dc.contributor.author | Zhuo, Yizhi | |
dc.contributor.author | Wang, Feng | |
dc.contributor.author | Xiao, Senbo | |
dc.contributor.author | Zhang, Zhiliang | |
dc.contributor.author | He, Jianying | |
dc.date.accessioned | 2018-09-20T06:55:37Z | |
dc.date.available | 2018-09-20T06:55:37Z | |
dc.date.created | 2018-08-24T10:49:09Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | ACS Omega. 2018, 3 (8), 10139-10144. | nb_NO |
dc.identifier.issn | 2470-1343 | |
dc.identifier.uri | http://hdl.handle.net/11250/2563540 | |
dc.description.abstract | Icephobic coating and surfaces are essential for protecting infrastructures such as transmission lines, transportation vehicles, and many others from severe damages of excessive icing. The slippery liquid-infused porous surfaces (SLIPS) are attracting escalating attention due to their low ice adhesion strength. Despite all the encouraging laboratory scale results, the SLIPS are still far from being applicable in real environments owing to the key unsolved problem, namely anti-icing durability. Inspired by the functionality of the amphibians’ skin, lubricant regenerability was introduced to conventional SLIPS and realized by a facile and scalable fabrication route. A series of polydimethylsiloxane (PDMS) based skin-like SLIPS were designed and fabricated by using one-step method, the solvent evaporation-induced phase separation technique. The obtained skin-like SLIPS were able to regenerate surface lubricant constantly by internal residual stress due to phase separation, and survived more than 15 cycles of wiping/regenerating tests. Thanks to the regenerability of the surface lubricant, the new SLIPS demonstrated durable icephobicity, showing a long-term low ice adhesion strength below 70 kPa, which was only 43% of 160 kPa that for the pristine PDMS (Sylgard 184), even after 15 icing/deicing cycles. This work paves a new and facile way for achieving icephobic durability of SLIPS. | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | American Chemical Society | nb_NO |
dc.relation.uri | https://pubs.acs.org/doi/pdf/10.1021/acsomega.8b01148 | |
dc.title | One-Step Fabrication of Bioinspired Lubricant-Regenerable Icephobic Slippery Liquid-Infused Porous Surfaces (SLIPS) | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | publishedVersion | nb_NO |
dc.source.pagenumber | 10139-10144 | nb_NO |
dc.source.volume | 3 | nb_NO |
dc.source.journal | ACS Omega | nb_NO |
dc.source.issue | 8 | nb_NO |
dc.identifier.doi | 10.1021/acsomega.8b01148 | |
dc.identifier.cristin | 1604249 | |
dc.relation.project | Norges forskningsråd: 250990 | nb_NO |
dc.relation.project | Norges forskningsråd: 255507 | nb_NO |
dc.relation.project | Norges forskningsråd: 245963 | nb_NO |
dc.description.localcode | © 2018 American Chemical Society. This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes. | nb_NO |
cristin.unitcode | 194,64,45,0 | |
cristin.unitname | Institutt for konstruksjonsteknikk | |
cristin.ispublished | true | |
cristin.fulltext | original | |
cristin.qualitycode | 1 | |