Vis enkel innførsel

dc.contributor.authorMa, Jianyu
dc.contributor.authorMahmoodinia, Mehdi
dc.contributor.authorRout, Kumar Ranjan
dc.contributor.authorBlekkan, Edd Anders
dc.description.abstractThe impact of operating parameters on H2S capture from a syngas mixture by a Mo-promoted Mn-based high-temperature sorbent was investigated. The parameters investigated included temperature, space velocity, H2S concentration in the feed gas, and steam content. The H2S and SO2 concentrations in the gas after passing over a bed of the sorbent were analyzed and compared with thermodynamic calculations. The results confirmed that low temperature, low space velocity, low H2S concentration, and a dry feed were favorable for achieving a low residual concentration of sulfur compounds in the effluent gas. The sorbent was able to reduce the residual H2S concentration to below 1 ppm under all tested conditions. However, the unavoidable steam content in the gas phase had a significant adverse effect on sulfur removal from the gas. An empirical model, containing the three variables, i.e., temperature, space velocity, and H2S concentration in the feed, was developed and can be used to predict the effluent H2S residual concentration after treatment by the 15Mn8Mo sorbent.en_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.titleThe Impact of Operating Parameters on the Gas-Phase Sulfur Concentration after High Temperature Sulfur Sorption on a Supported Mo-Mn Sorbenten_US
dc.typeJournal articleen_US
dc.typePeer reviewed

Tilhørende fil(er)


Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal