Blar i Øvrige samlinger på tittel
Viser treff 14891-14910 av 40063
-
Fractionation of Transition Metals by Solvent Extraction and Precipitation from Tannic Acid-Acetic Acid Leachate as a Product of Lithium-Ion Battery Leaching
(Peer reviewed; Journal article, 2022)Solvent extraction and precipitation schemes are applied to isolate copper, cobalt, manganese and nickel from leachate, produced from spent lithium-ion battery leaching using tannic acid-acetic acid as lixiviant. The metal ... -
Fractographic features of technically pure magnesium, AZ31 and ZK60 alloys subjected to stress corrosion cracking
(Peer reviewed; Journal article, 2020)Using quantitative fractography, the present study clarifies the effect of chemical composition and preliminary plastic deformation on the fracture mode of structural magnesium alloys experienced stress corrosion cracking ... -
Fracture analysis of V‐notched rubbers: An experimental and theoretical study
(Journal article, 2018)In this study, the rupture load in rubbers weakened by sharp V‐notch is investigated under mode I loading. To this end, first, mode I fracture tests are performed on V‐notched samples made of styrene‐butadiene rubbers and ... -
Fracture and fragmentation of blast-loaded laminated glass: An experimental and numerical study
(Journal article; Peer reviewed, 2019)In this study, we use the explicit finite element method in combination with higher order elements and 3D node splitting to simulate fracture and fragmentation of blast-loaded laminated glass. Node splitting is a modelling ... -
Fracture and negative Poisson’s ratio of novel spanned-fullerenes nanotube networks under tension
(Journal article; Peer reviewed, 2013)Carbon-based nanomaterials have attracted significant attention due to their unique physical properties. In this study, various multi-dimensional graphitic architectures are constructed by spanning fullerenes with carbon ... -
Fracture assessment of magnetostrictive materials
(Journal article; Peer reviewed, 2017)Giant magnetostrictive materials are gaining interest in the field of smart material, especially the commercially known Terfenol-D, that is an alloy made out of iron, terbium and dysprosium (Tb0.3Dy0.7Fe1.9). Since these ... -
Fracture assessment of PEEK under static loading by means of the local strain energy density
(Journal article; Peer reviewed, 2017)Polyetheretherketone (PEEK) has gained interest in many industrial applications due to its high strength-to-weight ratio, excellent heat tolerance and high corrosion resistance. Stress concentrators such as notches and ... -
Fracture assessment of polyacrylonitrile nanofiber-reinforced epoxy adhesive
(Journal article, 2018)Electrospun polyacrylonitrile (PAN) nanofibers were incorporated in an epoxy-based adhesive layer to improve the adhesive joint’s mechanical performance. The morphological study of the electrospun PAN nanofibers revealed ... -
Fracture Assessment of Quasi-brittle Rock Simulated by Modified Discrete Element Method
(Journal article; Peer reviewed, 2020)New developments of an in-house hybrid code, named Modified Discrete Element Method (MDEM) are presented in the paper. The new developments are on the treatment of pre-existing and propagating fractures in quasi-brittle ... -
Fracture assessment of U-notched graphite specimens by means of cohesive zone model
(Peer reviewed; Journal article, 2020)Various types of graphite have gained interest in many industrial applications due to their high strength and excellent heat tolerance. However, due to the brittle nature of this material, presence of stress concentrators ... -
Fracture assessment of U-notched PMMA under mixed mode I/II loading conditions by means of local approaches.
(Peer reviewed; Journal article, 2021)The paper investigates the fracture behaviour of U-notched specimens made of polymethylmethacrylate at room temperature under mixed mode loading conditions. The specimens are flat and double notched. The notches bisectors ... -
Fracture assessment of V-notched specimens with end holes made of tungsten-copper functionally graded material under mode I loading
(Journal article; Peer reviewed, 2018)The present research is the first to assess fracture of V-notches with end holes (VO-notches) made of tungsten-copper functionally graded material (W-Cu FGM) under mode I both experimentally and theoretically. W-Cu FGM ... -
Fracture behaviour of notched as-built EBM parts: Characterization and interplay between defects and notch strengthening behaviour
(Journal article, 2018)Additive manufacturing (AM) offers the potential to economically produce customized components with complex geometries. However, the introduction of complex geometry goes hand in hand with the presence of notches. Thus, ... -
Fracture mechanisms in largely strained solids due to surface instabilities
(Journal article; Peer reviewed, 2020)The effect of self-contacting surface defects generated by largely compressing metals on the ductile-to-brittle transition observed in metallic structures is investigated. In order to analyse such an effect, a finite element ... -
Fracture networks in sea ice
(Journal article; Peer reviewed, 2014-04-16)Fracturing and refreezing of sea ice in the Kara sea are investigated using complex network analysis. By going to the dual network, where the fractures are nodes and their intersections links, we gain access to topological ... -
Fracture of micrometre-sized Ni/Au coated polymer particles
(Journal article; Peer reviewed, 2009)Deformation and fracture of individual micrometre-sized Ni/Au coated polymer particles have been studied by a nanoindentation-based flat punch method. A wide range of test conditions has been applied to deform the coated ... -
Fracture resistance dataset of composites under mixed-mode non-proportional loading
(Peer reviewed; Journal article, 2021)Cohesive zone modelling is one of the main tools to simulate fracture of materials and structures. As a result a number of cohesive laws are being developed continuously. In most cases, due to experimental challenges, the ... -
Fracture resistance of 3D nano-architected lattice materials
(Journal article, 2022)Exploiting small scale material effects and structural topology, nano-architected lattices represent a recent novel class of mechanical metamaterials, which exhibit unprecedented combination of mechanical properties. ... -
Fracture toughness and hydrogen embrittlement susceptibility on the interface of clad steel pipes with and without a Ni-interlayer
(Journal article, 2017)The objective of the present work has been to study the fracture properties of the interface between clad and base material of two 316 L austenitic stainless steel - X60/X65 carbon steel hot roll bonded clad pipes; with ... -
The fracture toughness of Mg2Si determined by 3-point bending and the indentation microcracking method
(Peer reviewed; Journal article, 2022)The Mg2Si intermetallic compound was produced from the raw materials by melting in a vacuum furnace. The purity of the as-cast material was 98 vol.%. Continuous polishing of a surface containing microhardness indentation ...