Fakultet for ingeniørvitenskap (uspesifisert): Nye registreringer
Viser treff 21-40 av 126
-
On State of Damage and Plasticity in pressurized layered Composite Tubes
(Dr. ingeniøravhandling, 0809-103X; 2003:10, Doctoral thesis, 2003)A method has been developed for the prediction of successive failure due to transverse cracking in wound composite layers and plastic deformation in isotropic layers of thick walled layered composite tubes. The model can ... -
A Study of Load Responses towards the Pavement Edge
(Dr.ingeniøravhandling, 0809-103X; 2001:118, Doctoral thesis, 2002)A major part of the national and county road network in Norway consists of two-lane roads with relatively narrow shoulders. The width of the roadway is limited, forcing heavy trucks to drive close to the pavement edge. ... -
Design, Operation and Control Modelling of SOFC/GT Hybrid Systems
(Doktoravhandlinger ved NTNU, 1503-8181; 2006:28, Doctoral thesis, 2006)This thesis focuses on modelling-based design, operation and control of solid oxide fuel cell (SOFC) and gas turbine (GT) hybrid systems. Fuel cells are a promising approach to high-efficiency power generation, as they ... -
Structural Behaviour of Post Tensioned Concrete Structures: Flat Slab. Slabs on Ground
(Dr. ingeniøravhandling, 0809-103X; 2001:52, Doctoral thesis, 2001)In this investigation strength and structural behaviour of prestressed concrete is studied with one full scale test of one flat slab, 16000 mm x 19000 mm, and three slabs on ground each 4000 mm x 4000 mm with thickness 150 ... -
Internal Tides and the Spread of River Plumes in the Trondheim Fjord
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:56, Doctoral thesis, 2004)The Trondheim Fjord receives a substantial amount of freshwater during the year, with a mean runoff of 725 m3s-1 and a spring flood maximum of up to 6430 m3s-1. How this freshwater spreads and mixes with the ambient presents ... -
An alternative perspective on the role of applications of ICT systems for logistics
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:29, Doctoral thesis, 2004)Ever since the 1950s, manufacturing enterprises have been using computers to support the flow of materials throughout their business units. Improving logistics performance through applications of ICT4 systems has never ... -
Freeze-Thaw Resistance of Concrete: Effect of: Curing Conditions, Moisture Exchange and Materials
(Dr. ingeniøravhandling, 0809-103X; 2001:4, Doctoral thesis, 2001)Research on freeze-thaw resistance of concrete in general and on curing and moisture conditions in particular is motivated from an economic and product sustainability point of view. Specifically, it is argued for the ... -
Platform Assessment Matrix (PAMatrix): A Method to Support Decision Making on Product Platforms
(Doktoravhandlinger ved NTNU, 1503-8181; 2005:39, Doctoral thesis, 2005)In the last century there have been drastic changes in the way products are developed and manufactured – manufacturing technologies have advanced and at the same time global competition has increased tremendously. For ... -
Sand Erosion in Hydraulic Machinery
(Doktoravhandlinger ved NTNU, 1503-8181; 2004:105, Doctoral thesis, 2004)The topic of this thesis is damage of hydraulic machinery due to sand erosion. This is a very broad topic in which all the aspects of design of hydraulic machinery namely material selection; mechanics of material and ... -
Probablistic Evaluation of FPSO-Tanker Collision in Tandem Offloading Operation
(Dr.ingeniøravhandling, 0809-103X; 2003:9, Doctoral thesis, 2003)Collisions between FPSO and shuttle tanker in tandem offloading operation have caused a growing concern in the North Sea. Several recent contact incidents between FPSO/FSU and shuttle tanker have clearly demonstrated a ... -
Modelling of Soot Formation and Oxidation in Turbulent Diffusion Flames
(Doktoravhandlinger ved NTNU, 1503-8181; 2005:175, Doctoral thesis, 2005)Soot and radiation play an important role when designing practical combustion devices, and great efforts have been put into developing models which describe soot formation and oxidation. The Eddy Dissipation Concept (EDC) ... -
Experimental investigation of small-scale gasification ofwoody biomass
(Dr. ingeniøravhandling, 0809-103X; 2002:40, Doctoral thesis, 2002)A small-scale stratified downdraft gasifier has been built and operated under stable conditions using wood pellets as fuel and air as gasification agent. The problems observed during the preliminary experiments have been ... -
Integrated Field Modeling
(Dr. ingeniøravhandling, 0809-103X; 2003:1, Doctoral thesis, 2003)This research project studies the feasibility of developing and applying an integrated field simulator to simulate the production performance of an entire oil or gas field. It integrates the performance of the reservoir, ... -
Eco-efficiency and Performance Strategies in Construction and Demolition Waste Recycling Systems
(Doktoravhandlinger ved NTNU, 1503-8181; 2005:22, Doctoral thesis, 2005)This thesis studies the Danish and Norwegian recycling systems for construction and demolition (C&D) waste. The architectural, Engineering and Construction (AEC) industry is a major contributor to societies waste production; ... -
No fire without smoke : prediction models for heat release and smoke production in the SBI test and the Room Corner test based on Cone Calorimeter test results
(Doktoravhandlinger ved NTNU, 1503-8181; 46, Doctoral thesis, 2002)Smoke production in fire represents a threat because fire smoke reduces visibility and because fire smoke is toxic. One way to reduce the risk of persons being overcome by smoke during evacuation is by setting requirements ... -
Innovation in Shipping by Using Scenarios
(Dr. ingeniøravhandling, 0809-103X; 2000:140, Doctoral thesis, 2000) -
Metamorphic refinement of quartz under influence of fluids during exhumation with reference to the metamorphic/metasomatic evolution observed in amphibolites: a detailed field, microtectonic and geochemical study from the Bamble sector, South Norway
(Doktoravhandlinger ved NTNU, 1503-8181; 2007:146, Doctoral thesis, 2007)Outline of the thesis This thesis is comprises three papers that are intended for journal publication. The version provided in the thesis is a bit longer than they will be at final publication. However it was the desire ... -
Thermal Fatigue in High Current Density Induction Coils
(Doktoravhandlinger ved NTNU, 1503-8181; 2012:353, Doctoral thesis, 2012) -
Permanent deformation properties of asphalt concrete mixtures
(Dr. ingeniøravhandling, 0809-103X; 2002:78, Doctoral thesis, 2002)Rutting is recognized to be the major distress mechanism in flexible pavements as a result of increase in tire pressures and axle loads. Rutting is caused by the accumulation of permanent deformation in all or some of the ... -
A study of ageing and degradation of asphalt pavements on low volume roads
(Dr. ingeniøravhandling, 0809-103X; 2000:49, Doctoral thesis, 2000)An important objective with this research work has been to get more knowledge about mix design and maintenance of low volume roads with asphalt pavements in Norway. A literature review on bitumen, filler, rheology and ...