Show simple item record

dc.contributor.authorLa Rosa, Angela Daniela
dc.contributor.authorGreco, Sebastiano
dc.contributor.authorTosto, Claudio
dc.contributor.authorCicala, Gianluca
dc.identifier.citationJournal of Cleaner Production. 2021, 304, .en_US
dc.description.abstractThe case study presented in this paper is a follow up of a topic already examined in previous studies relating the life cycle assessment (LCA) of a chemical treatment process used to recycle a specific type of carbon fiber (CF) reinforced thermoset composite. In the present study the LCA is coupled with the life cycle cost (LCC) analysis for the economic assessment. Furthermore, the research sought to specify the best available technology for the reuse of the materials recovered through the chemical recycling process. The new LCA results are more reliable and more current than the scenario presented in the previous LCA studies. In the previous scenario the possibility to recover long carbon fibers “ready to use” was considered. This scenario, even if under investigation by the recycling company, is still not possible for technological limitations as the fibers recovered after the chemical process require further treatments before being used in thermoset composite. Consequently, a more feasible technology was investigated and, according to our laboratory research results, one practical way to recycle the CF-thermoset composites is to shred them before the chemical treatment in order to recover shredded CFs and epoxy thermoplastic from cleavable thermosets. These materials can be easily compounded together to manufacture a CF-thermoplastic composite through injection moulding as we demonstrated herein through some laboratory experiments. The LCA and LCC were accounted for the recycling process via solvolysis up to the recovery phase of the epoxy-thermoplastic resin and the short carbon fibers. The paper presents laboratory test results of the remanufacture of the two reclaimed materials for the production of a thermoplastic CF-composite.en_US
dc.publisherElsevier Scienceen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.titleLCA and LCC of a chemical recycling process of waste CF-thermoset composites for the production of novel CF-thermoplastic composites. Open loop and closed loop scenariosen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.source.journalJournal of Cleaner Productionen_US

Files in this item


This item appears in the following Collection(s)

Show simple item record

Navngivelse 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Navngivelse 4.0 Internasjonal