Blar i Fakultet for ingeniørvitenskap (IV) på tidsskrift "Materials"
Viser treff 1-20 av 75
-
3D printed thermoelectric polyurethane/multiwalled carbon nanotube nanocomposites: A novel approach towards the fabrication of flexible and stretchable organic thermoelectrics
(Peer reviewed; Journal article, 2020)Three-dimensional (3D) printing of thermoelectric polymer nanocomposites is reported for the first time employing flexible, stretchable and electrically conductive 3D printable thermoplastic polyurethane (TPU)/multiwalled ... -
A novel approach for assessing the fatigue behavior of PEEK in a physiologically relevant environment
(Journal article; Peer reviewed, 2018)In recent years, the need of surgical procedures has continuously increased and, therefore, researchers and clinicians are broadly focusing on the development of new biocompatible materials. Among them, polyetheretherketone ... -
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines
(Journal article; Peer reviewed, 2017)Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, ... -
Advanced simulation of removing chromium from a synthetic wastewater by rhamnolipidic bioflotation using hybrid neural networks with metaheuristic algorithms
(Peer reviewed; Journal article, 2021)This work aims at presenting an advanced simulation approach for a novel rhamnolipidic-based bioflotation process to remove chromium from wastewater. For this purpose, the significance of key influential operating variables ... -
Advances in Permanent Deformation Modeling of Asphalt Concrete—A Review
(Journal article; Peer reviewed, 2022)Permanent deformation is one of the dominant asphalt concrete damages. Significant progress has been made to realistically predict the damage. In the last decade, the mechanistic approach has been the focus of research, ... -
Antibacterial Activity and Cell Responses of Vancomycin-Loaded Alginate Coating on ZSM-5 Scaffold for Bone Tissue Engineering Applications
(Peer reviewed; Journal article, 2022)Despite the significant advancement in bone tissue engineering, it is still challenging to find a desired scaffold with suitable mechanical and biological properties, efficient bone formation in the defect area, and ... -
Attaining High Functional Performance in Biodegradable Mg-Alloys: An Overview of Challenges and Prospects for the Mg-Zn-Ca System
(Peer reviewed; Journal article, 2023)This article presents a concise overview of modern achievements and existing knowledge gaps in the area of biodegradable magnesium alloys. Hundreds of Mg-based alloys have been proposed as candidates for temporary implants, ... -
Bondline thickness effects on damage tolerance of adhesive joints subjected to localized impact damages: Application to leading edge of wind turbine blades
(Peer reviewed; Journal article, 2021)The leading edges of wind turbine blades are adhesively bonded composite sections that are susceptible to impact loads during offshore installation. The impact loads can cause localized damages at the leading edges that ... -
Calibration Method for monitoring hygro-mechanical reactions of coated and uncoated pine and oak wood by Acoustic Emission Non-Destructive Testing
(Peer reviewed; Journal article, 2020)The main issue of wood is its sensitivity to Relative Humidity (RH) variations, affecting its dimensional stability, and thus leading to crack formations and propagations. In situ structural health monitoring campaigns ... -
Carbon nanotubes (CNTs)-reinforced magnesium-based matrix composites: A comprehensive review
(Peer reviewed; Journal article, 2020)In recent years considerable attention has been attracted to magnesium because of its light weight, high specific strength, and ease of recycling. Because of the growing demand for lightweight materials in aerospace, medical ... -
Comparative Life Cycle Assessment of a Novel Al-Ion and a Li-Ion Battery for Stationary Applications
(Journal article; Peer reviewed, 2019)The foreseen high penetration of fluctuant renewable energy sources, such as wind andsolar, will cause an increased need for batteries to store the energy produced and not instantaneouslyconsumed. Due to the high production ... -
Comparative study of thermal-oxidative aging and salt solution aging on bitumen performance
(Journal article; Peer reviewed, 2021) -
Corrosion and Microstructural Investigation on Additively Manufactured 316L Stainless Steel: Experimental and Statistical Approach
(Peer reviewed; Journal article, 2022)The use of metal additive manufacturing (AM) has strongly increased in the industry during the last years. More specifically, selective laser melting (SLM) is one of the most used techniques due to its numerous advantages ... -
Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding
(Peer reviewed; Journal article, 2022)In this study, corrosion and wear behavior of three kinds of coatings by two processes, namely, plasma electrolytic oxidation (PEO) coatings (Ti/TiO2), gas nitriding coating (Ti/TiN), and the duplex coating (Ti/TiO2-N) by ... -
Determining the Vapour Resistance of Breather Membrane Adhesive Joints
(Peer reviewed; Journal article, 2022)Due to increasingly stringent requirements, tapes and adhesive joints are a commonly used method to ensure tightness and energy efficiency in modern building envelopes. Previous studies have researched and tested properties ... -
Diffusion mechanism of rejuvenator and its effects on the physical and rheological performance of aged asphalt binder
(Peer reviewed; Journal article, 2019)Using rejuvenator to improve the asphalt pavement service state has become an increasing concern in recent years. This study mainly focuses on the diffusion analysis between rejuvenator and aged asphalt, and further ... -
Effect of Adhesion on Mechanical and Tribological Properties of Glass Fiber Composites, Based on Ultra-High Molecular Weight Polyethylene Powders with Various Initial Particle Sizes
(Peer reviewed; Journal article, 2020)The aim of this study was to assess the effect of adhesion between the non-polar, ultra-high molecular weight polyethylene (UHMWPE) matrix and the glass fiber fillers of various lengths treated with the commercially available ... -
Effect of Air Storage on Stress Corrosion Cracking of ZK60 Alloy Induced by Preliminary Immersion in NaCl-Based Corrosion Solution
(Peer reviewed; Journal article, 2022)The preliminary exposure of Mg alloys to corrosion solutions can cause their embrittlement. The phenomenon is referred to as pre-exposure stress corrosion cracking (PESCC). It has been reported that relatively long storage ... -
Effect of various type of nanoparticles on mechanical and tribological properties of wear-resistant peek + ptfe-based composites
(Peer reviewed; Journal article, 2021)The mechanical and tribological properties of polyetheretherketone (PEEK)- and PEEK + PTFE (polytetrafluoroethylene)-based composites loaded with and four types of nanoparticles (carbonaceous, metallic, bimetal oxide, and ... -
Electrospun Nano-fibers for biomedical and tissue engineering applications: A comprehensive review
(Peer reviewed; Journal article, 2020)Pharmaceutical nano-fibers have attracted widespread attention from researchers for reasons such as adaptability of the electro-spinning process and ease of production. As a flexible method for fabricating nano-fibers, ...