Blar i Fakultet for ingeniørvitenskap (IV) på tittel
Viser treff 9468-9487 av 22956
-
Gap Resonance Analyzed by a Domain-Decomposition Method
(Chapter, 2011) -
Gap Tolerance for Friction Stir Welding of Large, Extruded Aluminum Profiles
(Master thesis, 2022)Friksjonssveising er en metode for sammenføyning av materialer, som aluminium, uten bruk av tilsatsmateriale eller en ekstern varmekilde. Denne studien har undersøkt hvor robust friksjonssveiseprosessen er ved varierende ... -
Gas cavity-body interactions: Efficient numerical solution
(Journal article; Peer reviewed, 2015)The paper investigates the interactions occurring between a gas cavity, the surrounding liquid and the nearby structures. In more detail, focus is in the characterization of the various dynamical phases (e.g. “acoustic ... -
Gas Channeling Effect for Tophole Cement Job and Methodology for Curing That (lab experiment)
(Master thesis, 2023)Sammendrag Denne masteroppgaven bygger videre på og utvider arbeidet som ble utført for spesialiseringsprosjektet TPG 4560. Flere deler av litteraturgjennomgangen i denne rapporten er hentet fra det prosjektet, med riktige ... -
Gas Cleaning with Granular Bed Filter
(Master thesis, 2009) -
Gas Cleaning with Granular Bed Filter
(Master thesis, 2009)A literature study is first presented then the practical experiments are described. The theoretical chapter provides an overview of filtration mechanisms and available gas cleaning technologies, with an emphasis on hot gas ... -
Gas cleaning with Granular Filters
(Master thesis, 2007)The panel bed filter (PBF) is a granular filter patented by A. M. Squires in the late sixties. PBFs consist of louvers with stationary, granular beds. Dust is deposited in the top layers and on the bed surface when gas ... -
Gas Compression Tool Validation
(Master thesis, 2011)A decline in field developments on the Norwegian Continental Shelf over the last years has led to an increase in tie-ins of smaller- and more stranded fields to the existing production facilities. This results in more ... -
Gas Compressor Laboratory Upgrades
(Master thesis, 2022)The compressor laboratory at NTNU Valgrinda created in 2018, need some upgrades to properly function as a anti-surge compressor laboratory. The laboratory is being used by control students to learn how to tune controllers ... -
Gas explosions in process pipes
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:79, Doctoral thesis, 2004)In this thesis, gas explosions inside pipes are considered. Laboratory experiments and numerical simulations are the basis of the thesis. The target of the work was to develop numerical models that could predict accidental ... -
Gas flow through shallow sediments - A case study using passive and active seismic field data
(Journal article; Peer reviewed, 2019)Offshore Quaternary sediment sequences are generally weak and unconsolidated, and fluid flow through these rock formations is hard to predict or model. Surface flow observations, such as gas seeps, often appear random and ... -
Gas Influx Handling for Dual Gradient Drilling
(Doktoravhandlinger ved NTNU, 1503-8181; 2011:338, Doctoral thesis, 2011)New drilling technology is primarily developed when limitations of existing technology makes it difficult or impossible to reach new targets. Drilling in deep waters and in depleted reservoirs is less profitable or too ... -
Gas switching reforming (GSR) for power generation with CO2 capture: Process efficiency improvement studies
(Journal article; Peer reviewed, 2019)This paper presents the process improvement studies of a combined cycle power plant integrated with a novel gas switching reforming (GSR) process for hydrogen production with integrated CO2 capture. The overall process is ... -
Gas Switching Reforming (GSR) for syngas production with integrated CO2 capture using iron-based oxygen carriers
(Journal article; Peer reviewed, 2019)The process behavior of a Gas Switching Reforming (GSR) reactor was studied using three different iron-based oxygen carrier materials: Iron-oxide on Alumina, Iron-Nickel oxide on Alumina and Iron-Ceria on Alumina. It was ... -
Gas switching reforming for flexible power and hydrogen production to balance variable renewables
(Peer reviewed; Journal article, 2019)Variablerenewableenergy(VRE)isexpectedtoplayamajorroleinthedecarbonizationoftheelectricitysector.However, decarbonization via VRE requires a fleet of flexible dispatchable plants with low CO2emissions tosupplycleanpowerduringtimes ... -
Gas Switching Reforming for syngas production with iron-based oxygen carrier-the performance under pressurized conditions
(Journal article; Peer reviewed, 2019)A four-stage Gas Switching Reforming for syngas production with integrated CO2 capture using an iron-based oxygen carrier was investigated in this study. The oxygen carrier was first reduced using dry methane, where high ... -
Gas switching technology: Economic attractiveness for chemical looping applications and scale up experience to 50 kWth
(Peer reviewed; Journal article, 2022)Gas switching technology (GST) was introduced to facilitate operation and scale-up of pressurized chemical looping-based technologies thus bringing the expected benefits of reducing costs and energy penalty of CO2 capture. ... -
Gas Turbine Deterioration and Recovery
(Master thesis, 2016)Gas turbines used in the platform industry are subjected to challenging operating conditions in the harsh offshore environment. Compressor fouling is reported to be the main reason for gas turbine performance loss and can ... -
Gas turbine exhaust gas heat recovery by organic Rankine cycles (ORC) for offshore combined heat and power applications - Energy and exergy analysis
(Journal article; Peer reviewed, 2018)Effective heat and power supply to offshore installations leads to environmental benefits, but the efficiency is often limited by requirements and constraints connected to the offshore environment. An exergetic analysis ... -
Gas Turbine Intake Filters
(Master thesis, 2009)