Browsing Fakultet for ingeniørvitenskap (IV) by Title
Now showing items 17266-17285 of 23131
-
Propagation Measurements for IQRF Network in an Urban Environment
(Peer reviewed; Journal article, 2022)Recently, IQRF has emerged as a promising technology for the Internet of Things (IoT), owing to its ability to support short- and medium-range low-power communications. However, real world deployment of IQRF-based wireless ... -
Propellproduksjon ved bruk av additive produksjonsmetoder
(Bachelor thesis, 2024)I dette prosjektet ble dagens produksjonsprosess av vribare propellblad sammenlignet med 3D-printing, spesielt med fokus på Wire Arc Additive Manufacturing (WAAM)-teknologi. Dette med formål å forbedre reservedelsproduksjonen ... -
Properties and behavior of quartz for the silicon process
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:236, Doctoral thesis, 2008) -
Properties and Diagenesis of Upper Palaeozoic Sandstones, Bjørnøya
(Master thesis, 2021)Lagrekka på Bjørnøya, den lille øya midt mellom Fastlands-Norge og Spitsbergen, strekker seg fra prekambrium til trias, og er en god analog til Barentssokkelen. Sandsteinsprøver fra senpaleozoikum ble samlet på feltarbeid ... -
Properties of breaking irregular waves over slopes
(Peer reviewed; Journal article, 2020)The present study numerically investigates the breaking and spectral characteristics and geometric properties of breaking irregular waves over slopes for different incident waves. The growth of wave non-linearity and wave ... -
Properties of Deep Weathered Swelling Clay and its Stability Implications in Tunnelling
(Master thesis, 2019)Remains of subtropical deep weathered clay found in fracture and weakness zones in the bedrock in the Trøndelag area yields poor conditions for tunnel construction and have resulted in expensive difficulties for such ... -
The Properties of Different Healing Agents Considering the Micro-Self-Healing Process of Asphalt with Encapsulations
(Peer reviewed; Journal article, 2021)Improving the self-healing performance of asphalt by employing encapsulation technology is a topic of wide interest. This study investigated the performance of sunflower oil, engine oil, and waste cooking oil based on the ... -
Properties of thermal sprayed coatings for internal use in pipes and bends
(Master thesis, 2015)NTNU/SINTEF are participating in a research project called Smooth Surfaces , financed by Norsk Forskningsråd, and with Brunvoll, Triplex, Omya Hustadmarmor and Aquamarine as industry partners in the project. One of the ... -
Properties of TSA in natural seawater at ambient and elevated temperature
(Journal article; Peer reviewed, 2019)Electrochemical properties of thermal sprayed aluminium (TSA) coating were investigated in natural seawater at elevated temperatures with and without cathodic protection (CP). TSA has a low current density requirement when ... -
Properties of waterproof sprayed concrete tunnel linings: A study of EVA-based sprayed membranes for waterproofing of rail and road tunnels in hard rock and cold climate
(Doctoral thesis at NTNU;2015:197, Doctoral thesis, 2015)Investigate the long term effects of exposure of the SCL lining to higher ground water pressure, particularly the exposure of the membrane to pressurized water at cracks Investigate the effects of slow deformations ... -
Properties, Requirements and Possibilities of Smart Windows for Dynamic Daylight and Solar Energy Control in Buildings: A State-of-the-Art Review
(Journal article; Peer reviewed, 2010)A survey on prototype and currently commercial dynamic tintable smart windows has been carried out. The technologies of electrochromic, gasochromic, liquid crystal and electrophoretic or suspended-particle devices were ... -
Proposal and comparison of an eXogenous Kalman Filter and a Particle Filter for use with ROV thruster models
(Master thesis, 2018)Robust and accurate observer design is a prerequisite for safe and efficient underwater navigation. Especially with today's increased focus on automation and autonomy. In this thesis two model based observer designs for ... -
Proposals for enhancing tactical planning in grocery retailing with S&OP
(Journal article; Peer reviewed, 2018)Purpose The purpose of this paper is to explore tactical planning in grocery retailing and propose how process and integration mechanisms from sales and operations planning (S&OP) can enhance retail tactical ... -
Proposed aspects for evaluation of the value of spaces in historic buildings
(Journal article; Peer reviewed, 2015)There is an unrealised potential for new uses of cultural heritage sites. The purpose of this paper is to identify evaluation aspects for assessing the potential of new uses for cultural heritage places and test the proposed ... -
Proposed framework for flexible de- and remanufacturing systems using cyber-physical systems, additive manufacturing, and digital twins
(Peer reviewed; Journal article, 2022)Under the circular economy paradigm, de- and remanufacturing systems are more relevant than ever. However, such systems present specific challenges related to the system structure, automation, and recovery of complex ... -
Proposed Measures for Cost Reduction in the NTNU Campus Collection Project
(Master thesis, 2022)Denne masteroppgaven er et samarbeid med Statsbygg som omhandler NTNU Campussamlingsprosjektet. Prosjektet styres etter prosjektstrategien Design to Cost (DtC) som har satt en absolutt kostnadsramme på 11.032 milliarder ... -
A proposed simplified technique for confirming high precision GNSS antenna offsets
(Journal article; Peer reviewed, 2010)The purpose of this research was to independently investigate and determine confirmatory calibration procedures for GNSS antennas. This paper focuses on the aspect of simplified techniques for confirming high precision ... -
Proposing a novel approach for testing complex medical task trainer prototypes
(Chapter, 2020)Using the Wayfaring model in the Fuzzy Front End of product development can aid designers in uncovering and answering ambiguous design questions. However, it does not aid the challenge of combining insights and concepts ... -
Propulsion control and thrust allocation on marine vessels
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:203, Doctoral thesis, 2008) -
Propulsion methods for under water snake robots - Investigation and simulation using foil for propulsion of a snake robot
(Master thesis, 2015)In this thesis we present a model of a swimming underwater snake robot. How aquatic animals move in water has fascinated people for decades. NTNU started the research on land based snake robots 11 years ago. The last years ...