Blar i Institutt for materialteknologi på emneord "VDP::Materials science and engineering: 520"
Viser treff 1-8 av 8
-
Beneficiation of fluxed titaniferous slag to a marketable titania product using the modified upgraded slag process
(Peer reviewed; Journal article, 2022)Smelting production of a limestone-fluxed titaniferous slag with low MgO content for subsequent beneficiation using the modified Upgraded Slag (UGS) process was investigated, with the aim of producing a marketable titania ... -
Chemical redistribution and change in crystal lattice parameters during stress relaxation annealing of the AD730 TM superalloy
(Peer reviewed; Journal article, 2022)The present study aims to understand the underlying mechanisms of macroscopic contraction that occurs in γ/γ′ nickel based superalloys submitted to isothermal annealing and resulting in stress relaxation retardation. Samples ... -
Compositional Engineering of a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) Nanocomposite Cathodes for Protonic Ceramic Fuel Cells
(Journal article; Peer reviewed, 2019)Compositionally engineered a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) (LBZ) nanocomposite cathodes were prepared by oxidation driven in situ exsolution of a single-phase material ... -
Depth profiling at a steel-aluminum interface using slow-flow direct current glow discharge mass spectrometry
(Journal article; Peer reviewed, 2021) -
Effect of (5%) CO2 on the Oxidation Rate During Cooling of Industrial Aluminum White Dross
(Peer reviewed; Journal article, 2023)Aluminum (Al) white dross is classified as hazardous waste and originates from the primary production of Al as a result of molten metal oxidation at an industrial scale. As the produced dross reduces the annual metallic ... -
Study of the Physical Behaviour and the Carbothermal Reduction of Self-Reducing Briquettes Developed with Iron Ore Fines, Charcoal and Silica Fume Residues
(Peer reviewed; Journal article, 2022)Self-reducing briquettes made with waste (silica fume, iron ore and charcoal fines) from the FeSi75 industry were studied. The objective was to determine if these briquettes could be used as a complementary load in submerged ... -
The Use of Eutectic Fe-Si-B Alloy as a Phase Change Material in Thermal Energy Storage Systems
(Journal article; Peer reviewed, 2019)Fe-26.38Si-9.35B eutectic alloy is proposed as a phase change material (PCM) as it exhibits high latent heat, high thermal conductivity, moderate melting point, and low cost. For successful implementation of it in the ... -
Weld thermal simulation of API 5CT L80 grade steel
(Peer reviewed; Journal article, 2021)The microstructure and mechanical properties of an API 5CT L80 casing grade steel (0.24C 0,4Si 1.4Mn CrNiCu) have been studied after performing weld thermal simulations (with and without subsequent tempering) applying a ...