Blar i Fakultet for ingeniørvitenskap (IV) på tittel
Viser treff 41-60 av 23003
-
3D Claying: 3D Printing and Recycling Clay
(Peer reviewed; Journal article, 2023)Clay is of great interest as a 3D printing material thanks to its ease of use, recyclability and reusability. This paper analyses the technical aspects of the whole printing process. The behaviour of 3D printing clay is ... -
3D Cohesive Modelling of Hydrogen Embrittlement in the Heat Affected Zone of X70 Steel
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:53, Doctoral thesis, 2014) -
3D Domain Decomposition for Violent Wave-Ship Interactions
(Journal article, 2013)A 3D Domain-Decomposition (DD) strategy has been developed to deal with violent wave-ship interactions involving water-on-deck and slamming occurrence. It couples a linear potential flow seakeeping solver with a Navier–Stokes ... -
3D evolution of detachment fault systems in necking domains: insights from the Klakk Fault Complex and the Frøya High, mid-Norwegian rifted margin
(Journal article, 2023)Detachment fault systems typically record displacements in the order of 10s of kilometers. The principles that control the growth of smaller magnitude normal faults are not fully applicable to the evolution of detachment ... -
3D FE tool for time dependent settlement predictions
(Chapter, 2016)A newly developed calculation tool for fully coupled general 3D finite element consolidation analyses is presented. The development has been part of an ongoing Research and Development project called GeoFuture and the tool ... -
A 3D fully-nonlinear potential-flow solver for efficient simulations of large-scale free-surface waves
(Journal article; Peer reviewed, 2022) -
3D Geological Model of the Garn and Not Formations in Norne Field, Mid-offshore Norway
(Master thesis, 2015)Norne Field is one of the hydrocarbon fields in the Norwegian Sea. This field has an area of approximately 9km x 3km which lies in the transition between two structural elements that are the Dønna Terrace and the Nordland ... -
3D geomodell Gløshaugenområdet, Trondheim
(Master thesis, 2020) -
3D geophysical and geological modelling of the Karasjok Greenstone Belt
(Master thesis, 2014)The Karasjok Greenstone Belt (KGB) is a linear segment of rift-related metavolcanic and metasedimentary rocks and forms the northeastern prolongation of the Paleoproterozoic Central Lapland Greenstone Belt in the Fennonscandian ... -
3D in-Situ Stress Model of Upper Tamakoshi Hydroelectric Project Area
(Journal article; Peer reviewed, 2017)Reliable estimation of in-situ stress state is very important in implementing the shotcrete lined/unlined tunnels and shafts. The in-situ stress state of the area of concern is mainly governed by the gravityinduced stress, ... -
3D Integration technology: Status and application development
(Journal article; Peer reviewed, 2010)As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ... -
3D interpretation of helicopter-borne frequency-domain electromagnetic (HEM) data from Ramså Basin and adjacent areas at Andøya, Norway
(Peer reviewed; Journal article, 2020)The Ramså Basin is situated on the strandflat on the northeastern side of Andøya between Ramså and Skarstein. It is the only known Mesozoic sedimentary basin onshore Norway and therefore represents an easily accessible ... -
3D Joint Inversion of Scanning Magnetic Microscopy Data
(Journal article; Peer reviewed, 2021)Scanning magnetic microscopy (SMM) is a modern magnetometry technique that maps the magnetic anomalies resulting from small-scale variations of remanent magnetization within a sample. This information is vital to understand ... -
3D LiDAR and multi-technology collaboration for preservation of built heritage in China: A review
(Peer reviewed; Journal article, 2023)In recent years, the technical application of 3D LiDAR has gradually expanded to the field of built heritage. 3D scanning, high-precision measurement, and reconstruction have enriched the methods of built heritage preservation ... -
3D modelling of underwater archaeological artefacts
(Master thesis, 2014)Underwater photogrammetry is a good alternative to traditional archaeological excavations, which are often less accurate and very destructive to underwater artefacts Furthermore the photogrammetric principles applied with ... -
3D motion dynamics of axisymmetric bodies falling through water
(Journal article; Peer reviewed, 2018)A new simplified method for analysis of 3D motion dynamics of axisymmetric slender bodies falling from air through water is presented. Slender-body theory for potential flow of incompressible water is combined with 2D + t ... -
3D NUMERICAL INVESTIGATION ON SETTLING BASIN LAYOUT: A case study on Mai Khola Hydropower Project, Nepal
(Master thesis, 2012)This study is about 3D Numerical Investigation of Settling basin layout by using numerical modeling program SSIIM. This study is carried out by using SSIIM windows version 1 (SSIIM 1.0). SSIIM is numerical modeling software, ... -
3D numerical modeling of a river confluence – movable bed implications
(Master thesis, 2022)River confluences are the morphodynamically challenging sections of river networks. Regardless of their occurrence which can be manually or naturally, they are constantly changing and are dominated by a complex flow pattern. ... -
3D Numerical modeling of flow over an artificial gravel bed
(Master thesis, 2014)The understanding of flow structures over static armor layers is essential for the development of modern sediment transport models, including functions for the influence of particle hiding and exposure. Coherent turbulent ...