Blar i Institutt for kjemisk prosessteknologi på utgivelsesdato
Viser treff 61-80 av 1760
-
Characterization of solid particle suspensions with organic coatings in oilfield produced water
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:226, Doctoral thesis, 2008)Produced water is water trapped in underground formations that is brought to the surface along with oil or gas. In general, produced water is a mixture of dispersed oil in water (o/w), dissolved organic compounds (included ... -
Optimal Operation of Refrigeration Cycles
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:91, Doctoral thesis, 2008) -
Au-TiO2 catalysts supported on carbon nanostructures for CO removal reactions
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:269, Doctoral thesis, 2008) Awareness of the climatic changes due to emission of CO2 and other greenhouse gases to the atmosphere has made ... -
Preparation and characterization of Cu- and Pt-based water-gas shift catalysts
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:123, Doctoral thesis, 2008) -
Preperation and characterization of Cu- and Pt-based water-gas shift cataysts
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:123, Doctoral thesis, 2008) -
Mechanisms of water-in-crude oil emulsion formation, stabilization and resolution by electrostatic means.
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:121, Doctoral thesis, 2008)Oil reserves are declining all over the world. Nevertheless the age of oil is probably bound to last for several years still, even though the growth of the world energy consumption will lead to a faster depletion than the ... -
Yield-increasing additives in kraft pulping: Effect on carbohydrate retention, composition and handsheet properties
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:137, Doctoral thesis, 2008) -
Modeling and Simulations of Reactive Two-Phase Flows in Fluidized Beds
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:161, Doctoral thesis, 2008) -
Stabilization of desired flow regimes: using active control
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:317, Doctoral thesis, 2008) -
Emulsions (w/o and o/w) of HeavyCrude Oils.Characterization, Stabilization,Destabilization and ProducedWater Quality
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:285, Doctoral thesis, 2008) -
Development of a FSC membrane for selective CO2 capture
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:164, Doctoral thesis, 2009) -
Characterization of SiC and SiO2 in PEG suspensions
(Master thesis, 2009) -
Heat of reaction and VLE of post combustion CO2 absorbents
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:50, Doctoral thesis, 2009)The energy required to operate CO2 capture systems at present significantly reduces the overall efficiency of fossil fuel based power generation and other industrial processes and leads to increased fuel requirements, solid ... -
Development of Fracture Mechanics to Study End Use of Paper Webs
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:29, Doctoral thesis, 2009)This thesis deals with the application of fracture mechanics to study the strength of paper webs. The main aim of fracture mechanics is to predict the critical combination of defect size, structure geometry and external ... -
Characterization of diethylenetriamine (DETA) as absorbent for CO2
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:130, Doctoral thesis, 2009)Absorption of CO2 with amine-based absorbents is an established and proven technology. Unfortunately, it is still very energy intensive and has high capital costs. The overall challenge when aiming at using this technology ... -
Model Compounds for Heavy Crude Oil Components and Tetrameric Acids: Characterization and Interfacial Behaviour
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:173, Doctoral thesis, 2009)The tendency during the past decades in the quality of oil reserves shows that conventional crude oil is gradually being depleted and the demand being replaced by heavy crude oils. These oils contain more of a class ... -
Membrane Separation of Natural Gas at Tjeldbergodden
(Master thesis, 2009) -
Crystal Growth Phenomena and Filtration: Morphology and Size Effects for Selected Industrial Compounds
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:237, Doctoral thesis, 2009)Variation of crystallization parameters allows for the control of important particle properties, such as morphology, size and size distribution, which influence down-stream processes like solid-liquid separation, powder ...