.pagenumber | 58-75 | nb_NO |
dc.source.volume | 155 | nb_NO |
dc.source.journal | International Journal of Impact Engineering | nb_NO |
dc.identifier.doi | https://doi.org/10.1016/j.ijimpeng.2018.01.008 | |
dc.identifier.cristin | 1621461 | |
dc.relation.project | Norges forskningsråd: 237885 | nb_NO |
dc.description.localcode | © 2018. This is the authors’ accepted and refereed manuscript to the article. Locked until 12.1.2020 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ | nb_NO |
cristin.unitcode | 194,64,45,0 | |
cristin.unitname | Institutt for konstruksjonsteknikk | |
cristin.ispublished | true | |
cristin.fulltext | postprint | |
cristin.qualitycode | 2 | |