Browsing Institutt for kjemisk prosessteknologi by Title
Now showing items 1743-1757 of 1757
-
Water as key to activity and selectivity in Co Fischer-Tropsch synthesis: γ-alumina based structure-performance relationships
(Journal article; Peer reviewed, 2018)Thirteen γ-alumina supports with different pore sizes and pore size distributions have been impregnated with cobalt and rhenium. The catalysts were tested for Fischer-Tropsch synthesis (FTS) under dry and enhanced water ... -
The water assisted vinylene mechanism for cobalt Fischer-Tropsch synthesis assessed by multi-catalyst modelling of kinetics and deactivation
(Peer reviewed; Journal article, 2022)The paper describes development of a mechanism and a consistent rate expression for Fischer-Tropsch (FT) synthesis over cobalt-based catalysts. The developed mechanism relies on a two-step hydrogen assisted activation of ... -
Water-lean solvents for biogas upgrading
(Doctoral theses at NTNU;2020:298, Doctoral thesis, 2020)Biogas upgrading consists in the removal of CO2 from biogas, a process which produces a highly purified biomethane stream. As such, biogas upgrading has a double positive impact when considering climate change mitigation ... -
Water–Gas Shift Activity of Pt Catalysts Prepared by Different Methods
(Peer reviewed; Journal article, 2020)Platinum supported on ceria and zirconia was prepared through different preparation methods: Coprecipitation (CP), spray drying (SD), and flame spray pyrolysis (FSP). The catalysts were characterized by XRD, TPR, N2 ... -
Wax-Inhibitor Interactions Studied by Isothermal Titration Calorimetry and Effect of Wax Inhibitor on Wax Crystallization
(Journal article; Peer reviewed, 2017)Isothermal titration calorimetry is applied to investigate the interactions of polymeric pour-point depressants (PPDs) or asphaltenes with macrocrystalline wax in a model oil system. This represents a novel approach to ... -
Wet Drilled Cuttings Bed Rheology
(Peer reviewed; Journal article, 2021)The cuttings transport efficiency of various drilling fluids has been studied in several approaches. This is an important aspect, since hole cleaning is often a bottleneck in well construction. The studies so far have ... -
Wet-granular rheology to measure cuttings-bed strength
(Journal article; Peer reviewed, 2021) -
Wettability effect on oil recovery using rock-structured microfluidics
(Peer reviewed; Journal article, 2022)Surface wettability has a crucial impact on drop splashing, emulsion dynamics, slip flow for drag reduction, fluid–fluid displacement, and various microfluidic applications. Targeting enhanced oil recovery (EOR) applications, ... -
Wood-based nanocellulose and bioactive glass modified gelatin-alginate bioinks for 3D bioprinting of bone cells
(Peer reviewed; Journal article, 2019)A challenge in the extrusion-based bioprinting is to find a bioink with optimal biological and physicochemical properties. The aim of this study was to evaluate the influence of wood-based cellulose nanofibrils (CNF) and ... -
X-ray absorption, X-ray diffraction and electron microscopy study of spent cobalt based catalyst in semi-commercial scale Fischer-Tropsch synthesis
(Peer reviewed; Journal article, 2014)Calcined, reduced and spent Co-Re/γ-Al2O3 catalysts for Fischer–Tropsch synthesis (FTS) were characterized and compared. Co-K-edge and Re-LIII-edge X-ray absorption near edge structure (XANES), X-ray powder diffraction ... -
Yield-increasing additives in kraft pulping: Effect on carbohydrate retention, composition and handsheet properties
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:137, Doctoral thesis, 2008) -
Yttrium promoted Ni-based double-layered hydroxides for dry methane reforming
(Journal article; Peer reviewed, 2018)Yttrium modified Ni-based double-layered hydroxides were tested as novel catalysts in dry methane reforming. The catalysts were characterized by XRF, BET analysis, XRD, TPR-H2, TPD-CO2, TGA/DSC-MS, H2 chemisorption and ... -
Zirconia-Supported Catalysts for Oxidation of NO to NO2 in the Production of Nitric Acid
(Master thesis, 2021)Salpetersyre er et viktig kjemisk produkt som hovedsakelig blir brukt til å produsere kunstgjødsel av nitrater. Den industrielle prosessen for framstilling av salpetersyre foregår i tre hovedtrinn, kald Ostwaldprosessen. ... -
ZnO-Carbon-Nanotube Composite Supported Nickel Catalysts for Selective Conversion of Cellulose into Vicinal Diols
(Journal article; Peer reviewed, 2015)A ZnO-nanolayer-coated carbon nanotube (CNT) composite (ZnO–CNT) was employed as a support to immobilise Ni catalysts. Well-mixed oxides, formed as a result of enhanced interfaces between the two oxides on CNTs, resulted ... -
α-alumina as catalyst support in Co Fischer-Tropsch synthesis and the effect of added water; encompassing transient effects
(Peer reviewed; Journal article, 2019)Three catalyst supports containing from 84 to 100% α-alumina prepared by heat treatment of γ-alumina have been impregnated with cobalt and rhenium. The catalysts were tested for Fischer-Tropsch synthesis (FTS) under dry ...