Browsing Institutt for materialteknologi by Title
Now showing items 2537-2556 of 2573
-
Water as a monomer: synthesis of an aliphatic polyethersulfone from divinyl sulfone and water
(Peer reviewed; Journal article, 2022)Using water as a monomer in polymerization reactions presents a unique and exquisite strategy towards more sustainable chemistry. Herein, the feasibility thereof is demonstrated by the introduction of the oxa-Michael ... -
A Water Model Study of Alumina Feeding and Dispersion
(Journal article; Peer reviewed, 2022) -
Waterborne chitosan-epoxysilane hybrid pretreatments for corrosion protection of zinc
(Journal article; Peer reviewed, 2016)Biopolymer-based systems are extensively studied as green alternatives for traditional polymer coatings, e.g., in corrosion protection. Chitosan–epoxysilane hybrid films are presented in this work as a chitosan-based ... -
Wavelength and orientation dependent capture of light by diatom frustule nanostructures
(Peer reviewed; Journal article, 2015)The ecological success of diatoms is emphasized by regular blooms of many different species in all aquatic systems, but the reason behind their success is not fully understood. A special feature of the diatom cell is ... -
Wear of carbon cathode lining in aluminium electrolysis cell: The effect of rotation speed in laboratory test cell
(Master thesis, 2014)The aluminium smelters are continually trying to increase their production either by designing high amperage cells or increasing the amperage on available cell designs. The service life for aluminium reduction cells is ... -
Wear of Carbon Refractory Materials in Silicon Furnaces
(Master thesis, 2016)The goal of this thesis was to investigate the internal morphology of different types of lining prepared with different installation techniques and different binders, and to see how the internal morphology affects the ... -
Weld thermal simulation of API 5CT L80 grade steel
(Peer reviewed; Journal article, 2021)The microstructure and mechanical properties of an API 5CT L80 casing grade steel (0.24C 0,4Si 1.4Mn CrNiCu) have been studied after performing weld thermal simulations (with and without subsequent tempering) applying a ... -
Welding and Mechanical Testing of Aluminium Alloys for use in Constructions
(Master thesis, 2023)Målet med denne masteroppgaven er å produsere Al-Si-Mg legeringer til bruk i store konstruksjoner, samtidig som styrken ikke skal bli redusert i noen særlig grad som følge av sveising. Metallplater har gått gjennom ulike ... -
Wet Chemical Preparation and Characterisation of Nanocrystalline and BulkYttrium Manganite
(Master thesis, 2009) -
Wet Chemical Synthesis of Graphene for Battery Applications
(Master thesis, 2014)In this thesis, an improved Hummers method is used to produce graphene oxide, while thermal treatment has been used as the reduction process to form reduced graphene oxide. This modified version of Hummers method differs ... -
Wet Chemical Synthesis of Materials for Intermediate Band Solar Cells
(Master thesis, 2011)The economical feasibility of commercial, single-junction solar cells is limited by high costs and limited efficiencies. New solar cell concepts and materials are sought to decrease the production costs and increase the ... -
Wet chemical synthesis of silicon nanoparticles and phosphorescent oxides for white light emitting diodes
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:209, Doctoral thesis, 2014) -
Wet-chemical deposition of silicon quantum dots for enhanced solar cell efficiency
(Master thesis, 2011)Silicon quantum dots were synthesised wet-chemically by three different methods based on reduction of silicon tetrachloride with the reduction agents potassium naphthalide, sodium cyclopentadiene and the alkalide of ... -
Wettability of cokes by Fe-Mn melt
(Peer reviewed; Journal article, 2020)Four metallurgical cokes were heat treated at 1250 °C to 1550 °C in argon atmosphere. The influence of heat treatment on the microstructure of metallurgical cokes was characterized using X-ray diffraction and Raman ... -
WETTABILITY OF MOLTEN Fe-Si-B ALLOY ON GRAPHITE, Al2O3, AND h-BN SUBSTRATES
(Chapter, 2019)Fe-26.38Si-9.35B alloy (numbers in mass %) is of interest as a phase change material (PCM) because it exhibits high thermal conductivity, moderate melting point, high latent heat, and low cost. This study offers valuable ... -
Wettability of Solar GradeSilicon on Silicon Nitride Coated Silica
(Master thesis, 2009) -
Wettable TiB<inf>2</inf> Cathode for Aluminum Electrolysis: A Review
(Peer reviewed; Journal article, 2022)Titanium diboride (TiB2) is considered a promising material for wettable cathodes in aluminum electrolysis. The demand for wettable cathodes is associated with the development of inert anode technologies to eliminate CO2 ... -
Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C
(Journal article; Peer reviewed, 2017)For a successful implementation of newly proposed silicon-based latent heat thermal energy storage systems, proper ceramic materials that could withstand a contact heating with molten silicon at temperatures much higher ... -
Wetting of Carbon Cathodes by Molten Electrolyte and Aluminium
(Journal article; Peer reviewed, 2021)The extent to which the carbon cathode is wetted by molten electrolyte or molten aluminium metal is important for understanding the cathode wear during aluminium electrolysis. The present paper reports on a laboratory study ... -
Wetting properties and interactions of SiO2-CaO-Al2O3 slags on SiC
(Master thesis, 2022)Fuktingsegenskapene til $SiO_2.CaO-Al_2O_3$ slagg på SiC har blitt undersøkt i en fuktingsovn. Seks sammensetninger av slag ble testen på tre forskjellige SiC materialle. Alle slaggene ble funnet til å reagere med SiC, og ...