Blar i NTNU Open på forfatter "Strandhagen, Jan Ola"
-
Causes of Delivery-Time Variance in Maritime-Equipment Manufacturing Supply-Chains: An Empirical Study
Oluyisola, Olumide Emmanuel; Salmi, Tuomo Eero Olavi; Strandhagen, Jan Ola (Journal article; Peer reviewed, 2018)The overall performance of manufacturing companies has become increasingly dependent on their ability to coordinate a network of suppliers effectively. For manufacturers of customized equipment, it is even more important ... -
Comparing Offshore Support Vessel Production Times between Different Offshoring Strategies Practiced at Norwegian Shipyards
Semini, Marco; Brett, Per Olaf; Strandhagen, Jan Ola; Vatn, Jørn (Peer reviewed; Journal article, 2022)To save costs and build competitiveness, Norwegian shipyards usually offshore some of the processes required to produce a ship, especially steel-related tasks, i.e., they have them carried out in a country with lower factor ... -
Comparison of an Enterprise Resource Planning System and a Cloud based Enterprise Resource Planning System in an Aluminium Supply Chain
Øverseth, Thomas Dørum (Master thesis, 2017)In this master thesis, an investigation has been carried out on whether or not a cloud based enterprise resource planning system (CERP) is better suited for an aluminium supply chain (ASC), than the traditional enterprise ... -
The complementary effect of lean manufacturing and digitalisation on operational performance
Buer, Sven-Vegard; Semini, Marco; Strandhagen, Jan Ola; Sgarbossa, Fabio (Peer reviewed; Journal article, 2020)The most recent trend manufacturers have embraced to seek operational performance improvements is the use of a wide range of digital technologies typically associated with Industry 4.0. However, few studies have investigated ... -
Control Model for Intelligent and Demand-Driven Supply Chains
Strandhagen, Jan Ola; Dreyer, Heidi Carin; Romsdal, Anita (Chapter, 2011)Orchestrating supply chains is challenging. This chapter describes how to control a supply chain to make it truly demand-driven – based on the assumption that all relevant information is made available to all partners in ... -
Customer order decoupling point (CODP) and control principles in engineer to order manufacturing
Ji, Xiangyuan (Master thesis, 2015) -
Customer order decoupling point (CODP) and control principles in engineer to order manufacturing
Ji, Xiangyuan (Master thesis, 2015) -
Decision Support for Centralised Planning in Production Networks - A Prototype for Whitefish Processing
Frantzen, Ørjan (Master thesis, 2018)The purpose of this thesis is to uncover and demonstrate how decision support systems can support centralised production planning across multiple whitefish processing facilities. To that end, a prototype of a graphical ... -
Decision support model for implementing assistive technologies in assembly activities: a case study
Peron, Mirco; Sgarbossa, Fabio; Strandhagen, Jan Ola (Journal article, 2021)The use of assistive technologies, such as digital instructions (DIs) and collaborative robots (cobots), can improve the productivity of assembly system. However, their implementation remains arbitrary. In this study, a ... -
Decision Variables for Inbound Transportation Redesign in a Chemical Manufacturing Supply Chain
Andreassen, Ninni Kristina; Oluyisola, Olumide Emmanuel; Strandhagen, Jan Ola; Semini, Marco (Journal article; Peer reviewed, 2019)With respect to process manufacturing industries, there has been limited research on inbound transportation management in the literature. While some of the methods and strategies developed in the discrete manufacturing ... -
Deep Learning Driven Approaches for Predictive Maintenance: A Framework of Intelligent Fault Diagnosis and Prognosis in the Industry 4.0 Era
Li, Zhe (Doctoral theses at NTNU;2018:132, Doctoral thesis, 2018) -
Designing and developing smart production planning and control systems in the industry 4.0 era: a methodology and case study
Oluyisola, Olumide Emmanuel; Bhalla, Swapnil; Sgarbossa, Fabio; Strandhagen, Jan Ola (Peer reviewed; Journal article, 2021)In furtherance of emerging research within smart production planning and control (PPC), this paper prescribes a methodology for the design and development of a smart PPC system. A smart PPC system uses emerging technologies ... -
Developing a Product-Service Business Model for a Semi-Process Manufacturing Company in the Digital Era
Høyer, Madeleine Ruiz (Master thesis, 2019)Hensikt. Økende digitalisering, konkurranse og kommoditisering tvinger produsenter til å vurdere nye måter å tilby produktene sine på slik at de kan forbli konkurransedyktige og bærekraftige. Smart «product-service systems» ... -
Developing circular logistics solutions: A case study of the Norwegian plastic pipe industry
Olsen, Hedda Oppedal (Master thesis, 2023)Forskning som omhandler håndtering av plastavfall ved materialens sluttfase er vesentlig mindre utforsket enn andre alternativer for avfallshåndtering, og gjennomført forskning som omhandler bærekraftige logistikkløsninger ... -
Development of a Replenishment Model towards Waste Reduction in a Fresh Food Supply Chain
Belardinelli, Laura (Master thesis, 2016)The reduction of waste is becoming an important goal at the strategic level in each type of company. The attention to waste reduction has increased in recent years. This because companies understood that it may lead to ... -
Digital Twin For Resource Management In Norwegian Shipyards
Liland, Enok (Master thesis, 2023)This master thesis explores the potential of digital twin technology to improve operational management in Norwegian shipyards. Amidst rising global competition and fluctuating demand in shipbuilding, Norwegian shipyards ... -
Digitalisering i kommunal avfallshåndtering
Swensen, Desirée Linnemørken (Master thesis, 2021)Denne masteroppgaven tar for seg håndtering av husholdningsavfall i Trondheim, og undersøker hvilke muligheter som skapes ved hjelp av digitalisering. Problemstillingen som forsøkes å besvare er; Hvordan stiller Trondheim ... -
The digitalization of manufacturing: investigating the impact of production environment and company size
Buer, Sven-Vegard; Strandhagen, Jo Wessel; Semini, Marco; Strandhagen, Jan Ola (Peer reviewed; Journal article, 2020)Purpose While manufacturing digitalization is currently considered an important enabler of competitive advantage, its applicability across the industrial spectrum is unclear. This paper aims to investigate the relationship ... -
Effect of Machine Sharing in Medical Laboratories
Bertnum, Aili Biriita; Berg, Roy Kenneth; Bergstøl, Stian; Strandhagen, Jan Ola; Semini, Marco Giovanni (Chapter, 2023)While medical research continuously develops new and innovative analysis methods, investing in new competence and resources is costly and challenging with the rigid budgeting of healthcare systems. This, combined with an ... -
An Efficient Production Transfer Process
Mogos, Maria Flavia (Doctoral theses at NTNU;2020:393, Doctoral thesis, 2020)