Blar i Institutt for materialteknologi på forfatter "Akselsen, Odd Magne"

Viser treff 1-8 av 8

    • Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting 

      Langelandsvik, Geir; Horgar, Annbjørg; Furu, Trond; Roven, Hans Jørgen; Akselsen, Odd Magne (Peer reviewed; Journal article, 2020)
      Wire and arc additive manufacturing (WAAM) of metallic materials is expected to become part of the new industrial revolution. The possibilities for complex designs and superior mechanical properties can in many cases replace ...

    • Development of Al-TiC Wire Feedstock for Additive Manufacturing by Metal Screw Extrusion 

      Langelandsvik, Geir; Grandcolas, Mathieu; Skorpen, Kristian Grøtta; Furu, Trond; Akselsen, Odd Magne; Roven, Hans Jørgen (Peer reviewed; Journal article, 2020)
      The development of customised aluminium alloys for welding and additive manufacturing (AM) is proposed to solve several quality issues and to enhance the mechanical integrity of components. The introduction of ceramic grain ...

    • EBSD Quantification of Retained Austenite in 9% Ni Steel Related to Thermal Treatments 

      Jahrsengene, Gøril; Wenn, Maia; Karlsen, Morten; Westermann, Ida; Akselsen, Odd Magne; Hjelen, Jarle (Chapter, 2015)
      The present work has been to study the effect of different finalizing preparation techniques on the amount of retained austenite measured with Electron Backscatter Diffraction (EBSD) and X-Ray-Diffraction (XRD) analysis. ...

    • Effect of Sigma Phase in Wire Arc Additive Manufacturing of Superduplex Stainless Steel 

      Akselsen, Odd Magne; Bjørge, Ruben; Ånes, Håkon Wiik; Ren, Xiaobo; Nyhus, Bård (Peer reviewed; Journal article, 2021)
      In the present study, the thermal program in wire and arc additive manufacturing has been varied in terms of heat input and interpass temperature. Three walls were completed with subsequent Charpy V impact toughness and ...

    • Investigation of Low Temperature Toughness and Crack Initiation In Welded Structural Steels 

      Vadholm, Therese (Master thesis, 2014)
      A 420 MPa HSLA steel has been investigated. Instrumented Charpy impact tests and quasi-static CTOD tests have been performed on specimens of weld simulated Coarse Grained Heat Affected Zone (CGHAZ) and Intercritically ...

    • Microstructure and Properties of Wire Arc Additive Manufacturing of Inconel 625 

      Akselsen, Odd Magne; Bjørge, Ruben; Ånes, Håkon Wiik; Ren, Xiaobo; Nyhus, Bård (Journal article; Peer reviewed, 2022)
      In the present investigation, wire arc additive manufacturing of Inconel 625 was carried out with the cold metal transfer variant of the metal inert gas process. The heat input varied between 0.46 and 0.63 kJ/mm, which is ...

    • Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing 

      Langelandsvik, Geir; Akselsen, Odd Magne; Furu, Trond; Roven, Hans Jørgen (Peer reviewed; Journal article, 2021)
      Processing of aluminum alloys by wire arc additive manufacturing (WAAM) gained significant attention from industry and academia in the last decade. With the possibility to create large and relatively complex parts at low ...

    • Wire and Arc Additive Manufacturing with TiC-Nanoparticle Reinforced AA5183 Alloy 

      Langelandsvik, Geir; Ragnvaldsen, Olav; Flåm, Jan Eskil; Akselsen, Odd Magne; Roven, Hans Jørgen (Peer reviewed; Journal article, 2020)
      Wire and arc additive manufacturing of aluminium-ceramic composites shows great potential to produce high strength materials. By incorporation of nanoparticles in the feedstock wire, fine-grained material with low ...