Blar i Institutt for maskinteknikk og produksjon på tidsskrift "Polymers"
Viser treff 1-19 av 19
-
3D Printable Filaments Made of Biobased Polyethylene Biocomposites
(Journal article; Peer reviewed, 2018)Two different series of biobased polyethylene (BioPE) were used for the manufacturing of biocomposites, complemented with thermomechanical pulp (TMP) fibers. The intrinsic hydrophilic character of the TMP fibers was ... -
Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications
(Peer reviewed; Journal article, 2022)With the advent of “intelligent” materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds ... -
Designing Composite Adaptive Propeller Blades with Passive Bend–Twist Deformation for Periodic-Load Variations Using Multiple Design Concepts
(Peer reviewed; Journal article, 2023)Four plausible design concepts are applied together to investigate composite bend–twist propeller-blade designs that show high twisting per bending deflection. The design concepts are first explained on a simplified blade ... -
Effect of Transfer Film on Tribological Properties of Anti-Friction PEI- and PI-Based Composites at Elevated Temperatures
(Peer reviewed; Journal article, 2022)The structure, mechanical and tribological properties of the PEI- and PI-based composites reinforced with Chopped Carbon Fibers (CCF) and loaded with commercially available micron-sized solid lubricant fillers of various ... -
Efficient Improvement in Fracture Toughness of Laminated Composite by Interleaving Functionalized Nanofibers
(Journal article; Peer reviewed, 2021)Functionalized polyacrylonitrile (PAN) nanofibers were used in the present investigation to enhance the fracture behavior of carbon epoxy composite in order to prevent delamination if any crack propagates in the resin rich ... -
Experimental verification of the elastic response in a numeric model of a composite propeller blade with bend twist deformation
(Journal article; Peer reviewed, 2021) -
Fire behavior of wood-based composite materials
(Peer reviewed; Journal article, 2021)Wood-based composites such as wood plastic composites (WPC) are emerging as a sustainable and excellent performance materials consisting of wood reinforced with polymer matrix with a variety of applications in construction ... -
Fused filament fabrication-4d-printed shape memory polymers: A review
(Peer reviewed; Journal article, 2021)Additive manufacturing (AM) is the process through which components/structures are produced layer-by-layer. In this context, 4D printing combines 3D printing with time so that this combination results in additively ... -
Impact response and damage tolerance of hybrid glass/kevlar-fibre epoxy structural composites
(Peer reviewed; Journal article, 2021)The present study is aimed at investigating the effect of hybridisation on Kevlar/E-Glass based epoxy composite laminate structures. Composites with 3 mm thickness and 16 layers of fibre (14 layers of E-glass centred and ... -
Influence of Compounding Parameters on the Tensile Properties and Fibre Dispersion of Injection-Moulded Polylactic Acid and Thermomechanical Pulp Fibre Biocomposites
(Peer reviewed; Journal article, 2022)Thermomechanical pulp (TMP) fibres can serve as renewable, cost-efficient and lightweight reinforcement for thermoplastic polymers such as poly(lactic acid) (PLA). The reinforcing ability of TMP fibres can be reduced due ... -
Mechanism of Yellowing: Carbonyl Formation during Hygrothermal Aging in a Common Amine Epoxy
(Journal article; Peer reviewed, 2018)Epoxies are often exposed to water due to rain and humid air environments. Epoxy yellows during its service time under these conditions, even when protected from UV radiation. The material’s color is not regained upon ... -
On the post-processing of 3d-printed abs parts
(Journal article; Peer reviewed, 2021) -
Optimisation of Mechanical Properties in Saw-Dust/Woven-Jute Fibre/Polyester Structural Composites under Liquid Nitrogen Environment Using Response Surface Methodology
(Journal article; Peer reviewed, 2021)Natural fibre-based composites are replacing traditional materials in a wide range of structural applications that are used in different environments. Natural fibres suffer from thermal shocks, which affects the use of ... -
Polymethyl Methacrylate-Based Bone Cements Containing Carbon Nanotubes and Graphene Oxide: An Overview of Physical, Mechanical, and Biological Properties
(Peer reviewed; Journal article, 2020)Every year, millions of people in the world get bone diseases and need orthopedic surgery as one of the most important treatments. Owing to their superior properties, such as acceptable biocompatibility and providing great ... -
Recent advances in chemically-modified and hybrid carrageenan-based platforms for drug delivery, wound healing, and tissue engineering
(Peer reviewed; Journal article, 2021)Recently, many studies have focused on carrageenan-based hydrogels for biomedical applications thanks to their intrinsic properties, including biodegradability, biocompatibility, resembling native glycosaminoglycans, ... -
A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design
(Peer reviewed; Journal article, 2022)In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials ... -
Structural integrity of polymeric components produced by additive manufacturing (Am)—polymer applications
(Journal article; Peer reviewed, 2021) -
Time-Temperature-Plasticization Superposition Principle: Predicting Creep of a Plasticized Epoxy
(Journal article; Peer reviewed, 2019)Long-term creep properties and the effect of water are important for fiber reinforced polymer (FRP) composite materials used in offshore applications. Epoxies are often used as a matrix material in such composites. A typical ... -
Wood dust flammability analysis by microscale combustion calorimetry
(Peer reviewed; Journal article, 2022)To study the practicability of a micro combustion calorimeter to analyze the calorimetry kinetics of wood, a micro combustion calorimeter with 13 heating rates from 0.1 to 5.5 K/s was used to perform the analysis of 10 ...