Browsing NTNU Open by Document Types "Chapter"
Now showing items 1-20 of 3982
-
0-RTT Key Exchange with Full Forward Secrecy
(Chapter, 2017)Reducing latency overhead while maintaining critical security guarantees like forward secrecy has become a major design goal for key exchange (KE) protocols, both in academia and industry. Of particular interest in this ... -
1.9 micron Tm3+-doped germanate fiber laser source for Si-processing
(Chapter, 2011)We report development of a novel Tm3+ -doped fiber laser source at 1.86 μm based on highly nonlinear 55GeO2-45SiO2 dispersion shifted fiber, applicable to 3D-volume microprocessing of Si. -
11 years of Experts in teamwork at NTNU
(Chapter, 2012)“Experts in teamwork” is an obligatory subject for all master students at the Norwegian University of Science and Technology (NTNU). The students are organised in interdisci-plinary teams of 5 from at least 3 different ... -
2.4 μm dual-comb spectroscopy
(Chapter, 2010)A proof-of-principle experiment of mid-infrared frequency comb Fourier transform spectroscopy is carried out with two interfering Cr2+:ZnSe femtosecond oscillators, emitting around 2400 nm. Spectra of acetylene are measured ... -
2D Numerical Study on Wake Scenarios for a Flapping Foil
(Chapter, 2021)Fishes are talented swimmers. Depending on the propulsion mechanisms many fishes can use flapping tails and/or fins to generate thrust, which seems to be connected to the formation of a reverse von Kármán wake. In the ... -
3-D Nautical Charts as Decision Support for Land Based Piloting
(Chapter; Peer reviewed, 2008)In the event that remote pilotage is introduced in a wider extent, this paper suggests using nautical charts displayed in a 3-D egocentric perspective to improve situation awareness for both for the land based pilot and ... -
3-Phase Multi-Functional Grid-Tied Inverter for Compensation of Oscillating Instantaneous Power
(Chapter, 2019)The primary objective of this paper is to present the basic terms of Conservative Power Theory (CPT) and its applications for compensating instantaneous power oscillations in three-phase three-wire systems. The reference ... -
3D Computer Graphics and Nautical Charts
(Chapter; Peer reviewed, 2011)This paper gives an overview of an ongoing project using real-time 3D visualization to display nautical charts in a way used by 3D computer games. By displaying the map in an egocentric perspective the need to make cognitively ... -
3D Coordinated Path Following with Disturbance Rejection for Formations of Under-actuated Agents
(Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes 2015;CDC 2015, Chapter, 2015)In this paper coordinated path following for formations of under-actuated agents in three dimensional space is considered. The agents are controlled to follow a straight-line path whilst being affected by an unknown ... -
3D FE tool for time dependent settlement predictions
(Chapter, 2016)A newly developed calculation tool for fully coupled general 3D finite element consolidation analyses is presented. The development has been part of an ongoing Research and Development project called GeoFuture and the tool ... -
3D Numerical modelling of pile scour with free surface profile under waves and current using the level set method in model REEF3D
(Chapter, 2016)Wave action stirs up sediments and keeps it in suspension while currents wash it away from the coastal zone. The combined action of the waves and current close to the sediment bed may worsen the situation by creating ... -
3D-Fingerprint Augment based on Super-Resolution for Indoor 3D WiFi Localization
(Chapter, 2021)Recently, 3D indoor positioning technology has attracted wide attention in smart medical treatment, intelligent robot and other application fields. Traditional 3D positioning technology requires to utilize the special-dedicated ... -
3D-Printing Technology in Construction: Results from a Survey
(Chapter, 2019)Purpose – The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector. Design/Methodology/Approach – A survey was conducted to collect professional view on ongoing innovations ... -
3W Raman Soliton Tunable between 2-2.2 µm in Tm-Doped Fiber MOPA
(Chapter, 2013)The simple and compact Tm-doped fiber MOPA generates tunable between 2-2.2 µm Raman solitons with average power up to 3W. Pulses as short as 130 fs and energy up to 38 nJ were demonstrated. -
5 W Supercontinuum Generation at 1.9-2.5 μm from a Tm-Doped All-Fiber MOPA Laser
(Chapter, 2013)We report a simple method of generating flat-top high power (5W) supercontinuum from an all-silica-fiber Tm-MOPA laser emitting in the interesting for applications 1.96-2.48 μm range (at -5 dB level), covering transparency ... -
5G Network Slice Isolation with WireGuard and Open Source MANO: A VPNaaS Proof-of-Concept
(Chapter, 2020)The fifth-generation (5G) mobile networks aim to host different types of services on the same physical infrastructure. Network slicing is considered as the key enabler for achieving this goal. Although there is some progress ... -
8.6 MHz Extended Cavity Cr:ZnS Chirped-pulse Oscillator
(Chapter, 2018)We report the first extended cavity Cr:ZnS chirped-pulse oscillator mode-locked by graphene. We demonstrate 415 mW average power at 8.6 MHz repetition rate which results in 48 nJ pulse energy. -
A 2D Experimental and Numerical Study of Moonpools With Recess
(Chapter, 2018)Moonpool resonance is investigated in a two-dimensional setting in terms of regular, forced heave motions of a model with moonpool with different rectangular-shaped recess configurations. A recess is a reduced draft zone ... -
A 2D sediment bed morphodynamics model for turbulent, non-Newtonian, particle-loaded flows
(Chapter, 2017)In petroleum drilling, cuttings transport problems, i.e. an accumulation of drilled of solids in the wellbore, are a major contributor to well downtime and have therefore been extensively researched over the years, both ... -
A 3D motion planning framework for snake robots
(Chapter, 2014)This paper presents a motion planning framework for three-dimensional body shape control of snake robots. Whereas conventional motion planning approaches define the body shape of snake robots in terms of their individual ...