Blar i Publikasjoner fra CRIStin - NTNU på tidsskrift "Materials"
Viser treff 1-20 av 120
-
3D printed thermoelectric polyurethane/multiwalled carbon nanotube nanocomposites: A novel approach towards the fabrication of flexible and stretchable organic thermoelectrics
(Peer reviewed; Journal article, 2020)Three-dimensional (3D) printing of thermoelectric polymer nanocomposites is reported for the first time employing flexible, stretchable and electrically conductive 3D printable thermoplastic polyurethane (TPU)/multiwalled ... -
A novel approach for assessing the fatigue behavior of PEEK in a physiologically relevant environment
(Journal article; Peer reviewed, 2018)In recent years, the need of surgical procedures has continuously increased and, therefore, researchers and clinicians are broadly focusing on the development of new biocompatible materials. Among them, polyetheretherketone ... -
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines
(Journal article; Peer reviewed, 2017)Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, ... -
Advanced simulation of removing chromium from a synthetic wastewater by rhamnolipidic bioflotation using hybrid neural networks with metaheuristic algorithms
(Peer reviewed; Journal article, 2021)This work aims at presenting an advanced simulation approach for a novel rhamnolipidic-based bioflotation process to remove chromium from wastewater. For this purpose, the significance of key influential operating variables ... -
Advances in Permanent Deformation Modeling of Asphalt Concrete—A Review
(Journal article; Peer reviewed, 2022)Permanent deformation is one of the dominant asphalt concrete damages. Significant progress has been made to realistically predict the damage. In the last decade, the mechanistic approach has been the focus of research, ... -
Aluminothermic reduction of manganese oxide from selected mno-containing slags
(Peer reviewed; Journal article, 2021)The aluminothermic reduction process of manganese oxide from different slags by aluminum was investigated using pure Al and two types of industrial Al dross. Two types of MnO-containing slags were used: a synthetic highly ... -
Antibacterial Activity and Cell Responses of Vancomycin-Loaded Alginate Coating on ZSM-5 Scaffold for Bone Tissue Engineering Applications
(Peer reviewed; Journal article, 2022)Despite the significant advancement in bone tissue engineering, it is still challenging to find a desired scaffold with suitable mechanical and biological properties, efficient bone formation in the defect area, and ... -
Attaining High Functional Performance in Biodegradable Mg-Alloys: An Overview of Challenges and Prospects for the Mg-Zn-Ca System
(Peer reviewed; Journal article, 2023)This article presents a concise overview of modern achievements and existing knowledge gaps in the area of biodegradable magnesium alloys. Hundreds of Mg-based alloys have been proposed as candidates for temporary implants, ... -
Biocomposite Coatings Doped with Magnesium and Zinc Ions in Chitosan Matrix for Antimicrobial Applications
(Peer reviewed; Journal article, 2023)Hydroxyapatite doped with magnesium and zinc in chitosan matrix biocomposites have great potential for applications in space technology, aerospace, as well as in the biomedical field, as a result of coatings with multifunctional ... -
Bondline thickness effects on damage tolerance of adhesive joints subjected to localized impact damages: Application to leading edge of wind turbine blades
(Peer reviewed; Journal article, 2021)The leading edges of wind turbine blades are adhesively bonded composite sections that are susceptible to impact loads during offshore installation. The impact loads can cause localized damages at the leading edges that ... -
Calibration Method for monitoring hygro-mechanical reactions of coated and uncoated pine and oak wood by Acoustic Emission Non-Destructive Testing
(Peer reviewed; Journal article, 2020)The main issue of wood is its sensitivity to Relative Humidity (RH) variations, affecting its dimensional stability, and thus leading to crack formations and propagations. In situ structural health monitoring campaigns ... -
Carbon nanotubes (CNTs)-reinforced magnesium-based matrix composites: A comprehensive review
(Peer reviewed; Journal article, 2020)In recent years considerable attention has been attracted to magnesium because of its light weight, high specific strength, and ease of recycling. Because of the growing demand for lightweight materials in aerospace, medical ... -
Comparative Life Cycle Assessment of a Novel Al-Ion and a Li-Ion Battery for Stationary Applications
(Journal article; Peer reviewed, 2019)The foreseen high penetration of fluctuant renewable energy sources, such as wind andsolar, will cause an increased need for batteries to store the energy produced and not instantaneouslyconsumed. Due to the high production ... -
Comparative study of thermal-oxidative aging and salt solution aging on bitumen performance
(Journal article; Peer reviewed, 2021) -
Compositional Engineering of a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) Nanocomposite Cathodes for Protonic Ceramic Fuel Cells
(Journal article; Peer reviewed, 2019)Compositionally engineered a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) (LBZ) nanocomposite cathodes were prepared by oxidation driven in situ exsolution of a single-phase material ... -
Controlling Phase Purity and Texture of K0.5Na0.5NbO3 Thin Films by Aqueous Chemical Solution Deposition
(Journal article; Peer reviewed, 2019)Aqueous chemical solution deposition (CSD) of lead-free ferroelectric K0.5Na0.5NbO3 (KNN) thin films has a great potential for cost-effective and environmentally friendly components in microelectronics. Phase purity of KNN ... -
Corrosion and Microstructural Investigation on Additively Manufactured 316L Stainless Steel: Experimental and Statistical Approach
(Peer reviewed; Journal article, 2022)The use of metal additive manufacturing (AM) has strongly increased in the industry during the last years. More specifically, selective laser melting (SLM) is one of the most used techniques due to its numerous advantages ... -
Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding
(Peer reviewed; Journal article, 2022)In this study, corrosion and wear behavior of three kinds of coatings by two processes, namely, plasma electrolytic oxidation (PEO) coatings (Ti/TiO2), gas nitriding coating (Ti/TiN), and the duplex coating (Ti/TiO2-N) by ... -
Determining the Vapour Resistance of Breather Membrane Adhesive Joints
(Peer reviewed; Journal article, 2022)Due to increasingly stringent requirements, tapes and adhesive joints are a commonly used method to ensure tightness and energy efficiency in modern building envelopes. Previous studies have researched and tested properties ... -
Diffusion mechanism of rejuvenator and its effects on the physical and rheological performance of aged asphalt binder
(Peer reviewed; Journal article, 2019)Using rejuvenator to improve the asphalt pavement service state has become an increasing concern in recent years. This study mainly focuses on the diffusion analysis between rejuvenator and aged asphalt, and further ...