Institutt for materialteknologi: Nye registreringer
Viser treff 61-80 av 2509
-
Empowering CO2 Eco-Refrigeration with Colossal Breathing-Caloric-Like Effects in MOF-508b
(Peer reviewed; Journal article, 2023)Today, ≈20% of the electric consumption is devoted to refrigeration; while, ≈50% of the final energy is dedicated to heating applications. In this scenario, many cooling devices and heat-pumps are transitioning toward the ... -
Atomic Structure of Hardening Precipitates in Al-Mg-Si Alloys: Influence of Minor Additions of Cu and Zn
(Peer reviewed; Journal article, 2023)Shifting toward sustainability and low carbon emission necessitates recycling. Aluminum alloys can be recycled from postconsumer scrap with approximately 5% of the energy needed to produce the same amount of primary alloys. ... -
Synergistic effect between molybdenum back contact and CIGS absorber in the degradation of solar cells
(Peer reviewed; Journal article, 2024)The stability of molybdenum (Mo) back contact and Cu (InxGa(1-x)Se2(CIGS) absorber layers interfaces relevant for CIGS-based solar cells was investigated using accelerated aging test, considering humidity and temperature ... -
New insights into orthophosphoric acid assisted rapid aqueous processing of NMC622 cathodes
(Peer reviewed; Journal article, 2023)The use of orthophosphoric acid to stabilize aqueous processing of high nickel NMC622 electrodes was assessed under rapid processing conditions, in which the active material powder was in suspension for less than 1 hour. ... -
Modeling Alumina Feeding With the µ(I)-Rheology
(Journal article; Peer reviewed, 2023)Efficient feeding and dissolution of alumina are necessary in order to maintain a stable Hall–Héroult process. One dose of alumina contains several thousand grains, and simulating the motion of individual particles is in ... -
On the Use of a Cluster Identification Method and a Statistical Approach for Analyzing Atom Probe Tomography Data for GP Zones in Al–Zn–Mg(–Cu) Alloys
(Peer reviewed; Journal article, 2023)Early-stage clustering in two Al–Mg–Zn(–Cu) alloys has been investigated using atom probe tomography and transmission electron microscopy. Cluster identification by the isoposition method and a statistical approach based ... -
Modelling the Spatial Evolution of Excess Vacancies and its Influence on Age Hardening Behaviors in Multicomponent Aluminium Alloys
(Peer reviewed; Journal article, 2023)Excess vacancies play crucial roles in the precipitation of age-hardening precipitates in aluminium alloys, but their spatial evolution across grains during heat treatments is less known. In this work, a numerical model ... -
Modeling the Effect of Excess Vacancies on Precipitation and Mechanical Properties of Al–Mg–Si Alloys
(Peer reviewed; Journal article, 2023)A model for vacancy annihilation during aging has been combined with a precipitation model for coupled nucleation, growth, and coarsening in AA 6xxx series aluminum alloys. The simulation results were compared with ... -
Nanoscale Chemical Analysis of Ferroic Materials and Phenomena
(Doctoral theses at NTNU;2023:397, Doctoral thesis, 2023)The discovery of new physical phenomena in materials is closely linked to the progress in characterization and is propelled by the ability to observe and study physical processes occurring at the atomic level. Newly ... -
Enhanced grain growth and dielectric properties in aerosol deposited BaTiO3
(Peer reviewed; Journal article, 2023)Piezoelectric ceramics are envisioned as cell stimulating materials for in-vivo, load-bearing applications. To compensate for their brittle nature developing ceramic films on medically accredited metals is a promising ... -
Comparative kinetics study of different iron-containing pellets with hydrogen at isothermal conditions
(Peer reviewed; Journal article, 2023)Using hydrogen to produce iron is a promising way for the steel industry to achieve the goal of carbon neutrality. The reducibility of iron-bearing oxides by hydrogen significantly impacts the productivity and energy ... -
Cassie-Baxter and Wenzel States and the Effect of Interfaces on Transport Properties across Membranes
(Peer reviewed; Journal article, 2021)Mass transfer across a liquid-repelling gas permeable membrane is influenced by the state(s) of the liquid–vapor interface(s) on the surface of the membrane, the pore geometry, and the solid–fluid interactions inside the ... -
Boron trapping at dislocations in an additively manufactured polycrystalline superalloy
(Peer reviewed; Journal article, 2023)Segregation of solutes at dislocations in a nickel-based superalloy produced by laser powder bed fusion was investigated. Transmission electron microscopy has shown a high dislocation density present in the as-built ... -
Effect of Cu2+ on deposition mechanism and structure of ZrO2-based conversion coatings on AA6060 aluminium alloys and their susceptibility to filiform corrosion
(Peer reviewed; Journal article, 2024)Zirconium oxide-based conversion coatings (CCs) were prepared from hexafluorozirconic acid, H2ZrF6, with and without CuII as an additive. The CCs were prepared on primary and recycled AA6060. The deposition mechanism, ... -
Horizontal-to-tilt irradiance conversion for high-latitude regions: a review and meta-analysis
(Peer reviewed; Journal article, 2023)This review focuses on the solar irradiance model chain for horizontal-to-tilted irradiance conversion at high latitudes. The main goals of the work are 1) to assess the extent to which the literature accounts for decomposition ... -
Charge Transport in Water-NaCl Electrolytes with Molecular Dynamics Simulations
(Peer reviewed; Journal article, 2023)A systematic description of microscopic mechanisms is necessary to understand mass transport in solid and liquid electrolytes. From Molecular Dynamics (MD) simulations, transport properties can be computed and provide a ... -
Revealing mechanisms of activated carbon capacity fade in lithium-ion capacitors
(Peer reviewed; Journal article, 2023)The capacity fade mechanism of activated carbon (AC) electrode in Li-ion electrolyte was studied via electrochemical impedance spectroscopy (EIS) and post-mortem electrode characterizations at different stages of electrochemical ... -
Thermo-osmotic pressure and resistance to mass transport in a vapor-gap membrane
(Peer reviewed; Journal article, 2021)We have investigated the transport of fluid through a vapor-gap membrane. The transport due to a membrane temperature difference was investigated under isobaric as well as non-isobaric conditions. Such a concept is relevant ... -
Adamantyl Side Chains as Anti-Aggregating Moieties in Dyes for Dye-Sensitized Solar Cells
(Peer reviewed; Journal article, 2022)Designing and evaluating novel dye concepts is crucial for the development of the field of dye-sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti-aggregation additive chenodeoxycholic ... -
Insights on microstructural evolution and capacity fade on diatom SiO <inf>2</inf> anodes for lithium-ion batteries
(Peer reviewed; Journal article, 2023)is a promising material for developing high-capacity anodes for lithium-ion batteries (LIBs). However, microstructural changes of anodes at the particle and electrode level upon prolonged cycling remains unclear. In this ...