Browsing NTNU Open by Author "Bolland, Olav"
Now showing items 41-51 of 51
-
Process Simulation of Oxy-combustion CO2 Capture in Cement Plant
Skinnemoen, Maria Magnussen (Master thesis, 2014)The objectives of this master thesis have been to model and simulate oxy-combustion CO2 capture in a cement plant. The model developed is a process simulation of the calcination process with varying degree of air in-leakage, ... -
Process simulation of SEWGS technology for applications in the steel industry: Prosess simulering av SEWGS teknologi for bruk i stålindustrien
De Winter, Jelmer (Master thesis, 2014)As part of the Dutch national program on CO2 capture (CATO-2), in particular ECN s research within the CEASAR project, this study primarily focuses on capturing CO2 from point sources in the steel industry. Central in this ... -
Prospects of using equilibrium-based column models in dynamic process simulation of post-combustion CO2 capture for coal-fired power plant
Dutta, Rohan; Nord, Lars O.; Bolland, Olav (Journal article; Peer reviewed, 2017)This paper discusses the limitations and prospects of using equilibrium-based column models for the dynamic simulation of post-combustion CO2 capture processes. Based on their features, one of three available commercial ... -
Selection and design of post-combustion CO2 capture process for 600 MW natural gas fueled thermal power plant based on operability
Dutta, Rohan; Nord, Lars O.; Bolland, Olav (Journal article, 2017)Post-combustion CO2 capture (PCC) plant for a typical 600 MW natural gas fueled thermal power plant was designed as a trade-off between operability and mitigation of the efficiency penalty. Two modified PCC plant configurations ... -
Selection of Design Parameters Based On Economic Evaluation Of Offshore Combined Cycles
Kulkarni, Ajeet (Master thesis, 2012)Abstract:As of Jan 1 2011,as per The Oil and Gas Journal (OGJ) Norway had 567 billion barrels of proven reserves most of which are located in the Norwegian continental shelf offshore, Apart from oil Norway is also a major ... -
Techno-economic analysis of combined cycle power plants integrated with chemical looping reforming and CO2 capture
Nazir, Shareq Mohd (Doctoral theses at NTNU;2018:129, Doctoral thesis, 2018)The current thesis is a part of the EU FP7 Project titled NanoSim. It focuses on techno-economic analysis of combined cycle power plants with integrated pre-combustion CO2 capture and reforming of Natural Gas (NG). The ... -
Techno-economic assessment of chemical looping reforming of natural gas for hydrogen production and power generation with integrated CO2 capture
Nazir, Shareq Mohd; Francisco Morgado, Joana; Bolland, Olav; Quinta-Ferreira, Rosa; Amini, Shahriar (Journal article; Peer reviewed, 2018)The current study presents the techno-economic analysis of the CLR-CC process. The CLR-CC process comprises of chemical looping reforming (CLR) of Natural Gas, water gas shift, CO2 capture and compression, and combined ... -
Techno-economic assessment of the novel gas switching reforming (GSR) concept for gas-fired power production with integrated CO2 capture
Nazir, Shareq Mohd; Cloete, Schalk Willem Petrus; Bolland, Olav; Amini, Shahriar (Journal article, 2018)The focus of this study is to carry out techno-economic analysis of a pre-combustion capture method in Natural Gas based power plants with a novel reactor concept, Gas Switching Reforming (GSR). This reactor concept enables ... -
Technology qualification for IGCC power plant with CO2 Capture
Baig, Yasir (Master thesis, 2011)Summary:This thesis presents the technology qualification plan for the integrated gasification combined cycle power plant (IGCC) with carbon dioxide capture based on DNV recommendations. Objectives of the thesis work were ... -
Vurdering av operasjonell tilgjengelighet av prosessanlegg for CO2-fangst
Engdal, Kristian (Master thesis, 2009)Denne oppgaven viser en metodikk for beregning av operasjonell tilgjengelighet av et aminanlegg for separasjon av CO2 fra eksosgass. Det fins foreløpig ikke anlegg som separerer CO2 fra eksosgass i en storskala sammenheng ... -
Weight and power optimization of steam bottoming cycle for offshore oil and gas installations
Nord, Lars O.; Martelli, Emanuele; Bolland, Olav (Journal article; Peer reviewed, 2014)Offshore oil and gas installations are mostly powered by simple cycle gas turbines. To increase the efficiency, a steam bottoming cycle could be added to the gas turbine. One of the keys to the implementation of combined ...