Blar i Institutt for materialteknologi på utgivelsesdato
Viser treff 1-20 av 1645
-
Filtration of aluminium : theory, mechanisms, and experiments
(Dr. ingeniøravhandling; 1990:88, Doctoral thesis, 1990) -
Iron ore concentrates : oxidation and reduction
(Dr. ingeniøravhandling, 0809-103X; 1992:96, Doctoral thesis, 1992) -
Transmission through an Electrochromic Window based on Polyaniline, Tungsten Oxide and a Solid Polymer Electrolyte
(Journal article; Peer reviewed, 1992)An electrochromic window was fabricated by combining polyaniline and tungsten oxide with a solid polymer electrolyte binding the two electrochromic materials together. Polyaniline and tungsten oxide were deposited ... -
Transmission Spectra of an Electrochromic Window based on Polyaniline, Tungsten Oxide and a Solid Polymer Electrolyte
(Journal article; Peer reviewed, 1992)An electrochromic window was fabricated by combining polyaniline and tungsten oxide with a solid polymer electrolyte binding the two electrochromic materials together. Polyaniline and tungsten oxide were deposited ... -
Transmission through an Electrochromic Window based on Polyaniline, Tungsten Oxide and a Solid Polymer Electrolyte
(Journal article; Peer reviewed, 1992)An electrochromic window was fabricated by combining polyaniline and tungsten oxide with a solid polymer electrolyte binding the two electrochromic materials together. Polyaniline and tungsten oxide were deposited ... -
Transmission Spectra of an Electrochromic Window based on Polyaniline, Prussian Blue and Tungsten Oxide
(Journal article; Peer reviewed, 1993)The demand for energy savings in buildings will increase in the coming years, as the world's attention is drawn towards environmental aspects and energy economizing. Windows which are able to dynamically control the sun ... -
Dynamic Light Modulation in an Electrochromic Window consisting of Polyaniline, Tungsten Oxide and a Solid Polymer Electrolyte
(Journal article; Peer reviewed, 1993)The electrochemical and optical properties of an electrochromic window consisting of the two complementary electrochromic materials, polyaniline (PANI) and tungsten oxide (WO3), have been investigated. Both PANI and WO3 ... -
Transmission Spectra of an Electrochromic Window consisting of Polyaniline, Prussian Blue and Tungsten Oxide
(Journal article; Peer reviewed, 1993)Energy savings in buildings can be achieved by using electrochromic windows which change colour by the application of an external voltage. We have studied an electrochromic window by combining polyaniline (PANI), prussian ... -
Removal of C and SiC from Si and FeSi during ladle refining and solidification
(Dr.ingeniøravhandling, 0809-103X; 1997:11, Doctoral thesis, 1997) -
A process model for friction stir welding of age hardening aluminium alloys
(Dr. ingeniøravhandling, 0809-103X; 1999:76, Doctoral thesis, 1999) -
Performance of an electrochromic window based on polyaniline, prussian blue and tungsten oxide
(Journal article; Peer reviewed, 1999)In our laboratory various electrochromic windows (ECWs) have been investigated using mainly tungsten oxide (WO3), polyaniline (PANI) and prussian blue (PB) as electrochromic materials in combination with poly(2-acrylamid ... -
Correlation between light absorption and electric charge in solid state electrochromic windows
(Journal article; Peer reviewed, 1999)Electrochromic windows based on different combinations of the electro chromic materials polyaniline (PANI), Prussian Blue (PB) and tungsten oxide (WO3), with the solid state polymer electrolyte poly(2 acrylam ido 2 methyl ... -
Microstructures and Properties of Aluminium-Magnesium Alloys with Additions of Manganese, Zirconium and Scandium
(Dr. ingeniøravhandling, 0809-103X; 2000:12, Doctoral thesis, 2000)The present work reports on the effect of Mn-, Zr- and Sc-additions upon hot deformation properties, recrystallization properties and mechanical properties for different temper conditions of Al-Mg alloys. It can be stated ... -
Remelting of Aluminium by Continuous Submersion of Rolled Scrap
(Dr. ingeniøravhandling, 0809-103X; 2000:127, Doctoral thesis, 2000)When remelting aluminium scrap, metal losses due to dross generation is a common problem. Reduction of these losses will give substantial economic and environmental benefits. Dross is generated when aluminium metal oxidizes ... -
Flow and Heat Transfer in a Radially Spreading Liquid Metal Jet Related to Casting of Ferroalloys
(Dr. ingeniøravhandling, 0809-103X; 2000:83, Doctoral thesis, 2000)In the past more and more advanced and fine-tuned processes for steel production have resulted in increased demands for new and more costeffective ferroalloys used as constituents in the processes. Casting techniques and ... -
Behaviour of iron and titanium species in cryolite-alumina melts
(Dr.ingeniøravhandling, 0809-103X; 2000:118, Doctoral thesis, 2000)The solubility of divalent iron oxide in cryolite-based melts was studied. Both electrochemical and chemical techniques were employed. To ensure that only divalent iron was present in solution, the melt was contained in ... -
Metal hydrides for rechargeable batteries
(Dr. ingeniøravhandling, 0809-103X; 2000:30, Doctoral thesis, 2000) -
Mushy zone permeability and grain morphology in equiaxed aluminium-copper alloys
(Dr. ingeniøravhandling, 0809-103X; 2000:33, Doctoral thesis, 2000) -
Precipitation of dispersoids containing Mn and/or Cr in Al-Mg-Si-alloys
(Dr. ingeniøravhandling; 2000:53, Doctoral thesis, 2000) -
Deposition and reduction of manganese dioxide on alternative anode materials in zinc electrowinning
(Dr. ingeniøravhandling, 0809-103X; 2000:19, Doctoral thesis, 2000)