Blar i Institutt for materialteknologi på tittel
Viser treff 1656-1675 av 2502
-
Oxidation and Fume Formation from Liquid Silicomanganese Alloys Exposed to Atmospheres Containing Moisture
(Peer reviewed; Journal article, 2022)In industrial applications and laboratory studies, it has been shown that the use of water spray may significantly reduce the amount of fume generated from the oxidation process of liquid high carbon ferromanganese alloy. ... -
Oxidation driven decomposition of CeNbO4 in pure oxygen
(Journal article; Peer reviewed, 2008)CeNbO4 possess oxygen hyper-stoichiometry at ambient and moderate temperature. At elevated temperature CeNbO4+δ is thermally reduced to near stoichiometric CeNbO4 accompanied by a structural phase transition. Above the ... -
Oxidation Kinetics of Nanocrystalline Hexagonal RMn<inf>1-x</inf>Ti<inf>x</inf>O<inf>3</inf> (R = Ho, Dy)
(Journal article; Peer reviewed, 2023) -
Oxidation of Al-Mg alloys in small scale experiments
(Research report, 2019)While a significant amount of work has been done on the oxidation of Al-Mg alloys a limited portion of the work has been done under a true furnace atmosphere created by an air-fuel or oxyfuel burner. A series of oxidation ... -
Oxidation of Liquid Silicon in a Medium Scale Induction Furnace: Examination of the Fuming Rate and Fume Composition
(Master thesis, 2012)The aim of this work was to study the effect of flow rate on the fuming rate/silica flux of liquid silicon in order to gain a better understanding of the silica fuming during industrial ladle refining during silicon ... -
Oxidation of Liquid Silicon in Air Atmospheres Containing Water Vapor
(Peer reviewed; Journal article, 2019)The oxidation of silicon (Si) has been extensively investigated over the past 50 years. Yet, an understanding of the mechanism and rate of liquid Si oxidation in atmospheres containing water vapor, is lacking. The effect ... -
Oxidation of Manganese-Containing Aluminium Alloys: Oxidation of Molten Mn-Containing Al Alloys in Various Atmospheres
(Master thesis, 2013)An oxidation study was performed on 99.99% Al, Al1%Mn and Al5%Mn materials, both ina thermogravimetric furnace, and in a muffle furnace. The mass gain behaviour for thesematerials was studied and compared for dierent ... -
Oxidation of silicon in aqueous media
(Master thesis, 2011)Silicon is used in the production of various ceramic products. As the solar industry is advancing, the need for reusable crucibles for the casting of solar grade silicon has arisen. One idea is to produce silicon nitride ... -
Oxidation of silicon powder in humid air
(Master thesis, 2012)Silicon undergoes oxidation at room temperature, causing a formation of an oxide layer on its surface. Gaining knowledge about the oxide layer formed during ageing, is valuable with regards to production of high quality ... -
Oxidation-Enhanced Evaporation in High-Carbon Ferromanganese
(Peer reviewed; Journal article, 2021)Lifetime and reliability in realistic operating conditions are important parameters for the application of thin-film piezoelectric microelectromechanical systems (piezoMEMS) based on lead zirconate titanate (PZT). Humidity ... -
Oxidative Ladle Refining of Metallurgical Grade Silicon: Refining of Ca and Al Impurities
(Doctoral theses at NTNU;2021:277, Doctoral thesis, 2021)English summary Metallurgical grade silicon (MG-Si) is used as an alloying agent, raw material, or as a precursor compound, in the production of aluminum alloys, silicones, photovoltaics, and electronics. Access to ... -
Oxidative Refining of Metallurgical Grade Silicon: Lab-Scale Measurements on the Overarching Refining Behavior of Ca and Al
(Peer reviewed; Journal article, 2022)Oxidative ladle refining (OLR) is the most widely used refining process for removal of dissolved Ca and Al in the industrial production of metallurgical grade silicon (MG-Si). Refining occurs by purging the silicon alloy ... -
Oxide Hydrogen Interaction and Porosity Development in Al-Si Foundry Alloys
(Master thesis, 2011)The oxide level of an A356 aluminium alloy will be controlled by (i) melting, casting and remelting A356 aluminium alloy for increasing the bi-films levels in the melt, and by (ii) additions of an extruded aluminium oxide ... -
Oxide Sensor Measurements and Simultaneous Optical Observations During Dissolution of Alumina in Cryolite Melt
(Journal article; Peer reviewed, 2022) -
Oxide – organic heterostructures: a case study of charge displacement absence at a SnO2 – copper phthalocyanine buried interface
(Journal article; Peer reviewed, 2018)Reduced tin dioxide/copper phthalocyanine (SnOx/CuPc) heterojunctions recently gained much attention in hybrid electronics due to their defect structure, allowing tuning of the electronic properties at the interface towards ... -
Oxygen absorption in hexagonal manganites
(Doctoral theses at NTNU;2023:192, Doctoral thesis, 2023)Oxygen is one of the worlds most used chemicals, with over 100 million tons of pure O2 being used for industrial and medical purposes each year. The demand for O2 is high, and expected to rise even further due to its ... -
Oxygen Absorption in Nanocrystalline h-RMnO<inf>3</inf> (R = Y, Ho, Dy) and the Effect of Ti Donor Doping
(Journal article; Peer reviewed, 2023) -
Oxygen evolution on La1-xSrxCoO3 Pellet-Electrodes in alkaline Solution: Charge Carrier density dependence of electrocatalytic activity
(Master thesis, 2012)Alkaline water electrolysis need a catalyst with low overpotential and high current densitiy for oxygen evolution in order to be a commercial viable hydrogen source in the future. Finding and establishing a correlation ... -
Oxygen Incorporation and Release in Metastable Bixbyite V2O3 Nanocrystals
(Journal article, 2016)A new, metastable polymorph of V2O3 with a bixbyite structure was recently stabilized in colloidal nanocrystal form. Here, we report the reversible incorporation of oxygen in this material, which can be controlled by varying ... -
Oxygen Non-Stoichiometry and Electrical Conductivity of La0.2Sr0.8Fe0.8B0.2O3 − δ, B = Fe, Ti, Ta
(Journal article; Peer reviewed, 2014)The oxygen non-stoichiometry was determined by coulometric titration for the perovskite oxides La0.2Sr0.8FeO3 − δ and La0.2Sr0.8Fe0.8B0.2O3 − δ (B = Ti4 + and Ta5 +) in the temperature range 600 °C ⩽ T ⩽ 900 °C and the ...