Blar i Institutt for materialteknologi på forfatter "Einarsrud, Mari-Ann"

Viser treff 1-20 av 192

    • 134Ba diffusion in polycrystalline BaMO3 (M = Ti, Zr, Ce) 

      Sazinas, Rokas; Sakaguchi, Isao; Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2017)
      Cation diffusion in functional oxide materials is of fundamental interest, particularly in relation to interdiffusion of cations in thin film heterostructures and chemical stability of materials in high temperature ...

    • 1D oxide nanostructures from chemical solutions 

      Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2014)
      Nanotechnology has motivated a tremendous effort to grow free standing or hierarchical nanomaterials such as nanowires and nanorods. Bottom-up approaches based on chemistry are an important approach to nanomaterials, and ...

    • 3D aligned-carbon-nanotubes@Li2FeSiO4 arrays as high rate capability cathodes for Li-ion batteries 

      Zhou, Haitao; Lou, Fengliu; Vullum, Per Erik; Einarsrud, Mari-Ann; Chen, De; Vullum-Bruer, Fride (Journal article; Peer reviewed, 2013-09-27)
      3D aligned-carbon-nanotubes (ACNTs)@Li2FeSiO4 nanocomposite arrays on Al foil were developed as cathode materials for Li-ion batteries. The ACNTs were grown directly on an Al foil by a chemical vapor deposition method to ...

    • 96Zr Tracer Diffusion in AZro3 (A = Ca, Sr, Ba) 

      Sazinas, Rokas; Sakaguchi, Isao; Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2018)
      Cation tracer diffusion in polycrystalline AZrO3 (A = Ca, Sr, Ba) perovskites was studied at 1300–1500 °C in air using the stable isotope 96Zr. Thin films of 96ZrO2 were deposited on polished ceramic pellets by drop casting ...

    • A comprehensive study on improved power materials for high-temperature thermoelectric generators 

      Bittner, Michael; Kanas, Nikola; Hinterding, Richard; Steinbach, Frank; Räthel, Jan; Schrade, Mattias; Wiik, Kjell; Einarsrud, Mari-Ann; Feldhoff, Armin (Journal article; Peer reviewed, 2019)
      Dense Ca3Co4O9-NaxCoO2-Bi2Ca2Co2O9 (CCO-NCO-BCCO) nanocomposites were produced from sol-gel derived Ca2.25Na0.3Bi0.35Tb0.1Co4O9 powder by four methods: Hot-pressing (HP), spark plasma sintering (SPS) and pressureless ...

    • A study on commercial SiC-powders sintered by hot pressing 

      Mogstad, Kent (Master thesis, 2016)
      Hot-pressing of a commercial silicon carbide powder was performed with 0, 5 and 10wt% added hexagonal boron nitride. Density, microstructural and compositional development has been studied ex situ with different holding ...

    • Al-Doped LLZO Synthesized via Spray Pyrolysis of Carbon-Free Nitrate Precursors 

      Klokkehaug, Margrethe (Master thesis, 2023)
      Faststoff elektrolytter blir for tiden undersøkt for bruk i Li-ion batterier som en erstatning for de organiske væskebaserte elektrolyttene som brukes i dagens batterier. Dette vil forbedre batterisikkerheten, kjemisk og ...

    • All oxide thermoelectric device based on Ca0.931Mn0.98Ta0.02O3-δ-Ca3Co4O9 pn-junction 

      Kolobekken, Sara Hizon (Master thesis, 2017)
      Metal oxides are promising thermoelectric (TE) material candidates for TE modules operational in a range of 300-1200 K in air. In this work a TE oxide module was fabricated by co-sintering the p-type material Ca3Co4O9 ...

    • All-oxide thermoelectric module with in situ formed non-rectifying complex p-p-n junction and transverse thermoelectric effect 

      Kanas, Nikola; Bittner, Michael; Desissa, Temesgen Debelo; Singh, Sathya Prakash; Norby, Truls Eivind; Feldhoff, Armin; Grande, Tor; Wiik, Kjell; Einarsrud, Mari-Ann (Journal article; Peer reviewed, 2018)
      All-oxide thermoelectric modules for energy harvesting are attractive due to high temperature stability, low cost, and the potential to use non-scarce and non-toxic elements. Thermoelectric modules are mostly fabricated ...

