Blar i Institutt for materialteknologi på tittel
Viser treff 1972-1991 av 2502
-
Shape Factor Effect on Inclusion Sedimentation in Aluminum Melts
(Journal article; Peer reviewed, 2020)The quality requirements of aluminum products are steadily increasing, and the presence of non-metallic inclusions have a large impact on the quality of aluminum products. Sedimentation is a widely applied technique to ... -
Shielded Active Gas Forge Welding of an L80 Steel in a Small Scale Shielded Active Gas Forge Welding Machine
(Peer reviewed; Journal article, 2021)Abstract: The Shielded Active Gas Forge Welding (SAG-FW) method is a solid-state welding technique in which the mating surfaces are heated by induction heating or direct electrical heating before being forged together to ... -
Shielded Active Gas Forge Welding of L80 Steel for Offshore Applications
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:33, Doctoral thesis, 2014) -
Shock Heating Test of Quartz for Si and FeSi Production
(Research report, 2017)Six different quartz types used as raw material for Si and FeSi production, were shock heated to 1500 °C in an induction furnace. The amounts of fines produced were measured and compared. The method has been used before ... -
A short history of multiferroics
(Journal article, 2020)The realization that materials with coexisting magnetic and ferroelectric order open up efficient ways to control magnetism by electric fields unites scientists from different communities in the effort to explore the ... -
Short- and Long-Term Aluminum Filtration Trials with Carbon-Bonded Alumina Filters
(Peer reviewed; Journal article, 2022)In the present study, carbon-bonded alumina filters, normally used for the filtration of steel melts, have been investigated as a potential filter material for the filtration of aluminum. Short- and long-term pilot-scale ... -
Si-based phase change materials in thermal energy storage systems
(Doctoral theses at NTNU;2020:137, Doctoral thesis, 2020)The main aim of this dissertation is to develop new phase change materials (PCMs) for high temperature energy storage in thermal energy storage (TES) devices, with special focus on Si-based PCMs due to silicon’s the high ... -
SiC crystalline micro bullets on bio-carbon based charcoal substrate
(Peer reviewed; Journal article, 2020)Silicon carbide (SiC) micro bullets were grown on a bio-carbon based charcoal substrate, the morphology and crystal structure were analyzed. In order to collect the crystallographic details scanning electron microscopy ... -
SiC formation and SiO reactivity of methane at high temperatures
(Peer reviewed; Journal article, 2021)Methane (CH4) is a carbon source currently not in use in the production of silicon. Using a gaseous carbon source instead of conventional solid carbon sources presents an opportunity to rethink silicon production. Preliminary ... -
SiC production using SiO 2 and Cagglomerates
(Doctoral theses at NTNU;2017:180, Doctoral thesis, 2017)Due to the possible shortage of high-quality fossil carbon materials and charcoal for the Si industry, this study will focus on the possibility of using natural gas as the substitute of commercially scarce high quality ... -
Side reactions on two types of carbon conductive additives in ionic liquid-based electrolytes for high voltage Li-ion battery cathodes
(Master thesis, 2023)Litium-ionbatterier (LIBs) er et godt alternativ for energilagring i elektriske kjøretøy og stasjonær lagring, for eksempel sammen med solceller, i tillegg til å ha mange andre bruksområder. Selv om disse batteriene allerede ... -
Silica from diatom frustules as anode material for Li-ion batteries
(Journal article; Peer reviewed, 2019)In spite of its insulating nature, SiO2 may be utilized as active anode material for Li-ion batteries. Synthetic SiO2 will typically require sophisticated synthesis and/or activation procedures in order to obtain a ... -
Silica Fume Formation in Different Gas Atmospheres
(Peer reviewed; Journal article, 2023)Silica fume is an important byproduct from the silicon production process, with mainly concrete and refractory applications. In this work, the effect of different combustion gas atmospheres on the properties of silica fume ... -
Silicon and indium as secondary cathodes for the analysis of solid alumina and sapphire by slow-flow direct-current glow discharge mass spectrometry
(Peer reviewed; Journal article, 2022)We demonstrate and compare the capabilities of indium and silicon as secondary cathodes for the analysis of flat, solid alumina and sapphire matrices by direct current glow discharge mass spectrometry (dc-GDMS). The mask ... -
Silicon anodes for lithium-ion batteries produced from recovered kerf powders
(Journal article; Peer reviewed, 2019)Silicon kerf waste from a photovoltaic silicon production process is assessed as an anode material for application as a lithium ion battery anode. In contrast to previous studies, the Si-kerf is used as-produced, with no ... -
Silicon Carbide Formation Enhanced by In-Situ-Formed Silicon Nitride: An Approach to Capture Thermal Energy of CO-Rich Off-Gas Combustion
(Journal article; Peer reviewed, 2018)Carbothermic smelting of ores to produce metals or alloys in alternating current open/semiclosed and closed submerged arc furnaces, or in closed direct current furnaces, results in large volumes of CO-rich off-gas being ... -
Silicon carbide formation from methane and silicon monoxide
(Peer reviewed; Journal article, 2020)Silicon carbide (SiC) formation plays an important role during the production of elemental silicon. SiC forms through a high temperature reaction between silicon monoxide gas (SiO) and carbon. Currently, the carbon sources ... -
Silicon directional solidification Impurity segregation and defects
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:161, Doctoral thesis, 2014) -
Silicon for silicon nitride based products
(Master thesis, 2013)Previous studies have shown that the oxide layer on the surface of silicon particles can reduce the hydrogen evolution that comes from contacting silicon with water during slip casting, prior to nitridation. This study ... -
Silicon for silicon nitride based products
(Master thesis, 2014)Previous studies have investigated the effect of the oxide layer (Ovregård 2013) and iron content (Hem 2013) on the nitridation of silicon powders. This report will take a closer look into the growth mechanisms of different ...