Blar i Institutt for materialteknologi på forfatter "Talic, Belma"
-
Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects
Talic, Belma; Molin, Sebastian; Wiik, Kjell; Hendriksen, Peter Vang; Lein, Hilde Lea (Journal article; Peer reviewed, 2017)MnCo2O4, MnCo1.7Cu0.3O4 and MnCo1.7Fe0.3O4 are investigated as coatings for corrosion protection of metallic interconnects in solid oxide fuel cell stacks. Electrophoretic deposition is used to deposit the coatings on ... -
Development of Asymmeteric Membranes for Oxygen Separation by Tape Casting and Dip Coating
Talic, Belma (Master thesis, 2013)Ceramic membranes made from mixed ionic and electronic conductive oxide materials have received much attention over the last decade due to their ability to separate oxygen from air at 100 % selectivity. The flux through ... -
Diffusion couple study of the interaction between Cr2O3 and MnCo2O4 doped with Fe and Cu
Talic, Belma; Hendriksen, Peter Vang; Wiik, Kjell; Lein, Hilde Lea (Peer reviewed; Journal article, 2019)Manganese cobalt spinel oxides are promising coating materials for the protection of ferritic stainless steel interconnects in solid oxide fuel cell (SOFC) stacks. The interaction between such coatings and the steel is ... -
Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects
Talic, Belma; Falk-Windisch, Hannes; Venkatachalam, Vinothini; Hendriksen, Peter Vang; Wiik, Kjell; Lein, Hilde Lea (Journal article; Peer reviewed, 2017)Manganese cobalt spinel oxides are promising materials for protective coatings for solid oxide fuel cell (SOFC) interconnects. To achieve high density such coatings are often sintered in a two-step procedure, involving ... -
Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU
Talic, Belma; Molin, Sebastian; Hendriksen, Peter Vang; Lein, Hilde Lea (Journal article; Peer reviewed, 2018)The ferritic stainless steel Crofer 22 APU is attractive for the use as interconnects in solid oxide fuel cell stacks. The oxidation rate of this alloy in air at 800 °C was reduced by pre-oxidation at higher temperatures ... -
Metallic Interconnects for Solid Oxide Fuel Cells: High Temperature Corrosion and Protective Spinel Coatings
Talic, Belma (Doctoral thesis at NTNU;2016:221, Doctoral thesis, 2016)Metallic Interconnects for Solid Oxide Fuel Cells: Increasing the share of renewable energy is important in the effort to limit global warming. The challenge with increased dependence on renewable energy sources such ... -
Thermal expansion and electrical conductivity of Fe and Cu doped MnCo2O4 spinel
Talic, Belma; Hendriksen, Peter Vang; Wiik, Kjell; Lein, Hilde Lea (Journal article; Peer reviewed, 2018)Manganese cobalt spinel oxides are promising coating materials for corrosion protection of metallic interconnects in solid oxide fuel cell stacks. This work investigates how Fe and Cu doping affect the crystal structure, ...