Blar i Institutt for materialteknologi på tittel
Viser treff 839-858 av 2499
-
Evaluation of selected ionic liquids as electrolytes for silicon anodes in li-ion batteries
(Peer reviewed; Journal article, 2021)In this work, four selected ionic liquids (ILs), in combination with lithium bis(fluorosulfonyl)imide salt (LiFSI) were explored as electrolytes for anodes made from micron-sized metallurgical grade silicon. The ionic ... -
Evaluation of the Effect of CO2 Cover Gas on the Rate of Oxidation of an AlMgSi Alloy
(Journal article, 2020)Small additions of beryllium (Be) to aluminum magnesium (AlMg) alloys have proven to decrease their oxidation rate during industrial liquid metal handling. As Be can cause respiratory health issues, it is desirable to ... -
Evaluering av armeringskrav i passivt brannvern
(Bachelor thesis, 2019)For passivt brannvern eksisterer det eit krav om at brannvernet skal armerast med netting eller duk. Dette kravet blir beskrive i standarden NORSOK M-501, som er regulerande for overflatebehandling og vernande belegg på ... -
Evaporation and diffusion of Mn in inert systems
(Journal article; Peer reviewed, 2018)This research is aimed to improve our knowledge on the dust formation and clustering in the ferroalloy industry. Specifically, this paper focuses on the evaporation of manganese metal, and how different parameters influence ... -
Evolution in Mechanical Behaviour in a Rolled 3xxx Aluminium Alloy during Lacquering
(Master thesis, 2020)Arbeidet i denne masteroppgaven ble utført for å undersøke en mulig herdene effekt i plater av en 3xxx aluminium legering etter en lakkeringsprosess. Hensikten var å undersøke endringen i mekanisk adferd og hvordan materialet ... -
Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states
(Journal article, 2015)The softening behaviour during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si model alloy was studied as a function of the state of microchemistry, in terms of the solute level of Mn, size and spatial distribution ... -
Evolution in texture and its through-thickness variations in Al-Mg-Si-extrusions: experiments and modelling
(Chapter, 2018)The visual appearance and mechanical properties of aluminium alloy extrusions are strongly dependent on the microstructure and texture of the extruded profiles, where the desired microstructure and texture may depend on ... -
The evolution of precipitates in an Al–Zn–Mg alloy
(Peer reviewed; Journal article, 2023)The precipitation sequence in Al–Zn–Mg alloys has been subject to many revisions over the years as more structural details of the early-stage Guinier-Preston (GP) zones and precipitates have been uncovered. To further ... -
Evolution of SiOx shell layers on SiC-SiOx core-shell nanowires
(Peer reviewed; Journal article, 2020)Composite core-shell SiC-SiOx nanowires can be produced by heating quartz and SiC powders, with addition of Ar(g) or He(g). The two powders are mixed to create pellets, which will react to SiO(g) and CO(g) at elevated ... -
Exergy relations in manganese production: Modelling the submerged arc furnace
(Master thesis, 2013)A model of the ferromanganese submerged arc furnace was purposed to yield valuable information for exergy calculations. A deeper understanding of at what point exergy is lost in the furnace might yield valuable information ... -
Experimental and Finite Element Studies of Cold Pressure Welding of Commercial Purity Aluminium by Divergent Extrusion
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:253, Doctoral thesis, 2009)This doctoral thesis is concerned with experimental and finite element studies of cold pressure welding of commercial purity aluminium by divergent extrusion. The thesis is divided into five parts. Part I gives a general ... -
Experimental and numerical modelling study on the nucleation and grain growth of inoculated aluminium alloys
(Doctoral theses at NTNU;2017:343, Doctoral thesis, 2017)With the aim to achieve an in-depth understanding on the heterogeneous nucleation and grain growth behavior during solidification of inoculated aluminum alloys, an integrated study by in-situ X-radiography, numerical ... -
An experimental and numerical study of the Portevin-Le Chatelier effect in an AlMg alloy
(Doctoral theses at NTNU;2021:238, Doctoral thesis, 2021) -
Experimental and Numerical Study on Tapping of Two Liquids through a Single Tap-Hole
(Journal article; Peer reviewed, 2023)The production of industrial metals in pyrometallurgical smelting furnaces is central to modern industry. Tapping of metal and slag from smelting furnaces is a complex and difficult process. Any variations from tap to tap ... -
Experimental and theoretical investigations of metal dusting corrosion in plant exposed nickel-based alloys
(Doktoravhandlinger ved NTNU, 1503-8181; 2007:50, Doctoral thesis, 2007)This doctoral thesis is concerned with experimental and theoretical studies of high temperature corrosion phenomena in plant exposed nickel-based alloys. Different complementary experimental techniques have been used to ... -
Experimental and Theoretical Study of the Electronic Structures of Lanthanide Indium Perovskites LnInO3
(Peer reviewed; Journal article, 2021)Ternary lanthanide indium oxides LnInO3 (Ln = La, Pr, Nd, Sm) were synthesized by high-temperature solid-state reaction and characterized by X-ray powder diffraction. Rietveld refinement of the powder patterns showed the ... -
Experimental Assessment of the Compression Strength of Conventional Ceramic Foam Filters, at Room Temperature and 730°C
(Bachelor thesis, 2020)Keramiske filtre (CFF) spiller en viktig rolle når aluminium resirkuleres på grunn av at sekundært aluminium ofte inneholder en stor mengde ikke-metalliske partikler som vil redusere de mekaniske egenskapene til produktet. ... -
Experimental characterization and modeling of aluminum alloy AA3103 for complex single and double strain-path changes
(Journal article; Peer reviewed, 2018)The stress-strain behavior of the aluminum alloy AA3103 subjected to single and double strain-path changes (SPCs) is studied experimentally. The experimental program includes compression-tension, tension-tension, rolling-tension ... -
Experimental Characterization and Modelling of the PLC Effect in an AlMg-Alloy
(Peer reviewed; Journal article, 2021)In the present work, uniaxial tension tests have been conducted to study the mechanical response of a commercial Al4.5wt%Mg alloy (AA5182). The measurements range from the strain rate of 10-4 to 100 s-1 at room temperature. ... -
Experimental Characterization of Two-Phase Steels
(Doctoral theses at NTNU;2019:275, Doctoral thesis, 2019)This thesis consists of several in-situ scanning electron microscope (SEM) tensile test studies of different two- phase steels. Three different two-phase steels have been investigated: a NVE36 plate steel, a dual-phase ...