Blar i Øvrige samlinger på tittel
Viser treff 19424-19443 av 39054
-
Investigation of slag and condensate from the charge top in a FeSi75 furnace
(Chapter, 2023)Metallurgical silicon/ferrosilicon is produced industrially in submerged arc furnaces by carbothermic reduction of quartz. In addition to raw materials, oxide impurities are present in the furnace. Accumulated slag is ... -
Investigation of Sodium Sulfate Additions into Cryolite-Alumina Melts
(Journal article, 2016)In the Hall-Héroult process, sulfur impurities may not only emit harmful gases but also reduce current efficiency. To better understand this process, the behaviour of sulfur compounds in a cryolite-alumina melt at 1253 K ... -
Investigation of Solar Photovoltaic-Thermal (PVT) and Solar Photovoltaic (PV) Performance: A Case Study in Ghana
(Peer reviewed; Journal article, 2020)The main objective of this paper is to experimentally assess the real-life outdoor performance of a photovoltaic-thermal (PVT) module against a conventional photovoltaic (PV) system in a hot humid tropical climate in Ghana. ... -
Investigation of Spent Refractory Lining in an Anode Baking Furnace
(Journal article; Peer reviewed, 2017)The refractory lining in anode baking furnaces is exposed to harsh chemical environment and thermal cycling. Spent refractory lining from an anode baking furnace after 4000 days in operation was investigated. Variation in ... -
Investigation of Spin Coating Cerium-Doped Hydroxyapatite Thin Films with Antifungal Properties
(Peer reviewed; Journal article, 2021)In this study, the cerium-doped hydroxyapatite (Ca10−xCex(PO4)6(OH)2 with xCe = 0.1, 10Ce-HAp) coatings obtained by the spin coating method were presented for the first time. The stability of the 10Ce-HAp suspension particles ... -
An investigation of the anisotropic properties of heat-treated maraging steel grade 300 processed by laser powder bed fusion
(Peer reviewed; Journal article, 2021)In order to explore the possibilities enabled by laser beam powder bed fusion of metals (PBF-LB/M), reliable material models are necessary to optimize designs with respect to weight and stiffness. Due to the unique processing ... -
Investigation of the change in soil fabric during cone penetration in silt using 2D measurements
(Journal article; Peer reviewed, 2017)Interpretation of CPTU testing in silt is non-trivial because of the partially drained conditions that are likely to occur during penetration. A better understanding of the pore pressure generation/dissipation is needed ... -
Investigation of the effect of clinically relevant interferents on glucose monitoring using near‐infrared spectroscopy
(Peer reviewed; Journal article, 2021)Near infrared spectroscopy (NIR) is a promising technique for continuous blood glucose monitoring for diabetic patients. Four interferents, at physiological concentrations, were introduced to study how the glucose predictions ... -
Investigation of the Effect of Operating Conditions on Reliability of DC-link Capacitors in Microgrids
(Chapter, 2020)This paper considers a microgrid system where the impact of different non-ideal operating conditions on the reliability of the DC-link capacitor in three phase inverter systems is investigated. Rather than focusing on the ... -
Investigation of the effects of ship inducedwaves on the littoral zone with field measurements and CFD modeling
(Peer reviewed; Journal article, 2016)Waves induced by ship movement might be harmful for the habitat in the littoral zone of rivers due to the temporally increasing bed shear stress, the high-energy breaking waves and the consequently related detachment of ... -
Investigation of the effects of specific solar storming events on GNSS navigation systems
(Journal article; Peer reviewed, 2011)Global positioning system (GPS) satellites operate at 1.2 and 1.5 GHz. The GPS signals travel through the atmosphere and are affected by space weather in the same way as other technological systems in space and on the ... -
Investigation of the genetic diversity of domestic Capra hircus breeds reared within an early goat domestication area in Iran
(Journal article; Peer reviewed, 2014)Abstract Background Iran is an area of particular interest for investigating goat diversity. Archaeological remains indicate early goat domestication (about 10 000 years ago) in the Iranian Zagros Mountains as well as in ... -
Investigation of the Hydroelectric Development Potential of Nonpowered Dams: A Case Study of the Buyuk Menderes River Basin
(Peer reviewed; Journal article, 2023)The adaptation of nonpowered dams (NPDs) to dams with hydroelectric generation units requires only minor interventions compared with the construction of a completely new dam and power plant. Thus, it is both more economical ... -
Investigation of the impact of wakes and stratification on the performance of an onshore wind farm
(Journal article; Peer reviewed, 2015)This work investigates the effects of wakes and stratification on the performance of turbines operating in the Bessaker wind farm. The wind farm is located in a highly complex terrain. Most dominant wind directions recorded ... -
The investigation of the influence of thermal plume and breathing on sleeping microenvironment
(Peer reviewed; Journal article, 2021)Most of humans’ lifetime was spent indoor, especially in bedroom. Thus, understanding the characteristics of the sleep microenvironment is a prerequisite for better control and improvement of our sleeping environment. This ... -
Investigation of the long-term sustainability of changes in appetite after weight loss
(Journal article; Peer reviewed, 2018)Background/Objective Diet-induced weight loss (WL) leads to a compensatory increase in appetite and changes in the plasma concentration of appetite-regulating hormones are likely to play a role. Whether these changes are ... -
Investigation of the microstructure evolution and deformation mechanisms of a Mg-Zn-Zr-RE twin-roll-cast magnesium sheet by in-situ experimental techniques
(Journal article; Peer reviewed, 2018)Twin roll casting (TRC), with a relatively fast solidification rate, is an excellent production method with promising potential for producing wrought semi or final Mg alloy products that can often suffer from poor formability. ... -
Investigation of the Model Structure for Low-Order Grey-Box Modelling of Residential Buildings
(Chapter, 2019)Model Predictive Control (MPC) is a key technology to activate the building energy flexibility. A reliable control-based model should be developed for each specific building. The structure of grey-box models is usually ... -
Investigation of the Numerical Methodology of a Model Wind Turbine Simulation
(Journal article; Peer reviewed, 2018)The present work aims to investigate different methodologies for the numerical simulation of an upwind three-bladed wind turbine; which is supposed to be a base model to simulate icing in cold climate windmills. That is a ... -
Investigation of the products of the dolomite reaction in Portland cement pastes
(Chapter; Peer reviewed, 2017)The formation of potentially deleterious reaction products from the reaction of dolomite fines in Portland cement pastes was investigated. It was shown that the reaction of dolomite fines did not follow the commonly accepted ...