Blar i Publikasjoner fra CRIStin - NTNU på emneord "CFD"
Viser treff 1-17 av 17
-
A 2D sediment bed morphodynamics model for turbulent, non-Newtonian, particle-loaded flows
(Chapter, 2017)In petroleum drilling, cuttings transport problems, i.e. an accumulation of drilled of solids in the wellbore, are a major contributor to well downtime and have therefore been extensively researched over the years, both ... -
Depressurization of in a pipe: Effect of initial state on non-equilibrium two-phase flow
(Peer reviewed; Journal article, 2023)It is key in several industrial applications to accurately describe rapid depressurization of liquid and dense phase states. Examples include refrigeration systems, nuclear reactor cooling and capture and storage (CCS). ... -
Divergence-conforming discretization for Stokes problem on locally refined meshes using LR B-splines
(Journal article; Peer reviewed, 2015)To solve the incompressible flow problems using isogeometric analysis, the div-compatible spline spaces were originally introduced by Buffa et al. (2011), and later developed by Evans (2011). In this paper, we extend the ... -
Effect of turbulence intensity on the performance of an offshore vertical axis wind turbine
(Journal article; Peer reviewed, 2015)Offshore wind energy is one of the most competitive renewable energy resources available to us, which until now been under- exploited. Most of the problems associated with wind farm installation like land acquisition, low ... -
Experimental Investigations of Breaking Wave Impact Forces on a Monopile Substructure for Offshore Wind Turbines Under Regular Breaking Waves
(Chapter, 2017)The main objective of the paper is to investigate wave impact forces from breaking waves on a monopile substructure for offshore wind turbine in shallow waters. This study examines the load assessment parameters relevant ... -
HLLC-type methods for compressible two-phase flow in ducts with discontinuous area changes
(Peer reviewed; Journal article, 2021)In this work, the Harten-Lax-van Leer Contact (HLLC) approximate Riemann solver is extended to two-phase flow through ducts with discontinuous cross-sections. Two main strategies are explored regarding the treatment of the ... -
Implementation and comparison of three isogeometric Navier–Stokes solvers applied to simulation of flow past a fixed 2D NACA0012 airfoil at high Reynolds number
(Journal article; Peer reviewed, 2015)Implementation of three different Navier–Stokes solvers in an isogeometric finite element framework is presented in this paper. The three solvers Chorin projection method and Coupled formulation , both with the Spalart–Allmaras ... -
Inverse modelling of interfacial tension between ferroalloy and slag using openfoam
(Chapter, 2020)The entrainment of molten ferroalloy droplets in slag during tapping operations is strongly related to turbulence and interfacial forces between alloy and slag. Therefore, interfacial phenomena are of great importance for ... -
Investigation of the impact of wakes and stratification on the performance of an onshore wind farm
(Journal article; Peer reviewed, 2015)This work investigates the effects of wakes and stratification on the performance of turbines operating in the Bessaker wind farm. The wind farm is located in a highly complex terrain. Most dominant wind directions recorded ... -
Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
(Journal article, 2016)A new residual-based variational multiscale (RBVMS) formulation for incompressible turbulent flows is proposed that is suitable for discretization using divergence-conforming B-splines. The proposed methodology results in ... -
Isogeometric methods for CFD and FSI-simulation of flow around turbine blades
(Journal article; Peer reviewed, 2015)Coupled fluid-structure interaction simulations of wind turbines have traditionally been considered computationally too expensive to carry out. However, more powerful computers and better solution techniques based on ... -
LES and RANS simulation of onshore Bessaker wind farm: analyzing terrain and wake effects on wind farm performance
(Journal article; Peer reviewed, 2015)This work compares the predictive performance of RANS and LES solver in capturing the effect of terrain and wakes on the performance of the Bessaker wind farm. This 25 turbine wind farm is located in a highly complex terrain ... -
Numerical Analysis of NREL 5MW Wind Turbine: A Study Towards a Better Understanding of Wake Characteristic and Torque Generation Mechanism
(Journal article; Peer reviewed, 2016)With the increased feasibility of harvesting offshore wind energy, scale of wind turbines is growing rapidly and there is a trend towards clustering together higher number of turbines in order to harvest maximum yield and ... -
Numerical benchmarking of fluid–structure interaction: An isogeometric finite element approach
(Journal article; Peer reviewed, 2016)In this paper we describe and evaluate an isogeometric finite element program, IFEM-FSI, for doing coupled fluid–structure interaction simulations. We investigate the role played by employing higher polynomial orders and ... -
Particle segregation in turbulent Couette-Poiseuille flow with vanishing wall shear
(Journal article, 2017)Inertial particles dispersed in wall-bounded flows in pipes and channels are known to accumulate close to the walls. The segregation ability depends greatly on the inertia-selection effects of the near-wall quasi-coherent ... -
A Review of Ferroalloy Tapping Models
(Peer reviewed; Journal article, 2021)Tapping is an important furnace operation in the ferroalloy industry and poses a number of complex and coupled challenges of both practical and economical importance. Owing to the hazardous high-temperature conditions ... -
Simulation of airflow past a 2D NACA0015 airfoil using an isogeometric incompressible Navier-Stokes solver with the Spalart-Allmaras turbulence model
(Journal article; Peer reviewed, 2015)The work presented in this paper concerns the efforts of conducting a computational fluid dynamics (CFD) simulation of air flow past a fixed 2D NACA0015 airfoil at high Reynolds number (Re=2.5×106Re=2.5×106) using an ...