Vis enkel innførsel

dc.contributor.authorPedersen, Ellen Katrinenb_NO
dc.date.accessioned2014-12-19T11:17:33Z
dc.date.available2014-12-19T11:17:33Z
dc.date.created2001-12-11nb_NO
dc.date.issued2001nb_NO
dc.identifier122555nb_NO
dc.identifier.isbn82-471-5352-1nb_NO
dc.identifier.urihttp://hdl.handle.net/11250/228360
dc.description.abstractThe aim of this study was to characterise indoor dust before and after hot surface contact with respect to physical and chemical changes. Changes that may relate to human health were to be given special consideration. The following working goals were set: 1. Establish methods for sampling and pre-treatment of indoor dust 2. Simulate hot surface contact in laboratory experiments 3. Evaluate methods to analyse the residual as well as the emitted volatile organic compounds and particlesnb_NO
dc.languageengnb_NO
dc.publisherFakultet for samfunnsvitenskap og teknologiledelsenb_NO
dc.relation.ispartofseriesDr. ingeniøravhandling, 0809-103X; 2001:87nb_NO
dc.relation.haspartPedersen, Ellen Katrine; Mathiesen, M.; Bjørseth, O.; Syversen, T.. Using thermal desorption and GC-MS for analysing indoor dust from an office building. Proceedings of Indoor Air 99, Edinburgh, International Conf. on Indoor Air Quality and Climate. 4: 159-164, 1999.nb_NO
dc.relation.haspartPedersen, Ellen Katrine; Bjørseth, O.; Syversen, T.; Mathiesen, M.. Emissions from heated indoor dust. Environment International. 27(7): 579-587, 2002.nb_NO
dc.relation.haspartPedersen, Ellen Katrine; Bjørseth, O.; Syversen, T.; Mathiesen, M.. Physical changes of indoor dust caused by hot surface contact. Atmospheric Environment. 35(24): 4149-4157, 2001.nb_NO
dc.relation.haspartPedersen, Ellen Katrine; Bjørseth, O.; Syversen, T.; Mathiesen, M.. A screening assessment of emissions of volatile organic compounds and particles from heated indoor dust samples. Indoor Air ("The definitive version is available at www.blackwell-synergy.com"). 13(2): 106-117, 2003.nb_NO
dc.titleDust in the indoor environment : physical and chemical changes due to hot surface contactnb_NO
dc.typeDoctoral thesisnb_NO
dc.contributor.departmentNorges teknisk-naturvitenskapelige universitet, Fakultet for samfunnsvitenskap og teknologiledelse, Institutt for industriell økonomi og teknologiledelsenb_NO
dc.description.degreedr.ing.nb_NO
dc.description.degreedr.ing.en_GB


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel