Blar i Institutt for maskinteknikk og produksjon på emneord "VDP::Technology: 500::Mechanical engineering: 570"
Viser treff 1-20 av 75
-
Adaptive Control of Subsea Processes
(Doctoral theses at NTNU;2019:217, Doctoral thesis, 2019) -
Adhesion, Friction and Leakage in Contacts with Elastomers
(Doctoral theses at NTNU;2018:277, Doctoral thesis, 2018)Adhesion, friction and leakage in contacts with elastomers is central to many technologically demanding applications such as tires, seals, wiper blades and syringes to just name a few. These tribological systems are very ... -
Automatic Differentiation and Optimization of Multivectors: Estimating Motors in Conformal Geometric Algebra
(Doctoral theses at NTNU;2017:189, Doctoral thesis, 2017)This thesis is on the estimation of rigid body motions from observations of points, lines, and planes in conformal geometric algebra using nonlinear least-squares optimization. Distance measures based on the ratio and ... -
Characterizing the Mechanical Behavior of Historic Polychrome Wood
(Doctoral theses at NTNU;2021:319, Doctoral thesis, 2021)Stave church is a term derived from the technique of constructing a church using corner posts or staves as loading-bearing pillars. Currently there are only 28 stave churches in Norway, but in the mediaeval period over ... -
Condition-Based Maintenance Models: Application to Subsea Safety Systems
(Doctoral theses at NTNU;2018:375, Doctoral thesis, 2018)This PhD thesis clarifies concepts and challenges in maintenance modelling for subsea systems. The main objective is to develop suitable condition-based maintenance (CBM) models for some typical safety systems in subsea. ... -
Contribution to reliability and availability analysis of novel subsea technologies - Methods and approaches to apply in the early design phase
(Doctoral theses at NTNU;2018:387, Doctoral thesis, 2018) -
Corporate Sustainability Assessment Method Development Using Systems Approach: Addressing the contribution of manufacturing companies to SDGs
(Doctoral theses at NTNU;2018:398, Doctoral thesis, 2018)Launched in 2015, 17 Sustainable Development Goals (SDGs) became the latest conceptualization of sustainable development (SD). Since then, international institutions and researchers have been eager to find means to (1) ... -
Corrosion of Ni-Al bronze in seawater-immersed permanent magnet motors
(Doctoral theses at NTNU;2017:319, Doctoral thesis, 2017) -
Corrosion, hydrogen uptake and environmentally assisted cracking of flexible pipe steel armour wires
(Doctoral theses at NTNU;2022:159, Doctoral thesis, 2022)Flexible pipes are widely used in oil and gas applications. They consist of several metallic and polymeric layers, including a layer of tensile armour wires made from high-strength carbon steels. The armour wires are closely ... -
Decision-oriented Operational Risk Assessment: Contributions to the understanding of operational risk in the oil and gas industry
(Doctoral theses at NTNU;2017:71, Doctoral thesis, 2017) -
Deep Learning Driven Approaches for Predictive Maintenance: A Framework of Intelligent Fault Diagnosis and Prognosis in the Industry 4.0 Era
(Doctoral theses at NTNU;2018:132, Doctoral thesis, 2018) -
Design Coherence: Exploring Conceptual Coherence in Product Design
(Doctoral theses at NTNU;2023:26, Doctoral thesis, 2023) -
Digitalizing Advanced Manufacturing and Maritime Industry: Perspectives on how organizations acquire and commercialize technology through inter-organizational collaboration
(Doctoral theses at NTNU;2019:174, Doctoral thesis, 2019) -
Dynamic Stress In High Head Francis Turbines
(Doctoral theses at NTNU;2019:290, Doctoral thesis, 2019) -
Effect of Hydrogen in Advanced High Strength Alloys Revisited via Small Scale- In-Situ Techniques
(Doctoral theses at NTNU;2020:59, Doctoral thesis, 2020)This thesis demonstrates a comprehensive study on the interaction between hydrogen and plasticity by using in-situ fine scale testing methods. It contains small-scale tensile tests with in-situ SEM observation as well as ... -
Elastomer viscoelasticity and performance of seals in coldclimate applications
(Doctoral theses at NTNU;2017:295, Doctoral thesis, 2017)The Ph.D. thesis addresses the issues of elastomer seals operating in cold climate areas like Arctic. The work is devoted to a better understanding of low-temperature behaviour of elastomer seals near the glass transition ... -
Engineering Change Management in the Engineer-to- Order Production Environment
(Doctoral theses at NTNU;2021:381, Doctoral thesis, 2021)Engineer-to-order (ETO) is a production environment where a product is designed, engineered, and produced based on a customer order. Companies operating in the ETO production environment create complex products tailored ... -
Entrepreneurial Mindset: Defining the concept, how to measure it, how to teach it and its role in the venture creation process
(Doctoral theses at NTNU;2020:122, Doctoral thesis, 2020)The world is facing numerous challenges, and entrepreneurship represents one method for introducing solutions to solve these challenges. For this reason, entrepreneurship is more relevant today than ever. Yet when we ... -
Exploiting available data sources for ex-post evaluation of railway projects: Case illustrations with traffic and mobile phone data
(Doctoral theses at NTNU;2019:69, Doctoral thesis, 2019)Technological developments increase the amount of available data sources in all industries. This thesis focuses on how we can exploit these data sources in ex-post project evaluation to support evaluators with new insight. ... -
Fatigue Assessment of Welded Components through Local Approaches
(Doctoral theses at NTNU;2021:309, Doctoral thesis, 2021)Fatigue is a phenomenon having local nature; it is obvious that an accurate fatigue assessment of a component must take into account the local parameters as close as possible to the reality. Fatigue in welded components ...