    • Anelastic properties of La0.6Sr0.4Co1−yFeyO3-δ at high temperatures 

      Kimura, Y; Tolchard, Julian R; Einarsrud, Mari-Ann; Grande, Tor; Amezawa, K; Fukuhara, M; Hashimoto, Shin-ichi; Kawada, Tatsuya (Journal article; Peer reviewed, 2014)
      The dynamic amplitude dependence of the Young's modulus and the internal friction of La0.6Sr0.4Co0.2Fe0.8O3 −δ (LSCF6428) at high temperatures were evaluated by resonance measurements. At the temperatures from room temperature ...

    • Anisotropic in-plane dielectric and ferroelectric properties of tensile-strained BaTiO3 films with three different crystallographic orientations 

      Ræder, Trygve Magnus; Holstad, Theodor Secanell; Nylund, Inger-Emma; Glaum, Julia; Einarsrud, Mari-Ann; Meier, Dennis; Grande, Tor (Peer reviewed; Journal article, 2021)
      Ferroelectric properties of films can be tailored by strain engineering, but a wider space for property engineering can be opened by including crystal anisotropy. Here, we demonstrate a huge anisotropy in the dielectric ...

    • Aqueous tape casting and mechanical properties of La2NiO4 dense membranes 

      Chen, Xinzhi; Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2015)
      An environmentally friendly aqueous tape casting process for the fabrication of La2NiO4+δ membranes was developed using fine powders synthesized by spray pyrolysis. Green tapes with a thickness of 30–300 μm were obtained ...

    • Aspects related to the thermal and mechanical stability of oxygen permeable membranes 

      Sahini, Mtabazi Geofrey (Doctoral theses at NTNU;2017:59, Doctoral thesis, 2017)
      Fossil fuels causes CO2 emission to the atmosphere after combustion, and to minimize CO2 emission carbon capture and sequestration (CCS) technologies are under development. CCS involves CO2 capture, compression, transport ...

    • Asymmetric supported dense lanthanum tungstate membranes 

      Gil, V; Gurauskis, Jonas; Einarsrud, Mari-Ann (Journal article; Peer reviewed, 2014)
      In this work, a colloidal processing route for dense asymmetric La28-xW4+xO54+3x/2 membranes for hydrogen gas separation applications was established. Dip coating process conditions were optimized to obtain ≈20 m thick ...

    • Atmosphere controlled conductivity and Maxwell-Wagner relaxation in Bi0.5K0.5TiO3 – BiFeO3 ceramics 

      Morozov, Maxim; Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2014)
      Here, we report on a giant dielectric relaxation in (1 x)Bi0.5K0.5TiO3—xBiFeO3 ceramics below 300 C, which becomes more pronounced with increasing BiFeO3 content. The relaxation was shown to be of Maxwell-Wagner type ...

    • Barium titanate-based bilayer functional coatings on Ti alloy biomedical implants 

      Poon, Kara Kamen; Schafföner, Stefan; Einarsrud, Mari-Ann; Glaum, Julia (Peer reviewed; Journal article, 2021)
      Piezoelectric coatings have the ability to functionalise conventional structural materials into responsive devices. Today, piezoelectric coatings have been applied to both rigid and flexible substrates for sensing, actuating, ...

    • Biaxial strength and slow crack growth in porous alumina with silica sintering aid 

      Bakken, Astrid; Wagner, Susanne; Hoffmann, Michael; Einarsrud, Mari-Ann; Grande, Tor; Thorstensen, Bernt (Journal article, 2018)
      Biaxial strength, fracture toughness and subcritical crack growth are reported for coarse grained porous alumina ceramics. The materials were prepared with a varying amount of a silica sintering aid, which resulted in the ...

    • Biocompatibility of (Ba,Ca)(Zr,Ti)O3 piezoelectric ceramics for bone replacement materials 

      Poon, Kara; Wurm, Matthias C.; Evans, Donald; Einarsrud, Mari-Ann; Lutz, Rainer; Glaum, Julia (Journal article; Peer reviewed, 2019)
      Total joint replacement implants are generally designed to physically mimic the biological environment to ensure compatibility with the host tissue. However, implant instability exposes patients to long recovery periods, ...

    • C-TiB2 Composite Inert Cathode Material by Spark Plasma Sintering 

      Håberg, Audun (Master thesis, 2018)
      TiB2 has been considered a potential inert, wettable cathode material for aluminum reduction cells for a long time. An important characteristic of TiB2 as a cathode material, is its excellent wetting properties towards ...

    • Cation Disorder in Ferroelectric Ba4M2Nb10O30 (M = Na, K, and Rb)Tetragonal Tungsten Bronzes 

      Nylund, Inger-Emma; Løndal, Nora Statle; Walker, Julian; Vullum, Per Erik; Einarsrud, Mari-Ann; Grande, Tor (Journal article; Peer reviewed, 2022)