Blar i Institutt for konstruksjonsteknikk på tidsskrift "Polymer testing"
Viser treff 1-5 av 5
-
Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures
(Journal article; Peer reviewed, 2016)In this study, we present a method to determine the large-strain tensile behaviour of polymers at low temperatures using a purpose-built temperature chamber made of polycarbonate (PC). This chamber allows for several cameras ... -
Impact of stress triaxiality, strain rate, and temperature on the mechanical response and morphology of PVDF
(Journal article; Peer reviewed, 2022) -
Influence of stress triaxiality and strain rate on stress-strain behaviour and dilation of mineral-filled PVC
(Journal article; Peer reviewed, 2019)The influence of stress triaxiality and strain rate on the tensile behaviour of mineral-filled polyvinyl chloride (PVC) is investigated in this paper. Axisymmetric notched tensile specimens with notch radius equal to 20 mm, ... -
A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics
(Peer reviewed; Journal article, 2020)Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation ... -
Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures
(Journal article; Peer reviewed, 2016)This article presents uniaxial tension tests of three different elastomer compounds commonly applied as seal materials in the oil and gas industry. The tests were performed at five different temperatures, ranging from −20 ...