Vis enkel innførsel

dc.contributor.authorSaettone, Simone
dc.contributor.authorTaskar, Bhushan
dc.contributor.authorRegener, Pelle
dc.contributor.authorSteen, Sverre
dc.contributor.authorAndersen, Poul
dc.date.accessioned2021-04-09T11:33:55Z
dc.date.available2021-04-09T11:33:55Z
dc.date.created2021-03-17T20:08:19Z
dc.date.issued2020
dc.identifier.citationApplied Ocean Research. 2020, 99:102011 1-14.en_US
dc.identifier.issn0141-1187
dc.identifier.urihttps://hdl.handle.net/11250/2737133
dc.description.abstractMaritime transport is the most energy-effective mode to move large amounts of goods around the world. Hauling cargo via waterway produces an enormous quantity of greenhouse gas emissions. Vessel fuel efficiency directly influences ship emissions by affecting the amount of burnt fuel. Optimizing ships operating in waves rather than in calm water conditions could decrease the fuel consumption of vessels. In particular, ship propellers are traditionally designed neglecting dynamic conditions such as time-varying wake distribution and propulsion factors, propeller speed fluctuations, ship motions, and speed loss. The effect of waves on the propeller performance can be evaluated using both a quasi-steady and a fully-unsteady approach. The former is a fast computational approximation method based on the assumption that the ratio of propeller angular frequency to wave encounter frequency is sufficiently large. The latter provides a complete representation of the propeller dynamics, but it is computationally expensive. The purpose of this paper is to compare the propeller performance in the presence of waves using the quasi-steady and the fully unsteady approach. This analysis is performed by observing the differences in unsteady propeller forces, cavitation volume, and hull pressure pulses between the two approaches. The full-scale KVLCC2 propeller is utilized for the investigation. Results show a good agreement between the quasi-steady and the fully-unsteady approach in the prediction of the temporal mean and the fluctuation amplitude of KT and KQ, the cavity volume variation, and the hull pressure pulses. Therefore, for the considered operating conditions, the quasi-steady approach can be used to compute the propeller performance in waves.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleA comparison between fully-unsteady and quasi-steady approach for the prediction of the propeller performance in waves: Prediction of the propeller performance in wavesen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionacceptedVersionen_US
dc.source.pagenumber1-14en_US
dc.source.volume99:102011en_US
dc.source.journalApplied Ocean Researchen_US
dc.identifier.doi10.1016/j.apor.2019.102011
dc.identifier.cristin1898847
dc.description.localcode"© 2020. This is the authors’ accepted and refereed manuscript to the article. Locked until 28.4.2022 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ "en_US
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal