Long-term Analysis of Gear Loads in Fixed Offshore Wind Turbines Considering Ultimate Operational Loadings

Abstract

The long-term extreme value analysis of gear transmitted load due to the main shaft torque is presented. Two methods, the multibody simulations (MBS) and a simplified method, are demonstrated for the gear transmitted load calculation. The simplified method is verified by the MBS results. The long-term extreme value of the gear transmitted load for wind speeds from the cut-in to the cut-out values is calculated by the simplified method from the long-term distribution of the main shaft torque. Three statistical methods for long-term extreme value analysis of the main shaft torque in the offshore wind turbines are presented. They are then used to predict the extreme value of the gear transmitted load. An alternative approach, the design state or the environmental contour method is proposed and verified by the full long-term results. The methods are exemplified by a 5 MW gearbox case study. The results of this paper are the basis for further work in Ultimate Limit State (ULS) gear design.