Production of Iron Alloy by Direct Electrolytic Reduction Using Suspension Electrolysis in an Alkaline Electrolyte
Peer reviewed, Journal article
Published version
Permanent lenke
https://hdl.handle.net/11250/3052477Utgivelsesdato
2022Metadata
Vis full innførselSamlinger
- Institutt for materialteknologi [2498]
- Publikasjoner fra CRIStin - NTNU [37221]
Originalversjon
10.1149/1945-7111/ac9b97Sammendrag
Iron alloys were produced by suspension electrolysis in a 50 wt% NaOH–H2O electrolyte at 383 K, and Fe–Cr and Fe–Ni alloys were obtained using a suspension of Fe2O3+Cr2O3 and Fe2O3+Ni(OH)2 particles, respectively. Highly ordered columnar deposits comprising cubic Fe–Cr particles with approximately 5-micrometer-long sides were obtained on a disk cathode with a current efficiency higher than 90% at 100–300 mA・cm−2. In contrast, disordered columnar deposits of Fe–Ni particles with diameters of approximately 1.0 μm were obtained on a disk cathode with a current efficiency of approximately 50% at 200 mA・cm−2. The proposed method affords iron alloys with compositions in the stainless-steel region that depend on the electrolysis conditions, namely, the current density and Fe2O3/Cr2O3 or Fe2O3/Ni(OH)2 content ratio.