Blar i Institutt for maskinteknikk og produksjon på tidsskrift "Materials"
Viser treff 1-20 av 36
-
A novel approach for assessing the fatigue behavior of PEEK in a physiologically relevant environment
(Journal article; Peer reviewed, 2018)In recent years, the need of surgical procedures has continuously increased and, therefore, researchers and clinicians are broadly focusing on the development of new biocompatible materials. Among them, polyetheretherketone ... -
Antibacterial Activity and Cell Responses of Vancomycin-Loaded Alginate Coating on ZSM-5 Scaffold for Bone Tissue Engineering Applications
(Peer reviewed; Journal article, 2022)Despite the significant advancement in bone tissue engineering, it is still challenging to find a desired scaffold with suitable mechanical and biological properties, efficient bone formation in the defect area, and ... -
Attaining High Functional Performance in Biodegradable Mg-Alloys: An Overview of Challenges and Prospects for the Mg-Zn-Ca System
(Peer reviewed; Journal article, 2023)This article presents a concise overview of modern achievements and existing knowledge gaps in the area of biodegradable magnesium alloys. Hundreds of Mg-based alloys have been proposed as candidates for temporary implants, ... -
Bondline thickness effects on damage tolerance of adhesive joints subjected to localized impact damages: Application to leading edge of wind turbine blades
(Peer reviewed; Journal article, 2021)The leading edges of wind turbine blades are adhesively bonded composite sections that are susceptible to impact loads during offshore installation. The impact loads can cause localized damages at the leading edges that ... -
Calibration Method for monitoring hygro-mechanical reactions of coated and uncoated pine and oak wood by Acoustic Emission Non-Destructive Testing
(Peer reviewed; Journal article, 2020)The main issue of wood is its sensitivity to Relative Humidity (RH) variations, affecting its dimensional stability, and thus leading to crack formations and propagations. In situ structural health monitoring campaigns ... -
Carbon nanotubes (CNTs)-reinforced magnesium-based matrix composites: A comprehensive review
(Peer reviewed; Journal article, 2020)In recent years considerable attention has been attracted to magnesium because of its light weight, high specific strength, and ease of recycling. Because of the growing demand for lightweight materials in aerospace, medical ... -
Corrosion and Microstructural Investigation on Additively Manufactured 316L Stainless Steel: Experimental and Statistical Approach
(Peer reviewed; Journal article, 2022)The use of metal additive manufacturing (AM) has strongly increased in the industry during the last years. More specifically, selective laser melting (SLM) is one of the most used techniques due to its numerous advantages ... -
Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding
(Peer reviewed; Journal article, 2022)In this study, corrosion and wear behavior of three kinds of coatings by two processes, namely, plasma electrolytic oxidation (PEO) coatings (Ti/TiO2), gas nitriding coating (Ti/TiN), and the duplex coating (Ti/TiO2-N) by ... -
Effect of Adhesion on Mechanical and Tribological Properties of Glass Fiber Composites, Based on Ultra-High Molecular Weight Polyethylene Powders with Various Initial Particle Sizes
(Peer reviewed; Journal article, 2020)The aim of this study was to assess the effect of adhesion between the non-polar, ultra-high molecular weight polyethylene (UHMWPE) matrix and the glass fiber fillers of various lengths treated with the commercially available ... -
Effect of Air Storage on Stress Corrosion Cracking of ZK60 Alloy Induced by Preliminary Immersion in NaCl-Based Corrosion Solution
(Peer reviewed; Journal article, 2022)The preliminary exposure of Mg alloys to corrosion solutions can cause their embrittlement. The phenomenon is referred to as pre-exposure stress corrosion cracking (PESCC). It has been reported that relatively long storage ... -
Effect of various type of nanoparticles on mechanical and tribological properties of wear-resistant peek + ptfe-based composites
(Peer reviewed; Journal article, 2021)The mechanical and tribological properties of polyetheretherketone (PEEK)- and PEEK + PTFE (polytetrafluoroethylene)-based composites loaded with and four types of nanoparticles (carbonaceous, metallic, bimetal oxide, and ... -
Electrospun Nano-fibers for biomedical and tissue engineering applications: A comprehensive review
(Peer reviewed; Journal article, 2020)Pharmaceutical nano-fibers have attracted widespread attention from researchers for reasons such as adaptability of the electro-spinning process and ease of production. As a flexible method for fabricating nano-fibers, ... -
Experimental Investigation of Thrust Force, Delamination and Surface Roughness in Drilling Hybrid Structural Composites
(Peer reviewed; Journal article, 2021)Filled hybrid composites are widely used in various structural applications where machining is critical. Hence, it is essential to understand the performance of the fibre composites’ machining behaviour. As such, a new ... -
Fatigue behavior of porous Ti-6Al-4V made by laser-engineered net shaping
(Journal article; Peer reviewed, 2018)The fatigue behavior and fracture mechanisms of additively manufactured Ti-6Al-4V specimens are investigated in this study. Three sets of testing samples were fabricated for the assessment of fatigue life. The first batch ... -
Fracture assessment of PEEK under static loading by means of the local strain energy density
(Journal article; Peer reviewed, 2017)Polyetheretherketone (PEEK) has gained interest in many industrial applications due to its high strength-to-weight ratio, excellent heat tolerance and high corrosion resistance. Stress concentrators such as notches and ... -
Friction stir welding/processing of mg-based alloys: A critical review on advancements and challenges
(Peer reviewed; Journal article, 2021)Friction stir welding (FSW) and friction stir processing (FSP) are two of the most widely used solid-state welding techniques for magnesium (Mg) and magnesium alloys. Mg-based alloys are widely used in the railway, aerospace, ... -
The Functional Properties of Mg–Zn–X Biodegradable Magnesium Alloys
(Journal article; Peer reviewed, 2020)The implantation of metallic devices in orthopaedic surgical procedures and coronary angioplasty is associated with the risk of various adverse events: (i) mechanical (premature failure), (ii) chemo-mechanical (corrosion ... -
Improved Bacteriostatic and Anticorrosion Effects of Polycaprolactone/Chitosan Coated Magnesium via Incorporation of Zinc Oxide
(Peer reviewed; Journal article, 2021)Magnesium has been recognized as a groundbreaking biodegradable biomaterial for implant applications, but its use is limited because it degrades too quickly in physiological solutions. This paper describes the research on ... -
Improving pallet mover safety in the manufacturing industry: A bow-tie analysis of accident scenarios
(Journal article; Peer reviewed, 2018)A Belgian manufacturing company uses pallet movers for internal transport. Despite the company’s efforts to improve occupational safety, accidents with pallet movers remain noteworthy. In order to control occupational ... -
An in-situ electrochemical nanoindentation (ECNI) study on the effect of hydrogen on the mechanical properties of 316L austenitic stainless steel
(Peer reviewed; Journal article, 2021)In-situ electrochemical nanoindentation (ECNI) has been used to study the effect of hydrogen on the mechanical properties of austenitic stainless steel AISI 316L. Changing the electrode potential (via electrochemical ...